Академический Документы
Профессиональный Документы
Культура Документы
www.philips.com/welcome
32PFL3605H/12
42PFL3605H/12
47PFL3605H/12
EN User Manual
This information is correct at the time of press. For updated information, see www.philips.com/support.
Downloaded from www.Manualslib.com manuals search engine
6 Install channels
Contents Automatically install channels
27
27
E n g l i sh
Manually install channels 28
Rename channels 29
1 Notice 2 Rearrange channels 29
Test digital reception 29
2 Important 4
7 Connect devices 30
3 Your TV 7 Back connector 30
Side controls and indicators 7 Side connector 32
Remote control 7 Connect a computer 33
Use a Conditional Access Module 34
Use Philips EasyLink 34
4 Use your TV 9 Use a Kensington lock 35
Switch your TV on / off or to standby 9
Switch channels 9
Watch connected devices 10 8 Product information 36
Adjust TV volume 10 Supported display resolutions 36
Use teletext 10 Multimedia 36
Tuner / Reception / Transmission 36
Remote control 36
5 Use more of your TV 11 Power 36
Access TV menus 11 Supported TV mounts 37
Rename devices from the home menu 11 Product specification 37
Remove devices from the home menu 11
Change picture and sound settings 12
Use the universal access menu 15 9 Troubleshooting 38
Use advanced teletext features 15 General TV issues 38
Create and use list of favourite channels 16 TV channel issues 38
Use the Electronic Programme Guide 17 Picture issues 39
Use the TV clock 18 Sound issues 39
Use timers 19 HDMI connection issues 39
Use TV locks 20 Computer connection issues 40
Use subtitles 21 Contact us 40
View photos and play music from a
USB storage device 22 10 Index 41
Listen to digital radio channels 24
Update the TV software 24
Change TV preferences 25
Access decoder channel 26
Start a TV demo 26
Reset the TV to factory settings 26
EN 1
2 EN
E n g l i sh
plug. Should it become necessary to replace HDMI, the HDMI logo and High-Definition
the mains fuse, this must be replaced with a Multimedia Interface are trademarks or
fuse of the same value as indicated on the plug registered trademarks of HDMI Licensing LLC.
(example 10A). All other registered and unregistered
1 Remove fuse cover and fuse. trademarks are the property of their respective
2 The replacement fuse must comply with owners.
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Copyright
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
Note
EN 3
4 EN
E n g l i sh
• Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or Your product is designed and manufactured
antenna cable. with high quality materials and components,
Risk of hearing damage! which can be recycled and reused.
• Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
• If the TV is transported in temperatures When this crossed-out wheeled bin symbol
below 5°C, unpack the TV and wait is attached to a product it means that the
until the TV temperature matches room product is covered by the European Directive
temperature before connecting the TV to 2002/96/EC. Please inform yourself about the
the power outlet. local separate collection system for electrical
and electronic products.
Screen care Please act according to your local rules and
do not dispose of your old products with your
• Avoid stationary images as much as
normal household waste.
possible. Stationary images are images
Correct disposal of your old product helps to
that remain on-screen for extended
prevent potential negative consequences for
periods of time. Examples include:
the environment and human health.
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
• Unplug the TV before cleaning. Your product contains batteries covered by
• Clean the TV and frame with a soft, the European Directive 2006/66/EC, which
damp cloth. Never use substances such as cannot be disposed with normal household
alcohol, chemicals or household cleaners waste.
on the TV. Please inform yourself about the local rules
• Risk of damage to the TV screen! Never on separate collection of batteries because
touch, push, rub or strike the screen with correct disposal helps to prevent negative
any object. consequences for the environmental and
• To avoid deformations and colour fading, human health.
wipe off water drops as soon as possible.
EN 5
6 EN
E n g l i sh
1
Congratulations on your purchase, and
2
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at 22 3
www.philips.com/welcome. 21 4
20 5
6
This section gives you an overview of
19 7
commonly used TV controls and functions.
