Академический Документы
Профессиональный Документы
Культура Документы
a) Grade designation(fck) 35
b) Type of cement OPC 43 grade conforming to IS 8112
c) maximum nominal size of aggregate 10
d) minimum cement content 450 kg/m^3
e) maximum water-cement ratio 0.42
f) workability mm (slump) 75
g) exposure condition Severe(for reinforced concrete)
h) method of concrete placing normal
i) degree of supervision good
j) type of aggregate crushed angular aggregate
k) maximum cement content 450 kg/m^3
l) chemical admixture type superplasticizer
A-2 TEST DATA FOR MATERIALS
a) cement used OPC 43 grade conforming to IS 8112
b) specific gravity of cement 3.15
c) chemical admixture superplasticizer conforming to IS 9103
d) specific gravity of:
1) coarse aggregate 2.74
2) fine aggregate 2.74
e) water absorption:
1) coarse aggregate 0.5 percent
2) fine aggregate 1.0 percent
f) free(surface) moisture:
1) coarse aggregate nil (absorbed moisture also nil)
2) fine aggregate nil (absorbed moisture also nil)
standard diviation 5
MIX PROPORTIONS
CEMENT 450
WATER 189
FINE AGGREGATE 954
COARSE AGGREGATE 866
WATER-CEMENT RATIO 0.42
IS 456-2000,TABLE 5
MIN CEM MAX W/C MIN GRADE CONC(M)
300 0.55 20
300 0.5 25
320 0.45 30
340 0.45 35
360 0.4 40
IS 10260:2009
NOMINAL SIZE OF MAXIMUN WATER
AGGREGATE(mm) CONTENT(kg)
10 208
20 186
40 165
50 0.01 20 0.62
75 0.03 40 0.71
100 0.06
Adjustments
kg/m3 0.5 0.46 required in
Change in
Volume
of coarse
aggregat
e per
Change in Water unit
condition content volume
For degree of
0.42 workability 186 0.62
For decrease in
Water-Cement
ratio is ( 0.6-
0.4 0.48 0.45)=0.15 0 0.03
X2-X1 -0.1 Total 186 0.65
Y2-Y1 0.02
X-X1 -0.08
Y-Y1 0.016
Y 0.476
0.5 0.46
0.4 0.48
0.5 0.46
0.4 0.48
0.42
WATER CEMENT FA CA
189 450 954 866
1 2.12 1.925
7.1442 17.01 36.0479724071 32.7458680645
3.5721 8.505 18.0239862036 16.3729340322
42.8652 102.06 216.2878344428 196.4752083869
WATER CEMENT FA CA
0.637875 1.51875 3.2185689649 2.92373822
1.913625 4.55625 9.6557068948 8.7712146601