Академический Документы
Профессиональный Документы
Культура Документы
V100R015C00
Issue 01
Date 2015-02-14
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Purpose
This document describes the LTE Coverage and Capacity Optimization (CCO) RF Based
feature, including implementation principles, related features, network impact, and engineering
guides.
Related Versions
The following table lists the product versions related to this document.
SONMaster V100R015C00
Intended Audience
This document is intended for:
l System engineers
l Network management engineers
Change History
01 (2015-02-14)
This is the first commercial release of V100R015C00.
Compared with Draft A (2015-01-15) for V100R015C00, this issue does not include any
changes.
Draft A (2015-01-15)
This is a draft for V100R015C00.
Compared with Draft A (2014-10-15) for V100R014C01, this issue does not include any
changes.
Organization
1 Overview
2 Technical Description
3 Related Features
4 Network Impact
5 Version Mapping
6 Engineering Guidelines
7 Feature Specifications
8 References
Conventions
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Symbol Description
General Conventions
The general conventions that may be found in this document are defined as follows.
Convention Description
Command Conventions
The command conventions that may be found in this document are defined as follows.
Convention Description
GUI Conventions
The GUI conventions that may be found in this document are defined as follows.
Convention Description
Keyboard Operations
The keyboard operations that may be found in this document are defined as follows.
Format Description
Key Press the key. For example, press Enter and press Tab.
Key 1+Key 2 Press the keys concurrently. For example, pressing Ctrl+Alt
+A means the three keys should be pressed concurrently.
Key 1, Key 2 Press the keys in turn. For example, pressing Alt, A means
the two keys should be pressed in turn.
Mouse Operations
The mouse operations that may be found in this document are defined as follows.
Action Description
Click Select and release the primary mouse button without moving
the pointer.
Drag Press and hold the primary mouse button and move the
pointer to a certain position.
Contents
3 Related Features...........................................................................................................................23
4 Network Impact...........................................................................................................................24
5 Version Mapping.........................................................................................................................25
6 Engineering Guidelines.............................................................................................................26
6.1 Activation Advice.........................................................................................................................................................27
6.2 Information Collection Before the Deployment...........................................................................................................27
6.3 Feature Deployment.....................................................................................................................................................30
6.3.1 Deployment Requirements........................................................................................................................................30
6.3.2 Data Preparation........................................................................................................................................................31
6.3.3 Process.......................................................................................................................................................................67
6.3.4 Activation Observation..............................................................................................................................................68
6.3.5 Feature Deactivation..................................................................................................................................................69
6.4 Monitoring....................................................................................................................................................................69
6.5 (Optional) Performance Optimization..........................................................................................................................72
7 Feature Specifications.................................................................................................................78
8 References.....................................................................................................................................79
1 Overview
Background
About half of the total operating expense (OPEX) of a typical network is network planning and
optimization costs in which the costs of drive tests (DTs), performance analysis, and problem
location take majority. Performance analysis and problem location involve analyzing and
handling antenna problems. DTs are mainly used to solve network coverage problems and
require high costs.
Traditional optimization depends on manual experience, and the optimization efficiency is low.
Generally, when adjusting the azimuth or downtilt angle of an antenna through traditional
optimization, engineers identify the problem by performing a DT and then provide adjustment
advice based on manual experience. After a tower operator climbs up to the antenna tower and
adjust the azimuth or downtilt angle, another DT is performed to check whether the problem
persists. The preceding operations may be performed repeatedly to solve one problem.
LTE CCO provided by Huawei is based on automatic analysis and helps you efficiently solve
network coverage and capacity problems.
Definition
Using automatic cell planning (ACP), LTE CCO provided by Huawei automatically finds the
optimal values of RF parameters and optimizes network coverage and capacity. The functions
of CCO and ACP are as follows:
l CCO: optimizes network coverage and capacity with least manual intervention, thereby
reducing network OM costs.
l ACP: automatically locates the optimal values of RF parameters such as Transmit
Power, Antenna E-Tilt Angle, Mechanical Tilt Angle, and Azimuth using the intelligent
searching algorithm.
Figure 1-1 shows the sources of SONMaster analysis data on the network. Table 1-2 describes
the data sources.
SIG The data is obtained from the eNodeB. It provides neighboring cell
signal level and quality information for optimization analysis.
Mandatory data E-maps and antenna files are manually imported on the SONMaster.
They are used to view clutter height and altitude information and
obtain antenna parameters in the GIS window.
Different types of data also need to be imported according to the
optimization mode:
l If Optimization Mode is set to MDT, the SONMaster also
collects MDT data. The collected MDT data is mainly used for
determining coverage exceptions based on MR data and
generating the feature database and pass loss matrix.
l If Optimization Mode is set to External feature database and
path loss matrix, you need to manually import the external
feature database and path loss matrix.
Benefits
LTE CCO brings the following benefits:
l Improved network coverage and capacity optimization efficiency
This feature automatically collects and processes network data, detects coverage and
capacity problems on wireless networks, performs associated optimization based on the
problems, and adjusts RF parameters. This reduces the dependencies on manual invention,
shortens the waiting time, implements network optimization anytime and anywhere, and
improves network optimization, operation, and maintenance efficiency.
l Reduced network coverage and capacity optimization costs
This feature is automated. The optimization advice confirmed by telecom operators will be
automatically applied. This reduces manual invention and network OM costs.
l Improved network performance
This feature optimizes network coverage and capacity, thereby achieving better network
coverage, load balancing, and maximum radio resource usage. This helps reduce network
problems caused by coverage exceptions and load imbalance, and improve network
performance.
Application Scenarios
Table 1-3 describes application scenarios of LTE CCO.
NOTE
2 Technical Description
2.2 Principles
Concept Description
Problematic Sets of optimization objects that encounter problems, such as cells and base
area stations. Such sets are detected by CCO in each optimization process.
Problematic areas have the following characteristics:
l Each problematic area is covered by an optimization area.
l Each problematic area corresponds to one optimization task. Problematic
areas vary according to optimization tasks.
l Problematic areas are relative to optimization periods. The problematic
areas for an optimization task may vary in different optimization periods.
