Академический Документы
Профессиональный Документы
Культура Документы
SERVICING NC II
PREPARED BY:
ERVIN
Tutorial
NETWIRING
1. Make straight thru cable 6 pcs 1 meter UTP cable using 12pcs RJ45
2. Make straight thru cable 2 pcs 3 meter UTP cable using 4pcs RJ45
A B
INTERNET
PC 1 PC 2
I O LAN WAN
ACCESS
POINT
PATCH
BOARD
1 2 3 4
1 2 3 4 1 2 3 4
Go to computer workstation
1. Click start
2. Type cmd
3. Type ipconfig
4. Click Google chrome
5. Type the IP address in the Google for example 192.168.100.101
6. Click enter
7. Write admin in the username
8. Write admin in the password
9. Click log in
10. Change the Wireless Network Name (SSID) to your surname
11. Click apply then wait
12. Write admin in the username again
13. Write admin in the username again
14. Click network setting
15. Click LAN/DHCP server
16. Change LAN IP in your desired IP address for example 192.168.50.51
17. Click apply then wait
18. Click internet icon
19. Click open network and sharing center
20. Click change adapter setting
21. Click local area connection
22. Right click disable then enable
23. Go to cmd then type ipconfig for checking
24. Click internet icon
25. Click open network and sharing center
26. Click change adapter setting
27. Click local area connection
28. Right click then click properties
29. Click Internet Protocol Version 4 (TCP/IPv4)
30. Click properties
31. Click use the following IP address
32. Type your desire IP for example 192.168.50.6 for workstation
33. Click subnet mask 255.255.255.0
34. Click default gateway then type 192.168.50.51
35. Click preferred DNS server then type 192.168.50.51
36. Click ok then click close
37. Right click local area connection
38. Click disable and enable
39. Go to cmd and type ipconfig for checking
40. Go to Google chrome then type for example youtube
Go to computer server
1. Click start
2. Type cmd
3. Type ipconfig
4. Click internet icon
5. Click open network and sharing center
6. Click change adapter settings
7. Click local area connection
8. Right click properties
9. Click Internet Protocol Version 4 (TCP/IPv4)
10. Click properties
11. Click use the following IP address
12. Click IP address then type for example 192.168.50.7 for server
13. Click subnet mask 255.255.255.0
14. Click default gateway then type for example 192.168.50.51
15. Click preferred DNS server then type for example 192.168.50.51
16. Click ok then click close
17. Right click local area connection
18. Click disable then enable
19. Go to cmd and type ipconfig for checking
20. Go to internet explorer then type for example youtube
CREATE AN IP ADDRESS IN WORKSTATION TO ACCESS
INTERNET USING ACCESS POINT AND HUB
Go to computer workstation
Go to computer server
1. Click start
2. Type cmd
3. Type ipconfig
4. Click internet icon
5. Click open network and sharing center
6. Click change adapter settings
7. Click local area connection
8. Click disable then enable
9. Click properties
10. Click Internet Protocol Version 4 (TCP/IPv4)
11. Click properties
12. Click obtain an IP address automatically
13. Click obtain DNS server address automatically
14. Click ok
15. Click close
16. Click local area connection
17. Click properties
18. Click Internet Protocol Version 4 (TCP/IPv4)
19. Click properties
20. Click use the following IP adress
21. Click IP address for example 192.168.60.7
22. Click subnet mask 255.255.255.0
23. Click default gateway 192.168.60.61
24. Click preferred DNS server 192.168.60.61
25. Click ok
26. Click close
27. Right click local area connection
28. Click disable then enable
29. Go to cmd
30. Type ipconfig for checking
31. Go to internet explorer browse application
Go to computer server
1. Click start
2. Click dcpromo then wait
3. Click next
4. Click next
5. Click create a new domain in new forest then click next
6. Type your name Ervin.com
7. Click next then wait
8. Click next
9. Click next then wait
10. Click next then wait examining DNS configuration
11. Click yes
12. Click next
13. Type password = P@SSWORD12345
14. Click next
15. Click next then wait for installation
16. Click finish
17. Click restart now
18. Press ctrl+alt+delete to log on
19. Type password
20. Click roles
21. Click add roles
22. Click next
23. Click DHCP server, files services, print and document services, remote
desktop services
24. Click next, next
25. Check remote desktop session host
26. Click install remote desktop
27. Click next, next
28. Click require network level authentication
29. Click next, next, next, next, next, next, next, next, next
30. Click enable DHCPv6 Then click next
31. Click next, next, next, next, next, next, next
32. Click install then wait
33. Click close
34. Click yes then computer will restart
35. Press ctrl+alt+delete
36. Type your username and password = administrator and
P@SSWORD12345
37. Wait then click close
38. Click start
39. Click my computer
40. Format local disk D
41. Create folder sharing
42. Click share with specific people
43. Click find people then add
44. Type AU then click ok then read/write
45. Click everyone then add then read/write
46. Click share then done
47. Click start
48. Click administrative tools
49. Click group policy management
50. Click forest Ervin.com
51. Click domains
52. Click Ervin.com
53. Click link order/then delete
54. Right click Ervin.com then create a GPO in this domain
55. Type Ervin then ok
56. Right click then edit
57. Click user configuration
58. Click policies
59. Click windows settings
60. Click folder redirection
61. Right click documents
62. Click properties
63. Click setting then click basic
64. Paste in the root path
65. Go to settings uncheck grant then check also apply
66. Click apply
67. Click yes
68. Click ok
69. Click start
70. Click administrative tools
71. Click active directory users and computers
72. Click Ervin.com
73. Click domain controllers
74. Click new then user
75. Write your name Ervin
76. Click next
77. Uncheck user must change check password never expires
78. Type P@SSWORD12345
79. Click next
80. Click finish
Go to computer workstation
COC 2
COC 3
COC 4