Академический Документы
Профессиональный Документы
Культура Документы
Main benefits
Unique, durable cylinder-operated feed system
optimizes rock drilling and increases rock tool life
2 3
Technical specifications
• Track frames with single grouser pads • Epiroc screw type compressor • Dust collection system
Pipelines, trenching, foundations, slope stabilisation, quarry, road construction, high and cleaning holes, hydraulic track • Radio Remote Control system • Hydraulic cylinder feed with hose
oscillation and two speed traction • Folding boom system guide and double drill rods support
hydroelectric plants. FlexiROC T35 R and T40 R handle all of these applications. • Caterpillar turbo charged diesel engine • Aluminum profile feed beam with movable lower guide/dust hood
or C 7.1 (Tier 4 Final and Add Blue) • Hydraulic rock drill • Carousel type rod handling system
Feed Compressor
+ Optimized performance FlexiROC T35 FlexiROC T40 Atlas Copco OIS K-36-C111GD, FlexiROC T35 FlexiROC T40
screw compressor
FleixROC T35 R and T40 R can be optimized by selecting the right rock drill. Metric US Metric US Metric US Metric US
Feed extension 1 400 mm 55” 1 400 mm 55” Working pressure, max 10.5 bar 152 psi 10.5 bar 152 psi
COP SC19 is a perfect all-round rock drill. COP SC25-HF is extremely productive
Feed rate, max 0.92 m/s 184 ft/min 0.92 m/s 184 ft/min FAD, at normal working pressure 127 l/s 270 cfm 149 l/s 316 cfm
in hole range 64–76 mm (89mm soft/medium rock). COP SC25-HE is
Feed force, max 20 kN 4 400 lbf 20 kN 4 400 lbf
optimized for hole range 76–127 mm.
Tractive pull, max 20 kN 4 400 lbf 20 kN 4 400 lbf
Total length 7 140 mm 281” 7 140 mm 281” Electrical system
Travel length 4 240 mm 167” 4 240 mm 167” Voltage 24 V
Batteries 2 x 12 V, 185 Ah
Alternator 28 V, 95 Ah
Work lights, front 4 x 70 W
Volumes
Work lights, rear 2 x 70 W
Metric US
Work lights, feed 2 x 70 W
A comprehensive
Hydraulic oil tank 250 l 65 gal
Hydraulic system, total 300 l 79 gal
Compressor oil 24 l 6.3 gal
Diesel engine, fuel tank 370 l 98 gal Filter area 11 m2 118 sq.ft
Even the best equipment needs to be
Traction gear 3l 0.8 gal Suction capacity at 500 mm wg 560 l/s 1 200 cfm
serviced regularly to make sure it sustains
Lubrication tank (ECL) 10 l 2.6 gal Suction hose diam 127 mm 5”
peak performance. An Epiroc service
Cleaning air pressure, max 7.5 bar 109 psi
solution offers peace of mind, maximizing
Cleaning air consumption 2–4 l/pulse 0.06–0.12 cu.ft/pulse
availability and performance throughout Number of filter elements 11 pcs
the lifetime of your equipment. We focus
on safety, productivity and reliability.
4 5
Technical specifications Technical specifications
0° 20°
30°
95°
95°
30°
2 900
30°
2 755
5 500 5 000 Feed without toe-hole kit but after Feed with toe-hole kit (optional)
reconnection for horizontal feed
FlexiROC T35 Vertical reach (mm)
Selection of options
Carrier: TDS guide tube guides for drill • Tropical hydraulic oil, VG 68
• Hydraulic support leg rods support: • Biological hydraulic oil, VG 46
• Hydraulic winch with towing eye and • TDS 45 for 45 mm guide tube • Water mist system, 120 l water tank
wire guides, Radio Remote Controlled • TDS 56 for 56 mm guide tube • Water mist system, excluding tank
H1
H2 • Diesel engine preheater • TDS 76 for 76 mm guide tube
• Air flow switch Dust control:
• Electric refuelling pump Hole measuring systems: • Dust pre-separator (standard on
• Service hand lights inside canopy, 2 pcs • Laser receiver upgrading kit FlexiROC T40 R)
L1
L2 • Combined warning sound and • Electronic inclination and hole depth • Rubber disc for DCT
warning light instrument
• ProCom satellite based drill rig • GPS compass for parallel holes Delivered equipment, not mounted:
Transport dimensions
monitoring system (only in combination • Lube oil, lube system and water • Gas charging equipment for rock drill
FlexiROC T35 R FlexiROC T40 R with a written service agreement) mist system • First 50 hours service kit for compressor
Feed dumped 1 Metric US Metric US • Rock drill oil collecting system • Conversion kit R38/T38 (not for
Height (H1) 3 200 mm 126" 3 200 mm 126" Feed: (standard on FlexiROC T40 R) FlexiROC T40 R)
Length (L1) 11 600 mm 457" 11 600 mm 457" • Silence kit • Central lubrication system, type Lincoln • Conversion kit T45
Feed dumped 2
• Toe hole drilling kit • Thread greasing devise ECG (with oil) • Conversion kit T51
• Sleeve retainer for RHS 51: • Thread greasing device, rush type • Spare code key for radio transmitter
Height (H2) 3 500 mm 138" N/A N/A
– Jaw set R32/T38 (with grease)
Length (L2) 11 000 mm 433" N/A N/A
– Jaw set T45/T51 • Artic hydraulic oil, VG 32
6 7
epiroc.com
commitment drives us to keep moving forward.
Performance unites us, innovation inspires us, and