The following is an example of problematic area identification. Once CCO
detects that cell A encounters a problem, adjacent cells of cell A (for example,
cell B and cell C) are added to the problematic area according to certain
principles even though cell B and cell C do not encounter any problem. In
this scenario, cell A, cell B, and cell C belong to the problematic area, and
cell A is identified as a problematic cell.
Path loss Matrix that reflects the path loss from an antenna to each grid point. The path
matrix loss matrix is an important input of generating optimization advice.
Based on the assisted MDT data with location information, which is collected
from the live network by radio access technology (RAT), you can create a
relatively accurate path loss matrix for each RAT.
If no MDT data is collected from the network, path loss can be calculated
according to propagation models. However, traditional propagation models
are inapplicable to densely-populated urban areas. If the parameters for a
mature commercial ray tracking model are not corrected, the path loss
calculated according to the model results in calculation errors.
NOTE
Path loss: loss occurs when RF waves are transmitted through the air, which has a
filtering effect on the signal.
Grid: geographic area divided according to a certain resolution. For example, if the
resolution is 50 meters, each grid refers to a geographic area covering 2500 square
meters.
Concept Description
MR locating Generate grid-level data required for generating the optimization advice.
Two MR locating methods are available:
l Feature-database-based locating: requires the engineering parameters,
feature database, and MR data source.
l Quick locating: requires only the engineering paramters and MR data
source.
2.2 Principles
Figure 2-1 shows the basic principle of LTE CCO RF Based. Table 2-2 describes each step
in Figure 2-1.
Number Description
2 Collect data.
Collect CM/PM/SIG data.
Figure 2-2 shows the process of LTE CCO. For details, see Table 2-3.
1 Create and Create a CCO task. Based on data sources, this feature applies to the
start an following scenarios:
optimization l Based on MDT data
task If MDT data can be collected, this mode is prioritized.
– Advantage: The feature is effective and highly automated in
this mode.
– Disadvantage: Terminals must support MDT reporting.
l Based on the external feature database and path loss matrix.
This mode is recommended if the MDT data cannot be collected
but telecom operators provide the DT data or path loss matrix.
– Advantage: You do not need to enable other features in this
mode.
– Disadvantage: The feature in this mode is less effective than
that in MDT mode, and the automation level is low.
l Based on quick location
This mode is recommended if the MDT data cannot be collected
and telecom operators do not provide the DT data or path loss
matrix.
– Advantage: You do not need to enable other features in this
mode, and the feature in this mode is highly automated.
– Disadvantage: The feature in this mode is with the less
effectiveness.
After you start a CCO task, the SONMaster collects raw
performance data of all cells involved in the task.
4 Generate Based on the collected MR data of the cells in the problematic area,
optimization the SONMaster generates the following optimization policy
policy parameters:
parameters l Problematic area priority parameters: specify the priority of each
problematic area and that of each problem type based on the
types and severities of problems in each problematic area.
l Optimization objective parameters: specify the objective
parameters for each type of problem. Telecom operators'
requirements on signal level and interference values must be
considered.
l Grid-level busy-hour counters for problematic areas: For load
balancing, the SONMaster provides grid-level busy-hour
counters such as DL throughput and traffic volume to ACP to
determine cell traffic status.
l Other control parameters: specify control parameters restricted
by the onsite network conditions, such as the adjustment ranges
and steps for the azimuth, mechanical downtilt angle, electrical
downtilt angle, and power parameters.
NOTE
Setting the objective fitness function is critical to ACP. The parameters for
the objective fitness function and the related optimization policies, which are
required for ACP, are generated in this procedure.
5 ACP The SONMaster automatically finds and displays the optimal values
of RF parameters for each problematic area. Based on the optimal
values of RF parameters, the SONMaster predicts the signal level,
quality, and KPIs for the problematic area that the optimization
advice will be applied. In addition, the SONMaster compares the
optimization simulation effect with the situation before the
optimization to help you confirm the optimization advice.
l For coverage optimization, the SONMaster displays the signal
level and quality CDF curves for each problematic area.
l For load balancing optimization, the SONMaster displays the
cell load and grid-level PDSCH SINR CDF curve. The curve
represents the channel quality experienced by cell edge users
(CEUs).
NOTE
ACP is based on intelligent iterative optimization. Intelligent iterative
optimization stops when any of the following conditions is met:
l The optimization objective is achieved. The optimization objective is
specified in the objective fitness function of the ACP module.
l The number of iteration times reaches. If the optimization objective is
not achieved for a long time, the iteration automatically stops when the
number of iteration times reaches.
l The gains between two iterations do not reach the threshold. For example,
there are limited gains brought by consecutive iterations.
6 Deliver and After generating optimization advice, the SONMaster delivers the
execute advice in any of the following modes:
optimization l Manual delivery mode: After confirming the generated
advice optimization advice, you can choose to deliver all of, part of, or
none of the optimization advice.
l Schedule delivery mode: The SONMaster delivers the
optimization advice to eNodeBs through the related interface at
a specified time point.
l Instant delivery mode: The SONMaster directly delivers the
optimization advice to eNodeBs through the related interface.
NOTE
You are allowed to select a mode for delivering optimization advice. When
the optimization advice contains only the electrical downtilt angle and pilot
power settings, the free mode is allowed. When the optimization advice
contains the azimuth and mechanical downtilt angle settings, the free mode
is not allowed because the azimuth and mechanical downtilt angle must be
manually adjusted.
7 Evaluate the After delivering optimization advice, the SONMaster evaluates the
optimization optimization effect. If performance deteriorates, the SONMaster
effect and rolls back the RF parameters. That is, the SONMaster delivers the
roll back RF parameters configured before the optimization to eNodeBs
parameters through the U2000.
Optimization effect evaluation and rollback are divided into the
following categories:
l Quick optimization effect evaluation and rollback: is based on
the monitored KPIs before and after the optimization. With a
limited period of time (for example, eight hours), the SONMaster
checks whether KPIs deteriorates severely. If KPIs deteriorates
severely, the SONMaster conducts a quick rollback.
l Coverage optimization effect evaluation and rollback: applies
only to coverage optimization and is based on the cell-level MR
coverage statistics and KPIs before and after the optimization.