8
18 9
Side controls and indicators
17 10
11
1
16 12
2
13
4
5 15 14
EN 7
8 EN
E n g l i sh
• Press P +/- on the remote control or
P/CH +/- on the side of the TV.
This section helps you perform basic TV
• Enter a channel number using the
operations.
Numeric buttons.
• Press OK to use the channel grid.
• Press BACK P/P on the remote
Switch your TV on / off or to control to return to the previous channel.
standby
Note
To switch on
• If the standby indicator is off, press
(Power) at the side of the TV.
• If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
• Press (Standby-On) on the remote 1 Press OK.
control. » The channel grid appears.
» The standby indicator switches to red.
2 Press to select and preview a
To switch off channel.
• Press (Power) at the side of the TV.
» The standby indicator switches off. 3 Press OK to watch the selected channel.
Tip
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
EN 9
Note
10 EN
E n g l i sh
your TV After adding a new device to the home menu,
you can rename it to your preference.
Access TV menus 1 Press MENU.
2 Press to select a device to rename.
Menus help you to install channels, change 3 Press OPTIONS.
picture and sound settings and access other » The options menu appears.
features.
1 Press MENU.
4 Press to select [Rename device], then
press OK.
» The menu screen appears.
» A text input box appears.
5 Press to select characters.
Add new device
Setup 6 Press OK to confirm each character.
Watch TV
7 Select [Done], then press OK to finish
renaming devices.
Note
EN 11
12 EN
E n g l i sh
match lighting conditions. Automatically displays the
• [MPEG artifact reduction]: suitable picture format. If
Smoothes out transitions on digital not, widescreen is applied.
pictures. You can switch this feature [Super zoom]:
on or off. (Not for HD and PC
• [Colour enhancement]: Makes mode.) Removes the
colours more vivid and improves black bars on the side of
the details in bright colours. You can 4:3 broadcasts. There is
switch this feature on or off. minimal distortion.
• [PC mode]: Adjusts the picture when a
[4:3]: Shows the classic 4:3
PC is connected to the TV via HDMI or
format.
DVI.
• [Picture format]: Changes the picture
format. [Subtitle zoom]: Displays
• [Picture size]: Adjusts the viewing area. 4:3 pictures over the full
(when set to maximum, you might see area of the screen, with
noise or a rough edge of an image.) sub-titles visible. Part of
• [Horizontal shift]: Adjusts the picture the top of the picture is
horizontally for PC-VGA, DVI, HDMI or clipped off.
YPbPr. [Movie expand 14:9]: (Not
• [Vertical shift]: Adjusts the picture for HD and PC mode.)
vertically for PC-VGA, DVI, HDMI or Scales 4:3 format to 14:9.
YPbPr.
[Movie expand 16:9]:
(Not for HD and PC
Change picture format mode.) Scales 4:3 format
to 16:9.
1 Press FORMAT.
» A picture format bar appears. [Wide screen]: Scales 4:3
format to 16:9.
2 Press to select a picture format.
» The selected picture format is [Unscaled]: For HD
activated. and PC mode only,
3 Press OK to confirm your choice. and in selected models
only. Allows maximum
sharpness. Some
Summary of picture formats distortion may be present
The following picture settings can be due to the broadcaster’s
configured. systems. Set your PC
resolution to wide screen
Note mode for best results.
• Depending on the format of the picture
source, some picture settings are not available.
EN 13
14 EN
E n g l i sh
You can activate the universal access menu Access the teletext options menu
during the first installation. Once enabled, you
can quickly access the visually impaired and Access the teletext features through the
hearing impaired menus when watching TV or teletext options menu.
external devices. 1 Press MHEG/TELETEXT.
» The teletext screen appears.
Tip
2 Press OPTIONS.
• You can also enable the universal access » The teletext options menu appears.
menu by selecting [Setup] > [Installation] >
[Preferences] > [Universal access] > [On]. 3 Press to select one of the following
options.
1 When watching TV, press OPTIONS. • [Reveal]: Hides or reveals hidden
» The TV options menu appears. information on a page, such as
solutions to riddles or puzzles.
