Академический Документы
Профессиональный Документы
Культура Документы
SERIES 591/595
Precision Floodlighting
™
INFRANOR SERIES 591/595
The Infranor Series 591/595 luminaire is a work horse for applications where an ordinary floodlight cannot
provide enough illumination. With over (30) distributions to choose from, including a 1,234,000 CD (6° x 5°)
spot, the 591/595 is perfect for those difficult applications. Such applications include bridges, high rises,
steeples and water towers, just to name a few.
SERIES 591/595 FEATURES & BENEFITS (595 shown below)
1000MH BT56 Axial SP1 6.0 x 5.0 18.0 x 16.0 2x1 1,254,000
Horizontal SP2 4.0 x 19.0 9.0 x 27.0 0x2 1,146,000
Horizontal RN1 7.0 x 28.0 13.0 x 38.0 1x3 467,000
Horizontal RN2 5.9 x 41.0 12.5 x 63.1 1x4 379,400
Horizontal RN3 5.9 x 58.0 13.2 x 85.0 1x5 236,900
Vertical RM1 25.1 x 20.0 42.0 x 37.0 3x3 222,150
Vertical RM2 21.8 x 40.0 42.0 x 75.0 3x5 153,000
Vertical RM3 24.5 x 54.3 42.0 x 79.0 3x5 114,500
Vertical RM4 25.5 x 60.8 52.0 x 109.0 4x6 98,200
Vertical RW1 50.0 x 78.0 114.0 x 130.0 6x6 48,431
Notes: Optics can be rotated 90 degrees (minus the SP1), denoted by an 'R' (eg. 'RN1R').
By rotating the optics 90 degrees, lamp orientation rotates as well.
SP1 reflector cannot be rotated.
Visit our website at www.sternerlighting.com for additional photometric information not listed.
ORDERI NG SEQUENCE
Item Sequence: 1 2 3 4 5 6 7 8 9 10
ORDER
NUMBER:
HOUSING LAMP BEAM VOLTAGE BALLAST MODEL MOUNTING SHIELD GENERAL FINISH
WATTAGE PATTERN STYLE OPTIONS OPTIONS OPTIONS
1. HOU SING
26.56" SQ. 15.28" 26.56" SQ 15.28"
(591) (595)
7.55"
34.22"
14.75" 37.03"
top view 14.31"
8.28"
15.94"
8.00" 4.00" 18.75"
0.44" dia
(4) holes Watertight cord connector
3.75" (2) supplied
0.81" dia 0.44" dia
6.00" (4) holes 21.97"
FIXTURE WEIGHT: 85 LBS. 3.75" 0.81" dia
EPA: 4.60 (fixture only) 6.00"
REMOTE BOX WEIGHT: 50 LBS. EPA: 4.60 FIXTURE WEIGHT: 124 LBS.
7. MoUNTING OPTIONS
(BP) Base Plate (WB) Wall Bracket (SF) Slip Fitter (PD) Base Pad
(Anchors supplied by others) (Anchors supplied by others) 3.44" (Anchors supplied by others)
0.56" 1.81" 1.16" To fit 2.00" (2.38" o.D.) 2.06" 0.56"
(4) 3/8" locking pipe tenon x 4.00" long I.D. (4)
6.00" dia. bolt (min.)
bolt circle 3/4" mounting 6.00" dia.
Can be mounted 3.13" hardware bolt circle
to 2.00" pipe (max) with Removable
6.00" U-bolts (U-bolts pipe plug for 6.00"
5/8" pivot by others). installing
bolt water-tite
3/4" mounting connector
hardware (supplied)
1.50" 2.38" (2.00" sch. 40
3/4" mounting 1.50" 5.63" O.D. steel pipe)
hardware
3.50" Water-tite
3.00" 8.00" connector
Cast ductile iron
1.38" wall bracket and Removable 6.25"
5.50"
horizontal sector 3.50" hole plug for 0.25"
0.38" 0.56" Removable side yoke
Cast ductile iron splice inspection 1/2" set
4.50" (4) screws mounting
surface base cover
All components steel
(N) NOT REQUIRED Cast tenzalloy fitter welded construction
(TS) TOP SHIELD (3S) THREE SIDED (4S) FOUR SIDED (3L) THREE LOUVER (CS) CONCENTRIC
9.00" 9.00" 9.00"
9.00" 9.00"
HOUSING
The luminaire housing shall be cast
aluminum and octagonal in shape with
integral fins for heat dissipation. The luminaire
housing, including the wire entrance, shall be
completely sealed from the outside environment.
The cast aluminum alloy shall contain less than
2/10 of 1% copper for resistance to corrosion including
marine applications.
REFLECTOR
The optical assemblies shall consist of precision die-cut steel formers, with
spring loaded facets of a high purity annodized or patterned specular
aluminum in a choice of forms to provide rectangular narrow, medium or
wide beam patterns. Spot distributions shall be provided by a spun reflector of
high specularity. All reflectors shall include Sterner’s patented lamp stabilizer
to prevent lamp sag and to maximize lamp life and overall efficiency.
YOKE
The luminaire yoke shall be of formed steel 0.31" thick and 2.50" wide. Yoke
shall allow for infinite aiming positions within its aiming range.
ELECTRICAL MODULE
Luminaire shall be cULus listed for use in wet locations and manufactured
from UL recognized electrical components. Electrical assembly is easily
accessible through the ballast box. Each high power factor ballast is capable of
starting temperatures down to -20°F (-28.9°C) and shall be CWA. The socket
shall be a mogul-based porcelain socket with a 4KV rating (5KV for
1000HPS). Fixture shall be equipped with a watertight connector and 3' of
16/3 STO-W cord.
LAMP
Luminaire shall accept the following lamps:
1000MH BT56
1000HPS E25
FINISH
Wooddale Church, Eden Prairie, MN Finished parts are washed in a multistage phosphate processing system and
finished with a polyester urethane powder coat paint. Standard colors are dark
bronze, black, white, and natural aluminum. Contact factory for non-
standard colors.