With a limited period of time (for example, three days), the
SONMaster checks whether KPIs or network coverage
deteriorates severely in the monitored problematic area. If any
KPI or network coverage deteriorates severely, the SONMaster
conducts an RF parameter rollback.
l Coverage and capacity optimization effect evaluation and
rollback: applies only to the problematic areas where load
balancing optimization is performed and RF parameters are not
rolled back. Within a limited period of time (for example, three
days), the SONMaster checks whether the coverage, overload
amount, number of pairs of cells with unbalanced load, or
throughput deteriorates severely in the monitored problematic
area. If any of the preceding items deteriorates severely, the
SONMaster conducts an RF parameter rollback.
l Slow optimization effect evaluation and rollback: applies only
to the problematic areas where coverage optimization or
coverage and capacity optimization is performed and RF
parameters are not rolled back. With a limited period of time (for
example, one day), the SONMaster collects grid-level coverage
statistics and displays KPIs, cell-level MR coverage counters,
and grid-level coverage counters for you to compare and analyze.
In this scenario, CCO does not provide the effect evaluation or
automatic RF parameter rollback function. However, you are
allowed to manually perform an RF parameter rollback.
N/A
1 Task searching Allows you to search for a task by Service type, Cell ID, or Cell
name.
3 Task attributes Displays the status and attributes of a specific optimization task.
l An optimization task is marked with different icons according
to the task status:
3 Toolbar for the Provides the functions of adding, deleting, refreshing, and saving
optimization an optimization parameter template.
parameter
template
l Figure 2-7 shows the ACP parameter configuration wizard. Table 2-8 describes the
elements in the wizard.
l Figure 2-8 shows the optimization advice management wizard. Table 2-9 describes the
elements in the wizard.
l Figure 2-9 shows the optimization effect evaluation wizard. Table 2-10 describes the
elements in the wizard.
6 List of cells in Lists all cells in the problematic area constructed within the
the current optimization period.
problematic
area
1 Tabs Consist of the Problematic Area List and Cell List tab pages.
You can click Problematic Area List (or Cell List) to expand
or collapse the list for setting problematic area weights (or the
list for setting RF parameters for problematic cells).
1 Toolbar for Displays the report time of the optimization advice within
optimization historical optimization periods, and provides the functions of
advice refreshing, filtering, exporting, saving, executing, and rolling
back optimization advice, evaluating optimization effect, and
starting optimization of the next round.
NOTE
Saving optimization advice: For inappropriate optimization advice, you
can double-click a parameter value, enter a new value, and then click
1 Toolbar for Displays the report time of the optimization advice within
optimization historical optimization periods, and provides the functions of
advice refreshing, filtering, exporting, and rolling back optimization
advice, displaying optimization effect evaluation results, and
starting optimization of the next round.
NOTE
Table 2-11 Description of the window for statistics about optimization exceptions
2 Statistics by You can view the statistics about unconfirmed exceptions during
exception type the current optimization period in a bar chart based on the
exception types, including license, engineering parameter,
configuration data, network KPI, and service running exceptions.
3 Related Features
4 Network Impact
5 Version Mapping
For details about how to activate this feature, and mapping between the SONMaster, NE
software, and other software, see iManager SONMaster V100R015***_ReleaseDoc_ENG.
6 Engineering Guidelines
This section describes LTE FDD DL Coverage Optimization RF Based and LTE FDD DL
Capacity Optimization RF Based in detail as an example. The descriptions also apply to LTE
TDD DL Coverage Optimization RF Based and LTE TDD DL Capacity Optimization RF Based.
6.4 Monitoring
3. Whether data The following data must be The data that needs to be
prepared for task prepared for CCO: prepared is as follows:
creation meets l Engineering parameters l Engineering parameters:
requirements You need to obtain the
l Antenna files
accurate engineering
l E-maps parameters for cells to be
l Propagation models optimized, such as the
mechanical downtilt angle,
azimuth, and site height.
l Antenna files: You need to
prepare the original antenna
pattern files corresponding
to the cell antenna model. If
a RET antenna is used, the
antenna pattern files
corresponding to different
electrical downtilt angles
(for example, 0 to 10
degrees) are included.
Antenna pattern files are
used for calculating antenna
gains during optimization
advice generation. An
improper antenna file will
affect the evaluation
accuracy. If no original
antenna pattern file
corresponding to the cell
antenna model is available,
you can use different types
of antenna files that have the
same beamwidth and
antenna gain.
l E-maps: You need to
prepare the e-maps
corresponding to the
optimization area. The e-
maps must be the grid maps
provided by Mapinfo, and
the precision is 20 m.
l Propagation models: You
need to collect the
propagation model
corresponding to the radio
environment of the
optimization area.
4. Whether data You need to prepare the The data that needs to be
meets following data when the prepared is as follows:
requirements optimization mode is set to l Feature database:
when the External feature database
optimization and path loss matrix: – If the feature database is
mode is set to unavailable, you need to
l Feature database prepare the feature
External feature
database and l DT data database corresponding
path loss matrix to the optimization area
(Strength of the signal
level for each cell at each
location). You also need
to convert the format of
the feature database
provided by the customer
to the format required by
Huawei.
– If the feature database is
unavailable but DTs can
be performed, you need
to perform DTs to obtain
DT data.
– If the feature database is
unavailable and DTs
cannot be performed,
you cannot set the
optimization mode to
External feature
database and path loss
matrix.
l DT data: You need to
prepare the DT data
corresponding to the
optimization area to correct
the feature database.
l NE Function Requirements
None
You must prepare the following data before deploying LTE FDD DL Coverage Optimization
RF Based:
l LTE engineering parameters, as listed in Table 6-2.
l Optimization zones and optimization object parameters, as listed in Table 6-3.
l Optimization policy parameters, as listed in Table 6-4.
l Adjustable RF parameters for problematic areas, which specify the adjustment range for
RF parameters. The adjustable RF parameters are classified into the following types:
– Cell-level adjustable RF parameters: specify the adjustment range for RF parameters
for a cell and support addition, deletion, modification, and batch configuration. Table
6-5 lists cell-level adjustable RF parameters.