2 Select [Universal access], then press OK
• [Cycle subpage]: Cycles through
or to enter.
subpages automatically if subpages
3 Press to select one of the following are available.
options and press OK to enter. • [Language]: Switches to a different
• [Hearing impaired]: Enables or language group to display a language
disables hearing impaired subtitles. correctly when it uses a different
• [Visually impaired]: Selects speaker, character set.
headphone or both for • [Freeze page]: Freezes the current
[Vol.vis.impaired] audio. Select [Off] page.
to disable audio descriptor. (Only • [Dual screen] / [Full Screen]: Enables
applicable to the UK region). and disables dual screen teletext.
• [Vol.vis.impaired]: Adjusts the
volume of visually impaired audio.
4 Press to make a selection, then
press OK to confirm.
Tip 5 Press BACK to exit the teletext
options menu.
• Press the colour buttons on the remote
control to enter the options.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1 Press MHEG/TELETEXT.
» The teletext screen appears.
2 Press P +/- to select a teletext page.
3 Press to enter a subpage.
EN 15
Note
16 EN
E n g l i sh
Tip
• View all channels before adding a channel to a EPG is an on-screen guide available for digital
favourite list. channels. EPG allows you to:
• View a list of digital programmes being
1 When watching TV, press OK. broadcast
» The channel grid appears. • View upcoming programmes
• Group programmes by genre
2 Press to select a channel to add to
• Set reminders when programmes start
a favourite list.
• Set up preferred EPG channels
3 Press OPTIONS.
» The channel options menu appears.
Switch on EPG
4 Select [Mark as favourite], then press
OK. 1 When watching TV, press GUIDE.
» The channel is added to the favourite » The EPG planner screen appears
list. displaying information about the
scheduled programmes.
Note
Note
• All favourite channels are marked by an
asterisk in the channel grid. • EPG data is available only in selected countries
and can take some time to load.
Note
EN 17
Note
18 EN
E n g l i sh
You can set timers to switch the TV to standby
2 Press to select [Setup] >
at a specified time.
[Installation] > [Clock] > [Auto clock
mode]. Tip
3 Press to select [Automatic] or
• Set the TV clock before you use timers.
[Manual].
4 Press OK to confirm.
Note
EN 19
20 EN
E n g l i sh
• You have to enter your code every time you
turn on your TV. programmes according to age. You can set
• Switch the TV off and on again for the change your TV to display only programmes with age
to take effect. ratings higher than your child’s age.
1 Press MENU.
Lock or unlock one or more channels 2 Press to select [Setup] > [Features]
> [Parental rating].
1 When watching TV, press OK to display the » A code setup screen appears.
channel grid.
3 Enter your code using Numeric buttons.
2 Press to select a channel to lock or » The parental rating menu appears.
unlock.
3 Press OPTIONS. 4 Press to select an age rating.
EN 21
Tip
Note
• Press GUIDE to switch between thumbnail
• When you select a subtitle language on and file browsing views.
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
View photos
1 Press MENU.
2 Press to select [Setup] >
1 In the USB browser, press to enter the
[Picture] folder.
[Features] > [Subtitle language].
3 Press OK or to enter the list of
2 Press to select a photo or a photo
album.
available languages.
4 Press to select a subtitle language.
3 Press OK to view a full screen image of
the photo.
5 Press OK to confirm.
Tip
Tip
• When in full screen mode, press to move
• You can also access the [Subtitle language] between photos.
menu while watching TV by pressing
OPTIONS > [Subtitle language].
22 EN
E n g l i sh
displayed, press OK. select [Music] and press to enter.
» A slide show begins from the selected • Press GUIDE to switch between
photo. thumbnail and file browsing views.
2 Press the following buttons to control the 2 Press to select a music track or
slide show: album.
• OK to pause the slide show.
• to go back or move forward to the 3 Press OK to play the selected music.
next image.
Button Function
• BACK to stop the slide show.
OK Pause, resume play or stop
playback.
