Академический Документы
Профессиональный Документы
Культура Документы
FD3S.srv.world
[10.0.0.100] - iSCSI Target
RX-7.srv.world
[10.0.0.101] - iSCSI initiator
Install iSCSI Target Service first.
[1] Run Server Manager and Click [Add roles and features].
FD3S.srv.world
[10.0.0.100] - iSCSI Target
RX-7.srv.world
[10.0.0.101] - iSCSI initiator
Configure installed iSCSI Target to provide network storage.
[1] Run Server Manager and Click [File and Storage Services].
[2] Select [iSCSI] on the left pane and click [To create an iSCSI.....] link on the right pane.
Specify the server and volume for setting iSCSI disk. This example shows to configure a
[3]
disk on a custom path (C:\vdisks\).
[4] Specify any name for virtual disk.
[5] Specify the disk size for virtual disk.
[6] Specify the iSCSI Target to assign this virtual disk. If the Target is new, select like follows.
[7] Specify any name for iSCSI Target.
[8] Specify access servers to this iSCSI Target. Click [Add...] button.
Select a method to identify the initiator. This example shows to set initiators by IP address
[9]
like follows.
[10] If it's OK all, click [Next] button.
Configure authentication method between Target and Initiator. This example shows to
[11] configure CHAP. If select CHAP like follwos, set username and password too that are used
for connecting to Target from Initiator.
[12] If it's OK all, click [Create] button.
[13] After finishing creating, click [Close] button.
[14] A new virtual disk has been listed like follows.
iSCSI : Configure iSCSI Initiator1 (Server OS)
FD3S.srv.world
[10.0.0.100] - iSCSI Target
RX-7.srv.world
[10.0.0.101] - iSCSI initiator
[1] Open [Control Panel] - [iSCSI Initiator].
Configure iSCSI Initiator (Windows Client OS). This example is based on Windows 10 Pro.
This example is based on the environment below.
FD3S.srv.world
[10.0.0.100] - iSCSI Target
RX-7.srv.world
[10.0.0.101] - iSCSI initiator
[1] Open [Control Panel] - [Administrative Tools] - [iSCSI Initiator].