– Network-level adjustable RF parameters: serve as default parameters and take effect for
all cells on the network. If the cell-level adjustable RF parameters are not set for a cell,
the network-level adjustable RF parameters take effect. Parameters specifying the
maximum value, minimum value, and adjustment step are included in both the cell- and
network-level adjustable RF parameters, with same default values provided. Note that
the Adjustable parameter is included only in the cell-level adjustable RF parameters.
l Antenna type selection: You need to import the antenna data file before selecting antenna
types. For detailed operations, see (Optional) Importing the Antenna Data Files in Getting
Started.
l Cell propagation model parameters, as listed in Table 6-6.
Vendor This parameter specifies the vendor types of the optimization objects.
l If this parameter is set to Huawei, the optimization objects are all
the Huawei cells managed by the SONMaster.
l If this parameter is set to Ericsson, the optimization objects are
all the Ericsson cells managed by the SONMaster.
l If this parameter is set to NSN, the optimization objects are all the
NSN cells managed by the SONMaster.
RAT This parameter specified the type of the cells to be optimized. You
are advised to set this parameter when the optimization objects are
cells.
l If this parameter is set to GSM, the cells to be optimized are GSM
cells.
l If this parameter is set to UMTS, the cells to be optimized are
UMTS cells.
l If this parameter is set to LTE, the cells to be optimized are LTE
cells.
Cell List Available Objects and Selected Objects are displayed in navigation
trees. You can select cells to be optimized by using any of the
following methods: navigation tree, template import, and GIS
window.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
During a
performance
KPI monitoring
period, the
SONMaster
collects
performance
data within the
KPI monitoring
time range.
When the
monitoring
period ends, the
SONMaster
calculates KPIs
to check
whether any cell Cov
Value N
with abnormal erag
range: 1 to e
KPIs exists. e/
30 xt
KPI Monitor The trigger Loa
- - Y - p
Days conditions for Default d
er
KPI monitoring value: 7 bala
io
are as follows: Unit: day ncin
d
g
l After you
start a CCO
task, the
SONMaster
collects
performance
data of all
cells in the
optimization
area.
l After
delivering
optimization
advice, the
SONMaster
collects
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
performance
data of all
cells in the
problematic
area for
quick
evaluation
and coverage
and capacity
evaluation.
This parameter
The value
specifies the
range is
time range for
from 0 to
collecting
23. The
performance
value 0
data. You are
indicates
allowed to select
the time Cov
multiple N
segment erag
options. If you e
from e/
do not set this xt
KPI Monitor 00:00:00 to Loa
parameter, the - - Y - p
Time 00:59:59. d
parameter er
You can bala
verification io
infer the ncin
fails. d
other time g
You are advised segments in
to set the the same
SONMaster to way.
collect
Default
performance
values: 8
data within busy
and 17
hours.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
specifies the
maximum
number of days
that MDT data is
collected for
cells in the
problematic
area.
The collected
MDT data is
used to create
the feature
database and
path loss matrix.
After collecting Cov
MDT data for Value N
erag
one day, the range: 1 to e
e/
Max. MDT SONMaster 30 xt
Loa
Collection automatically - - Y - p
Default d
Days checks whether er
value: 7 bala
the collected io
Unit: day ncin
MDT data meets d
g
the
requirements of
the feature
database. If the
requirements
are not met, the
SONMaster
continues to
collect such data
at a step of one
day until the
number of days
that MDT data is
collected
reaches the
value of this
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
parameter. The
SONMaster also
calculates the
number of days
that MDT data is
collected. The
calculation
value helps
optimize the
parameter for
specifying the
MDT data
collection
duration
required by the
feature
database.
This parameter
is configurable
only when
Optimization
Mode is set to
MDT. This
parameter
restricts the
number of days
that MDT data is
collected before
optimization.
This parameter
also restricts the
number of days
that MDT data is
collected after
optimization if
Generate
Coverage Map
After
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Optimization is
set to YES.
During MR data
collection, the
SONMaster
collects MR
data of all cells
in the
problematic
area within the
specified MR
data collection
time range
based on the
specified Cov
Value N
number of days erag
range: 1 to e
that MR data is e/
30 xt
MR Collection collected. Loa
- - Y - p
Days Default d
Based on the er
value: 3 bala
collected MR io
Unit: day ncin
data, the d
g
SONMaster
calculates the
coverage-
related weight
and generates
the all MR-
based traffic
map for ACP
and
optimization
effect
evaluation.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
specifies which Enumerate
RF parameters d values
can be adjusted (You can
in the current select
CCO task. An multiple
RF parameter parameters
for a cell can be ): Cov
N
adjusted only l Pilot erag
e
when this power e/
xt
Adjustable RF parameter is Loa
l Electric - - Y - p
Parameters included both in d
al er
the cell-level bala
downtil io
adjustable RF ncin
t angle d
parameters g
specified in l Mechan
global ical
parameters and downtil
in the adjustable t angle
RF parameters l Azimut
specified for the h
CCO task.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
specifies the
resolution for
grid-level
counters. When
a CCO task is in
progress, data is
displayed in
grids in many
procedures. Cov
Value N
This parameter erag
range: 5 to e
is used in the e/
200 xt
Grid following Loa
- - Y - p
Resolution procedures: Default d
er
l During MDT value: 20 bala
io
feature Unit: meter ncin
d
database g
generation
l After MR
locating
l During
feature
database
import
l During ACP
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
specifies the
relative weight
among ARFCN
layers.
Cov
The SONMaster N
Value erag
automatically e
range: 1 to e/
identifies the xt
Network Layer 100 Loa
DL ARFCNs of - Y - p
Weight d
cells involved in Default er
bala
each CCO task. value: 50 io
ncin
You have to d
g
enter the relative
weight of each
ARFCN
involved in
optimization.