Change slide show settings / Go to the previous or next
music.
1 When viewing a slide show, press
OPTIONS.
» The slide show options menu appears.
Music settings
2 Press to select one of the following.
• [Start Slideshow] / [Stop Slideshow]: When listening to music, press OPTIONS
Starts or stops a slide show. to access one of the following music settings.
• [Slideshow transitions]: Sets the • [Start playback] / [Stop playback]: Starts
transition from one picture to the or stops the music.
next. • [Repeat] / [Play once]: Repeats a song. /
• [Slideshow frequency]: Sets the Disables repeat play and plays a song or
amount of time that a picture is album once.
shown. • [Shuffle on] / [Shuffle off]: Enables or
• [Rotate image]: Rotates a picture. disables random play of songs.
• [Show info]: Displays the picture • [Show info]: Displays the file name.
name, date, size and next picture in
• [TV speakers]: Sets the TV speakers
the slide show.
on or off. (Only available if EasyLink is
3 Press OK to confirm your setting. switched on.)
• [Sound]: Adjusts the sound setting.
Note
• [Rotate image] and [Show info] appear only View a slideshow with music
when you press OK to pause the slideshow.
You can view a picture slide show with
background music.
1 Select an album of songs.
2 Press OK.
3 Press BACK to return to the USB
content browser.
4 Select an album of pictures.
5 Press OK.
EN 23
Note
24 EN
E n g l i sh
TV automatically receives software Use the preferences menu to customise your
updates. If you receive a message on TV settings.
your screen asking you to update your 1 Press MENU.
software:
2 Select [Setup] > [Installation] >
• Select [Update now] to update the
[Preferences].
software immediately.
• [Location]: Optimises TV settings for
• Select [Remind me later] to exit the
update screen at that time and be your location - home or shop.
reminded later. • [Volume bar]: Displays the volume
• Select [Cancel] to skip the update. bar when you adjust the volume.
• [Channel info.]: Displays information
2 If you select [Cancel], you can manually
about the TV channel every time you
access the OAD update by selecting
[Setup] > [Software update] > [Local switch channels. Select [Full] to view
updates] > [OAD]. channel information or [Off] to turn
off the channel information.
3 Select the available version of OAD and
• [Universal access]: Enables or
press OK.
disables the universal access menu.
4 Follow the on-screen instructions to start • [EasyLink]: Enables one-touch play
the update. and one-touch standby between
EasyLink-compliant devices.
Note
• [Pixel Plus Link]: Overrides the
• The TV restarts after the software update is settings of connected devices and
complete. uses the settings of the TV.
(Only available if EasyLink is switched
on.)
• [Teletext 2.5]: Enables or disables
Teletext 2.5. (For digital TV)
• [E-sticker]: For shop mode only. Sets
the location of the e-sticker.
3 Press to select your preference.
4 Press OK.
5 Press MENU to exit.
EN 25
Note
26 EN
E n g l i sh
and digital TV channels and digital radio
The first time you set up your TV, you are channels.
prompted to select a menu language and to 1 From the channel installation guide
install TV and digital radio channels (if available). screen, select [Full installation].
This chapter provides instructions on how to 2 Press OK to confirm.
re-install and fine tune channels. » The TV starts to search and store all
the available channels.
EN 27
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
2 Press to select [Setup] > [Analogue: manual install].
[Installation] > [Channel installation] » The [Analogue: manual install] menu
> [Analogue: manual install]. appears.
» The [Analogue: manual install] menu
appears. 3 Press to select [Fine-tune], then press
to enter.
3 Press to select [System], then press
4 Press to adjust frequency.
to enter.
4 Press to select your country or
5 Press OK to confirm.
region. 6 Press to select [Store current
channel] to store the channel number.
5 Press OK to confirm.
6 Press to return to [Channel
7 Press to enter [Store current channel],
then press OK.
installation] menu.
8 Press to return to the [Channel
installation] menu.
Step 2 Search and store new TV channels
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: manual install].
» The [Analogue: manual install] menu
appears.