Value
range: 0 to
N
100
e
RRC Setup Value type: Cov xt
Success Rate floating erag - Y - p
Threshold point e er
Default These io
These value: 99 parameters are d
parameters are Unit: % used to identify
used to identify problematic
cells with Value cells and are
abnormal KPIs. range: 0 to classified into N
100 the same type. e
RF-Caused Value type: Cov xt
RRC Setup floating erag - Y - p
Failures ratio point e er
threshold
Default io
value: 70 d
Unit: %
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Value
range: 0 to
N
100
e
E-RAB Setup Value type: Cov xt
Success Rate floating erag - Y - p
Threshold point e er
Default io
value: 99 d
Unit: %
Value
range: 0 to
N
100
e
RF-Caused E- Value type: Cov xt
RAB Setup floating erag - Y - p
Failures ratio point e er
threshold
Default io
value: 70 d
Unit: %
Value
range: 0 to
N
100
e
Value type: Cov xt
Service Drop floating erag - Y - p
Rate Threshold point e er
Default io
value: 1 d
Unit: %
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Value
range: 0 to
N
Proportion 100
e
Threshold of Value type: Cov xt
RF-Caused floating erag - Y - p
Call Drops to point e er
Total Service
Default io
Drops
value: 70 d
Unit: %
Value
range: 0 to
N
100
e
VQI anomaly Value type: Cov xt
count ratio floating erag - Y - p
thresholds point e er
Default io
value: 1 d
Unit: %
This parameter
is used to check
whether a cell is
Value N
overloaded. If
range: 0 to Loa e
the load of a cell
100 d xt
High Load is greater than or
bala - Y - p
Threshold equal to the Default
ncin er
value of High value: 70
g io
Load Unit: % d
Threshold, the
cell is
overloaded.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
is used to check
whether the load
between cells is
balanced. If the
load difference Value N
between one cell range: 0 to Loa e
and one of its 100 d xt
Load Gap
neighboring bala - Y - p
Threshold Default
cells is greater ncin er
value: 30
than or equal to g io
the value of Unit: % d
Load Gap
Threshold, the
load between
the cells is
unbalanced.
These
An MR data
parameters are
record with
used for
weak coverage
identifying Cov
refers to an MR Value N
coverage erag
data record in range: -150 e
Weak problems and e/
which the RSRP to 150 xt
Coverage are classified Loa
of the primary - Y - p
RSRP Default into the same d
serving cell is er
Threshold value: -100 type. You must bala
less than the io
Unit: dBm set these ncin
value of Weak d
parameters only g
Coverage
in coverage
RSRP
optimization
Threshold.
scenarios.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
An MR data Cov
Value N
record with pilot erag
range: -150 e
Pilot Pollution pollution refers e/
to 150 xt
RSCP to an MR data Loa
- Y - p
Difference record that Default d
er
Threshold meets the value: -90 bala
io
following Unit: dBm ncin
d
requirements: 1. g
The RSRP of the
primary serving Cov
Value N
cell is greater erag
range: -10 e
than or equal to e/
Pilot Pollution to 60 xt
the value of Loa
RSCP - Y - p
Pilot Pollution Default d
Threshold er
RSCP value: 5 bala
io
Difference Unit: dB ncin
d
Threshold. 2. g
There are
neighboring
cells for which
the RSRP
difference
between the
primary serving
cell and them is
less than the Cov
N
value of Pilot Value erag
Threshold of e
Pollution range: 0 to e/
Overlapped xt
RSCP 100 Loa
Coverage Cells - Y - p
Threshold, and d
with Pilot Default er
the number of bala
Pollution value: 4 io
such ncin
d
neighboring g
cells is greater
than the value of
Threshold of
Overlapped
Coverage Cells
with Pilot
Pollution.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Cov
Value N
This parameter erag
range: -10 e
Weak is mandatory e/
to 60 xt
Coverage when you set the Loa
- Y - p
RSRP optimization Default d
er
Threshold objective in the value: 3 bala
io
ACP module. Unit: dB ncin
d
g
A cell or grid
with weak
coverage refers
to a cell or grid
in which the Cov
Value N
percentage of erag
range: 0 to e
Weak MR data records e/
100 xt
Coverage MR with weak Loa
- Y - p
Proportion coverage in all Default d
er
Threshold MR data records value: 5 bala
io
is greater than or Unit: % ncin
d
equal to the g
value of Weak
Coverage MR
Proportion
Threshold.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
A cell or grid
with pilot
pollution refers
to a cell or grid
in which the Cov
Value N
percentage of erag
range: 0 to e
MR data records e/
Pilot Pollution 100 xt
with pilot Loa
MR Proportion - Y - p
pollution in all Default d
Threshold er
MR data records value: 5 bala
io
is greater than or Unit: % ncin
d
equal to the g
value of Pilot
Pollution MR
Proportion
Threshold.
A cell or grid
with poor
quality refers to
a cell or grid in
Cov
which the Value N
erag
percentage of range: 0 to e
e/
Poor MR MR data records 100 xt
Loa
proportion with poor - Y - p
Default d
threshold quality in all MR er
value: 5 bala
data records is io
Unit: % ncin
greater than or d
g
equal to the
value of Poor
MR proportion
threshold.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
determines
whether to
consider costs
Cov
during Enumerate N
erag
optimization d values: e
e/
calculation. xt
l Yes Loa
Consider Cost Cost-related Y Y - p
l No d
parameters such er
(default bala
as Max. Cost io
value) ncin
are configurable d
g
only when the
Consider Cost
parameter is set
to TRUE.
Value
range: an Cov
integer N
Cost objective. erag
greater than e
e/
or equal to xt
Loa
Max. Cost - 0 Y Y - p
d
er
Default bala
io
value: 0 ncin
d
Unit: g
integer
Value
range: an Cov
integer N
erag
greater than e
e/
or equal to xt
Loa
Site Visit Cost - 0 Y Y - p
d
er
Default bala
io
value: 0 ncin
d
Unit: g
integer
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Value
range: an Cov
integer N
erag
greater than e
Single-Cell e/
or equal to xt
Power Loa
- 0 Y Y - p
Adjustment d
er
Cost Default bala
io
value: 0 ncin
d
Unit: g
integer
Value
range: an Cov
integer N
erag
Single-Cell greater than e
e/
Electrical or equal to xt
Loa
Downtilt - 0 Y Y - p
d
Adjustment er
Default bala
Cost io
value: 0 ncin
d
Unit: g
integer
Value
range: an Cov
integer N
erag
Single-Cell greater than e
e/
Mechanical or equal to xt
Loa
Downtilt - 0 Y Y - p
d
Adjustment er
Default bala
Cost io
value: 0 ncin
d
Unit: g
integer
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Value
range: an Cov
integer N
erag
greater than e
Single-Cell e/
or equal to xt
Azimuth Loa
- 0 Y Y - p
Adjustment d
er
Cost Default bala
io
value: 0 ncin
d
Unit: g
integer
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
specifies the
relative weight
of each
problematic
area when
multiple These
problematic parameters are
areas exist. The involved when a
SONMaster CCO task is in
generates and progress, and C
displays the Value you do not need ur
relative weights range: 1 to to set them re
Weight of
for the 32767 during policy nt
Problematic - - - -
problematic configuration. p
Areas Default
areas, and After you set er
value: 1 these io
allows you to
reconfigure the parameters d
relative weights. during task
execution, they
The number of take effect in the
problematic current period.
areas varies.
You need to set
this parameter
for each
problematic
area.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
specifies the
weak coverage
weight (relative
to interference
and pilot
pollution) for
each
C
problematic
ur
area when
re
Weak multiple Value
nt
Coverage problematic range: 0 to - - - -
p
Weight areas exist. The 100
er
SONMaster
io
generates and
d
displays the
weak coverage
weights for the
problematic
areas, and
allows you to
reconfigure the
weights.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
This parameter
specifies the
pilot pollution
weight (relative
to interference
and weak
coverage) for
each
C
problematic
ur
area when
re
multiple Value
Pilot Pollution nt
problematic range: 0 to - - - -
Weight p
areas exist. The 100
er
SONMaster
io
generates and
d
displays the
pilot pollution
weights for the
problematic
areas, and
allows you to
reconfigure the
weights.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Each cell is
marked the
No. of the
problemati
The SONMaster c area that
C
automatically the cell
ur
generates and belongs to.
re
displays the The
Adjustable Cell nt
value of this antenna - - - -
Area p
parameter, and longitude
er
allows you to and latitude
io
reconfigure the of the cell
d
value. are within
the
specified
adjustable
cell area.
Adjustmen
t range
Default
value
range: -10
Adjustable to 30;
These C
Mechanical
parameters Unit: 1 ur
Downtilt:
specify degree. re
Current Value,
information nt
Lock Switch, Adjustmen - - - -
about p
Min. Value, t step
mechanical er
Max. Value, Value
downtilt angle io
Adjustment range: 0 to
adjustment. d
Step 10;
Unit: 1
degree;
Default
value: 1.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Adjustmen
t range
Default
value
range: -100
Adjustable to 300; C
Electrical These
Unit: 0.1 ur
Downtilt: parameters
degree. re
Current Value, specify
nt
Lock Switch, information Adjustmen - - - -
p
Min. Value, about electrical t step
er
Max. Value, downtilt angle Value io
Adjustment adjustment. range: 0 to d
Step 100;
Unit: 0.1
degree;
Default
value: 10.
Adjustmen
t range
Default
value
range:
-32767 to
Adjustable 32767; C
Azimuth: These ur
Current Value, parameters Unit: 1 re
Lock Switch, specify degree. nt
- - - -
Min. Value, information Adjustmen p
Max. Value, about azimuth t step er
Adjustment adjustment. Value io
Step range: 0 to d
45;
Unit: 1
degree;
Default
value: 5.
E
M
A ff
a
Opt d e
n R
imi v ct
d i
zati a iv
Name Meaning Value Description a s
on n e
t k
Typ c M
o y
e e o
r
d d
y
e
Adjustmen
t range
Default
value
range: -600
Adjustable to 500; C
These
Pilot Power: ur
parameters Unit: dBm.
Current Value, re
specify
Lock Switch, Adjustmen nt
information - - - -
Min. Value, t step p
about pilot
Max. Value, Value er
power
Adjustment range: 0 to io
adjustment.
Step 100; d
Unit: 0.1
dB;
Default
value: 10.
Service This parameter uniquely The value You need to set this
name identifies a task. is a parameter when creating an
character optimization task. The value
string. cannot be changed in
subsequent operations.
Service This parameter identifies the l LTE You need to set this
type type of an SON feature. CCO- parameter when creating an
RRM optimization task. The value
Based cannot be changed in
l LTE subsequent operations.
CCO- You can select only one
RF option.
Based
Stop time This parameter specifies the time - This parameter is valid when
when an optimization task will Start Mode is set to
stop after Stop Mode is set to Schedule.
Schedule.
Rollback This parameter specifies the time Format: This parameter is dedicated
time when optimization advice is HH:MM:S to CCO tasks.
rolled back when Advice S
Rollback is set to Schedule. Default
value:
03:00:00
6.3.3 Process
Figure 6-1 shows the process of LTE CCO. Table 6-8 describes the process.
Procedure Description
Log in to the For detailed operations, see Logging In to the SONMaster in Getting
SONMaster Started.
Procedure Description
(Optional) For detailed operations, see (Optional) Connecting to the OSS in Getting
Connect to the Started.
OSS
Prepare basic For detailed operations, see Preparing Basic Data in Getting Started.
data.
(Optional) Set For detailed operations, see (Optional) Setting Parameters for LTE CCO
parameters for under the LTE CCO node in CCO Management User Guide.
LTE CCO
Create and start For detailed operations, see Creating and Starting an LTE CCO Task under
an LTE CCO the LTE CCO node in CCO Management User Guide.
task
Execute an LTE For detailed operations, see Executing an LTE CCO Task under the LTE
CCO task CCO node in CCO Management User Guide.