3 Press to select [Search], then press
to enter.
4 Press to manually enter the three-
digit frequency.
5 Press OK to begin search.
» If a channel is unavailable at the
selected frequency, press OK to search
for the next available channel.
6 Press BACK when the new channel is
found.
28 EN
E n g l i sh
You can check the quality and signal strength of digital
You can rename channels. The name appears
channels. This allows you to reposition and test your
when you select the channel.
antenna or satellite dish.
1 When watching TV, press OK to display
1 Press MENU.
the channel grid.
2 Press to select [Setup] >
2 Select the channel to rename.
[Installation] > [Channel installation] >
3 Press OPTIONS. [Manual channel search].
» The channel options menu appears.
3 Press to enter the menu.
4 Press to select [Rename channel], 4 Press to enter the frequency of
then press OK. the channel you want to test.
» A text input box appears.
5 Press OK to confirm the frequency, then
5 Press to select characters. press OK again to confirm [Search].
6 Press OK to confirm each character. 6 When complete, select [Store] to store
7 Select [Done], then press OK to finish the frequency.
renaming channels.
Note
Tip
• If the signal quality and strength is poor,
• Press [Aa] to change an uppercase letter to a reposition the aerial or satellite dish and retest.
lowercase letter and vice versa. • If you still have problems with the reception
of your digital broadcast, contact a specialised
installer.
Rearrange channels
After you install channels, you can rearrange the
order in which they appear.
1 When watching TV, press OK to display the
channel grid.
2 Press OPTIONS.
» The channel options menu appears.
3 Press to select [Reorder], then press OK.
4 Select the channel to rearrange, then press
OK.
» The selected channel is highlighted.
5 Press to move the highlighted channel
to the desired location, then press OK.
6 Press OPTIONS.
» [Done reordering] appears on the screen.
7 Press OK to confirm.
8 Press BACK to exit the channel grid.
EN 29
Note
Back connector
b EXT 1 and EXT 2 (CVBS and RGB)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
c SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
SPDIF OUT
30 EN
E n g l i sh
analogue or digital devices such as DVD
e PC IN (VGA and AUDIO IN)
players or game consoles.
Audio and video input from a computer.
VGA
VGA AUDIO IN
LEFT/RIGHT
VGA/DVI
f HDMI 1
Digital audio and video input from high-
definition digital devices such as Blu-ray
players.
EN 31
c USB
Data input from USB storage devices.
d HDMI
a AUDIO L/R
Digital audio and video input from high-
Audio input from analogue devices
definition digital devices such as Blu-ray
connected to VIDEO.
players.
32 EN
E n g l i sh
earphones.
AUDIO IN
LEFT/RIGHT
f COMMON INTERFACE VGA/DVI
DVI
Note
VGA
VGA
EN 33
Caution
Use Philips EasyLink
• Be sure to follow the instructions described Your TV supports Philips EasyLink, which
below. Wrong insertion of a CAM may uses the HDMI CEC (Consumer Electronics
damage both the CAM and your TV.
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
1 Switch off the TV and disconnect it from
can be controlled by a single remote control.
the power outlet.
2 Following the directions printed on the Note
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of • The EasyLink-compliant device must be
switched on and selected as the source.
the TV. • Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
34 EN
E n g l i sh
When you connect your TV to devices that home theater, the TV speakers are automatically
support one-touch play, you can control your muted.
TV and the devices with one remote control. 1 Enable one-touch play and one-touch
One-touch standby standby between your Easylink compliant
When you connect your TV to devices that devices by following the instructions
support standby, you can use your TV remote in the previous section (see ‘Enable or
control to put your TV and all connected disable EasyLink’ on page 35).
HDMI devices in standby mode. 2 Press MENU.
System audio control
When you connect your TV to HDMI
3 Press to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
CEC compliant devices, your TV can
» The TV speakers are turned off
switch automatically to play audio from the
automatically when content from an
connected device.
Easylink compliant system is detected.