(Optional) For detailed operations, see (Optional) Checking the Information About
Check the Exceptions During LTE CCO Optimization under the LTE CCO node in
information CCO Management User Guide.
about
exceptions
during LTE
CCO
optimization
Method 1 Check the task running status on the See Window for CCO Task
task management GUI of the Management in Introduction to
SONMaster. the Main Window.
Method 2 Check the generated logs after the See the following section in
feature is activated. SONMaster System Management
User Guide : Log Management >
Querying SON Logs.
Method 3 Check the identified problematic cells See Wizards for Optimization
on the problematic area construction Tasks in Introduction to the Main
GUI. Window.
Method 4 Check the CCO optimization advice on See the following section in CCO
the optimization advice management Management User Guide: LTE
GUI. You are advised to do so after a CCO > Executing a UMTS CCO
feature running period. Task - RF Based (Huawei).
6.4 Monitoring
When coverage problems exist on the network, activating LTE FDD DL Coverage Optimization
RF Based will reduce the ratios of MRs with weak coverage, MRs with poor quality, and MRs
with pilot pollution, and improve CombKPI.RF if network conditions do not change. You can
evaluate the feature performance by monitoring the following counters:
l Coverage Map before and after optimization: signal level and quality distribution based
on all grid MRs. Figure 6-2 and Figure 6-3 show the examples.
l Signal level and quality CDF curves before and after optimization: each of which includes
the MR ratio CDF curve and the grid ratio CDF curve. Figure 6-4 shows the effect
comparison before and after optimization.
Figure 6-4 Effect comparison of the signal level or quality CDF before and after
optimization
l Statistics counters for each problematic area before and after optimization
– Weak coverage grid proportion before and after optimization
– Poor quality grid proportion before and after optimization
– Pilot pollution grid proportion before and after optimization
– Weak coverage MR proportion before and after optimization
– Poor quality MR proportion before and after optimization
– Pilot pollution MR proportion before and after optimization
– CombKPI.RF before and after optimization
NOTE
l CombKPI.RF represents the effect of the RF-related exceptions of all cells in the
problematic area. Such exceptions include RF-caused RRC setup failures, E-RAB setup
failures, and service drops. Table 8-1 describes counter definitions.
l The optimization should not be performed before, after, or during holidays or major events
because they will cause KPI fluctuation.
If KPIs increase after the optimization advice is delivered and executed, check whether RF-
caused KPI increase is caused by the optimization. If so, use the optimization advice rollback
function to restore the previous network parameters.
This parameter specifies the threshold for the RRC setup success
rate. If the RRC setup success rate in a cell is smaller than or
equal to the value of this parameter, the SONMaster may identify
this cell as a cell with coverage problems.
RRC Setup Success Rate l A larger value of this parameter indicates that more coverage-
Threshold caused problematic areas may be identified based on the RRC
setup success rate.
l A smaller value of this parameter indicates that less
coverage-caused problematic areas may be identified based
on the RRC setup success rate.
This parameter specifies the threshold for the ratio of the number
of RF-caused RRC setup failures to the total number of RRC
setup failures. If the ratio in a cell is larger than the value of this
parameter, the SONMaster may identify this cell as a cell with
coverage problems.
l A larger value of this parameter indicates that less coverage-
RF-Caused RRC Setup
caused problematic areas may be identified based on the ratio
Failures ratio threshold
of the number of RF-caused RRC setup failures to the total
number of RRC setup failures.
l A smaller value of this parameter indicates that more
coverage-caused problematic areas may be identified based
on the ratio of the number of RF-caused RRC setup failures
to the total number of RRC setup failures.
E-RAB Setup Success This parameter specifies the threshold for the E-RAB setup
Rate Threshold success rate. If the E-RAB setup success rate in a cell is smaller
than or equal to the value of this parameter, the SONMaster may
identify this cell as a cell with coverage problems.
l A larger value of this parameter indicates that more coverage-
caused problematic areas may be identified based on the E-
RAB setup success rate.
l A smaller value of this parameter indicates that less
coverage-caused problematic areas may be identified based
on the E-RAB setup success rate.
RF-Caused E-RAB Setup This parameter specifies the threshold for the ratio of the number
Failures ratio threshold of RF-caused E-RAB setup failures to the total number of E-
RAB setup failures. If the ratio in a cell is larger than the value
of this parameter, the SONMaster may identify this cell as a cell
with coverage problems.
l A larger value of this parameter indicates that less coverage-
caused problematic areas may be identified based on the ratio
of the number of RF-caused E-RAB setup failures to the total
number of E-RAB setup failures.
l A smaller value of this parameter indicates that more
coverage-caused problematic areas may be identified based
on the ratio of the number of RF-caused E-RAB setup failures
to the total number of E-RAB setup failures.
Call Drop rate threshold This parameter specifies the threshold for the E-RAB service
drop rate. If the E-RAB service drop rate in a cell is smaller than
or equal to the value of this parameter, the SONMaster may
identify this cell as a cell with coverage problems.
l A larger value of this parameter indicates that less coverage-
caused problematic areas may be identified based on the E-
RAB service drop rate.
l A smaller value of this parameter indicates that more
coverage-caused problematic areas may be identified based
on the E-RAB service drop rate.
Proportion Threshold of This parameter specifies the threshold for the ratio of the number
RF-Caused Call Drops to of RF-caused service drops to the total number of service drops.
Total Service Drops If the ratio in a cell is larger than the value of this parameter, the
SONMaster may identify this cell as a cell with coverage
problems.
l A larger value of this parameter indicates that less coverage-
caused problematic areas may be identified based on the ratio
of the number of RF-caused service drops to the total number
of service drops.
l A smaller value of this parameter indicates that more
coverage-caused problematic areas may be identified based
on the ratio of the number of RF-caused service drops to the
total number of service drops.
VQI anomaly count ratio This parameter specifies the threshold for the rate of
thresholds conversations with abnormal VQIs. If the ratio in a cell is larger
than the value of this parameter, the SONMaster may identify
this cell as a cell with coverage problems.
l A larger value of this parameter indicates that less coverage-
caused problematic areas may be identified based on the rate
of conversations with abnormal VQIs.
l A smaller value of this parameter indicates that more
coverage-caused problematic areas may be identified based
on the rate of conversations with abnormal VQIs.
Weak Coverage RSRP This parameter specifies the weak coverage RSRP threshold and
Threshold is used to identify weak coverage problems.
l A larger value of this parameter indicates that more weak
coverage problems may be identified based on the RSRP.
l A smaller value of this parameter indicates that less weak
coverage problems may be identified based on the RSRP.
Pilot Pollution RSCP This parameter specifies the pilot pollution RSRP threshold and
Difference Threshold is used to identify pilot pollution problems.
l A larger value of this parameter indicates that less pilot
pollution problems may be identified based on the RSRP.
l A smaller value of this parameter indicates that more pilot
pollution problems may be identified based on the RSRP.
Pilot Pollution Ec/No This parameter specifies the pilot pollution RSRP difference
Threshold threshold and is used to identify pilot pollution problems.
l A larger value of this parameter indicates that more pilot
pollution problems may be identified based on the RSRP
difference.
l A smaller value of this parameter indicates that less pilot
pollution problems may be identified based on the RSRP
difference.
Threshold of Overlapped This parameter specifies the threshold for the number of cells
Coverage Cells with Pilot with pilot pollution problems and is used to identify pilot
Pollution pollution problems.
l A larger value of this parameter indicates that less pilot
pollution problems may be identified based on the RSRP.
l A smaller value of this parameter indicates that more pilot
pollution problems may be identified based on the RSRP.
Weak Coverage RSRP This parameter specifies the poor PS SINR threshold during
Threshold ACP and is used to identify poor RS SINR problems.
l A larger value of this parameter indicates that more
interference problems may be identified based on the RS
SINR.
l A smaller value of this parameter indicates that less
interference problems may be identified based on the RS
SINR.
Weak Coverage RSRQ This parameter specifies the poor RSRQ threshold and is used
Threshold to identify MRs with poor quality.
l A larger value of this parameter indicates that more poor
quality problems may be identified based on the RSRQ.
l A smaller value of this parameter indicates that less poor
quality problems may be identified based on the RSRQ.
Weak Coverage MR This parameter specifies the threshold for the percentage of MRs
Proportion Threshold with weak coverage and is used to identify weak coverage
problems and check whether the optimization advice is effective.
l A larger value of this parameter indicates a lower probability
that weak coverage problems are identified and a higher
probability that the optimization advice is effective.
l A smaller value of this parameter indicates a higher
probability that weak coverage problems are identified and a
lower probability that the optimization advice is effective.
Pilot Pollution MR This parameter specifies the threshold for the percentage of MRs
Proportion Threshold with pilot pollution and is used to identify pilot pollution
problems and check whether the optimization advice is effective.
l A larger value of this parameter indicates a lower probability
that pilot pollution problems are identified and a higher
probability that the optimization advice is effective.
l A smaller value of this parameter indicates a higher
probability that pilot pollution problems are identified and a
lower probability that the optimization advice is effective.
Poor Quality MR This parameter specifies the threshold for the percentage of MRs
Proportion Threshold with poor quality and is used to identify poor quality problems
and check whether the optimization advice is effective.
l A larger value of this parameter indicates a lower probability
that poor quality problems are identified and a higher
probability that the optimization advice is effective.
l A smaller value of this parameter indicates a higher
probability that poor quality problems are identified and a
lower probability that the optimization advice is effective.
RF integrated KPI This parameter specifies the threshold for an integrated RF-
threshold caused KPI and is used to identify problems related to the
integrated RF-caused KPI.
l A larger value of this parameter indicates a higher probability
that the optimization advice is effective.
l A smaller value of this parameter indicates a lower
probability that the optimization advice is effective.
7 Feature Specifications
10 2000 30 90 3 Last
optimized
NOTE
For historical optimization view specifications, both the settings in Historical Optimization View
Specification - Historical Optimization Storage Period and Historical Optimization View
Specification - Historical Optimization Storage Duration (Day) must be met.
8 References
Table 8-1 describes evaluation granularities, evaluation counters, and counter generation rules
related to optimization effect evaluation of LTE Coverage Optimization RF Based.
RF-Caused RRC
L.RRC.SetupFail.NoReply (1526727084) /
Setup Failure Rate
L.RRC.ConnReq.Att(1526726658)
(%)
RF-Caused E-RAB
L.E-RAB.FailEst.NoReply(1526726717) / L.E-
Setup Failure Rate
RAB.AttEst (1526727545)
(%)
L.E-RAB.AbnormRel.Radio(1526728282) / [L.E-
RF-Caused Service
RAB.AbnormRel(1526727546) + L.E-RAB.NormRel
Drop Rate(%)
(1526727547)]
[L.Voice.VQI.UL.Poor.Times(1526728414) +
Cell L.Voice.VQI.UL.Bad.Times(1526728415) +
L.Voice.VQI.DL.Poor.Times(1526728419) +
L.Voice.VQI.DL.Bad.Times(1526728420)] /
[ L.Voice.VQI.UL.Excellent.Times (1526728411) +
L.Voice.VQI.UL.Good.Times(1526728412) +
Proportion of VQI
L.Voice.VQI.UL.Accept.Times(1526728413) +
Anomaly Times
L.Voice.VQI.UL.Poor.Times(1526728414) +
(%)
L.Voice.VQI.UL.Bad.Times(1526728415) +
L.Voice.VQI.DL.Excellent.Times(1526728416) +
L.Voice.VQI.DL.Good.Times(1526728417) +
L.Voice.VQI.DL.Accept.Times(1526728418) +
L.Voice.VQI.DL.Poor.Times(1526728419) +
L.Voice.VQI.DL.Bad.Times(1526728420) ]
NOTE
For details about raw counters and counter IDs related to counter generation rules, see 3900 Series Base
Station Performance Counter Reference.