To use one-touch audio, you must map the
audio input from the connected device to 4 Press to select [Setup] > [Sound]
your TV. > [TV speakers] > [On] to disable
You can use the remote control from the system audio control and enable the TV
connected device to adjust the volume. speakers.
Note
Enable or disable EasyLink
• To mute the TV speakers, select [TV
speakers] > [Off].
Note
Supported display resolutions • Multimedia file names must not exceed 128
characters.
Computer formats
• Resolution - refresh rate:
• 640 x 480 - 60Hz
• 800 x 600 - 60Hz
Tuner / Reception /
• 1024 x 768 - 60Hz Transmission
• 1280 x 720 -60Hz
• 1280 x 768 -60Hz • Aerial input: 75 ohm coaxial (IEC75)
• 1280 x 1024 - 60 Hz • DVB: DVB Terrestrial, DVB-T MPEG4
• 1360 x 768 - 60Hz • TV system: DVB COFDM 2K/8K; PAL I,
• 1440 x 900 - 60Hz B/G, D/K; SECAM B/G, D/K, L/L’
(For Full HD only) • Video playback: NTSC, SECAM, PAL
• 1680 x 1050 - 60Hz • Tuner Bands: Hyperband, S-channel, UHF,
(For Full HD only) VHF
Video formats
• Resolution - refresh rate:
• 480i - 60Hz Remote control
• 480p - 60Hz
• 576i - 50Hz • Type: PF01E09B
• 576p - 50Hz • Batteries: 2 x AAA (LR03 type)
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz,
60Hz.
Power
• Mains power: 220-240V, 50Hz
• Standby power: < 0.3 W
• Ambient temperature: 5 to 40 degrees
Celsius
36 EN
E n g l i sh
To mount the TV, purchase a Philips TV mount Design and specifications are subject to change
or a VESA-compatible TV mount. To prevent without notice.
damage to cables and connectors, be sure to
leave a clearance of at least 2.2 inches or 5.5cm
32PFL3605H
from the back of the TV.
• Without TV stand
Warning • Dimension (WxHxD): 795.6
x 508.3 x 93 (mm)
• Follow all instructions provided with the TV • Weight: 8.3 kg
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
• With TV stand
mounting that results in accident, injury or • Dimension (WxHxD): 795.6
damage. x 556.6 x 220.8 (mm)
• Weight: 9.4 kg
42PFL3605H
TV screen Required Required
• Without TV stand
size pitch (mm) mounting bolts
• Dimension (WxHxD): 1018.5
(inches)
x 635.7 x 83 (mm)
32 200 x 200 4 x M6 (≤ 10 mm)
• Weight: 11.5 kg
42 300 x 200 4 x M6 (≤ 10 mm) • With TV stand
47 400 x 300 4 x M8 (≤ 12 mm) • Dimension (WxHxD): 1018.5
x 683 x 235.8 (mm)
• Weight: 12.8 kg
47PFL3605H
• Without TV stand
• Dimension (WxHxD): 1129.8
x 700.7 x 83 (mm)
• Weight: 16.8 kg
• With TV stand
• Dimension (WxHxD): 1129.8
x 746.4 x 270.1 (mm)
• Weight: 19.8 kg
EN 37
38 EN
E n g l i sh
The TV is on, but there is no picture: There is a picture but sound quality is poor:
• Check that the antenna is properly
connected to the TV. Note
• Check that the correct device is selected
as the TV source. • If no audio signal is detected, the TV
automatically switches the audio output off
There is sound but no picture: — this does not indicate malfunction.
• Check that the picture settings are
correctly set. • Check that all cables are properly
There is poor TV reception from an antenna connected.
connection: • Check that the volume is not set to 0.
• Check that the antenna is properly • Check that the sound is not muted.
connected to the TV. There is a picture but the sound quality is
• Loudspeakers, unearthed audio devices, poor:
neon lights, high buildings and other large • Check that the sound settings are
objects can influence reception quality. correctly set.
If possible, try to improve the reception There is a picture but sound comes from one
quality by changing the antenna direction speaker only:
or moving devices away from the TV. • Verify that sound balance is set to the
• If reception on only one channel is poor, centre.
fine tune this channel.
There is poor picture quality from connected
devices:
• Check that the devices are connected HDMI connection issues
properly.
• Check that the picture settings are There are problems with HDMI devices:
correctly set. • Note that HDCP
The TV did not save your picture settings: (High-bandwidth Digital Content
• Check that the TV location is set to the Protection) support can delay the time
home setting. This mode offers you the taken for a TV to display content from a
flexibility to change and save settings. HDMI device.
The picture does not fit the screen; it is too • If the TV does not recognise the HDMI
big or too small: device and no picture is displayed, try
• Try using a different picture format. switching the source from one device to
The picture position is incorrect: another and back again.
• Picture signals from some devices may • If there are intermittent sound
not fit the screen correctly. Check the disruptions, check that output settings
signal output of the device. from the HDMI device are correct.
• If you use an HDMI-to-DVI adapter
or HDMI-to-DVI cable, check that an
additional audio cable is connected to
AUDIO IN
(mini-jack only).
EN 39
Contact us
If you cannot resolve your problem, refer to
the FAQs for this product at
www.philips.com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in the Addendum.
Warning
• Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
40 EN
E n g l i sh
clock
display 18
A set 18
analogue common interface 34
fine-tune 28 computer
antenna 30 connect 40, 33
display resolution 36
Conditional Access Module 34
B connect
back connectors 30 antenna 30
batteries 36, 5 PC 40, 33
bracket for wall mount 37 connectors
back connectors 30
HDMI 39, 30
C overview 30
CAM 34
side connectors 32
care 5
USB 22
channel decoder 26
content ratings 21
channel grid 9
country 27
channels
favourites list 16
fine-tune 28 D
grid 9 daylight saving 19
install decoder 26
automatic 27 default settings 26
manual 28 demo 26
list 16 devices 10
lock 20 devices
rename 29 add to home menu 11
reorder / rearrange 29 connect 30
switch 9 remove 11
test reception (digital channels) 29 rename 11
troubleshooting 38 watch 10
tune 28 digital channel
update 17 subtitles 22
child lock test reception 29
lock channels 20 digital radio 24, 27
lock connected devices 20
EN 41
O
H OAD 24
HDMI 39, 31, 29 on timer 19, 19
hearing impaired 15 one-touch play 34
home mode 24 one-touch standby 34
I P
install channels parental rating 20
automatic 26
manual 27
K
Kensington lock 35
42 EN
E n g l i sh
resolution 36 version 24
picture format sound settings 14
change 13 specifications 36
troubleshooting 38 standby 9
picture settings 12 subpages in teletext 15
PIN code 20 subtitles
pixel plus link 24 language 21
power 36 on analogue channel 21
power consumption 36, 6 on digital channel 21
preferences 24 switch
product specifications 36 channels 9
on and off 9
source 10
R
radio 23
rearrange channels 28 T
reception 28, 38 Table of Pages 16
recycle 5 technical specifications 36
register product 7 teletext
remote control features 15
batteries 36, 5 menu 15
overview 7 subpages 15
technical specifications 36 Table of Pages 16
rename channels 28 Teletext 2.5 16
reorder channels 28 use 10
resolution 36 time zone 18
restore default 25 timer
on timer 19, 19
sleep timer 19
S standby 19
safety 4 transmission 36, 38
screen care 5 transporting 4
settings troubleshooting 38
picture 12 TV lock
sound 14, 12 lock channels 20
settings assistant 12 lock connected devices 20
shop mode 24 PIN code 20
side connectors 31 ratings lock 20
slideshow TV overview 7
view 22
with music 23
smart card 33 U
smart picture 12 universal access menu 15
smart settings 12, 14 USB
smart sound 14 disconnect USB 23
software listen to music 23
update software 24
EN 43
V
video format
technical specifications 36
volume
adjust 10
automatic levelling 14
delta 14
mute 10, 34
W
wall mount 4, 37
44 EN