Академический Документы
Профессиональный Документы
Культура Документы
Description
ELOTEX® BN SEAL81 is a highly efficient hydrophobizing and water repellent Benefits
additive in powder form (white colour) for cementitious mortars. It improves the water
resistance and durability of cementitious based products. ELOTEX® BN SEAL81 is Water repellent and bulk hydrophobizing
especially recommended where water repellency and bulk hydrophobizing properties additive for cementitious mortars
are expected. Significant reduction in water uptake
ELOTEX® BN SEAL81 functions chemically, protecting both surface and bulk of
Increased durability of cementitous building
cementitious based building mortars and products against water penetration.
materials
ELOTEX® BN SEAL81 has been developed for mortars, jointing compounds and Linear dosage efficiency
building products. ELOTEX® BN SEAL81 is easy to mix during production of Reduced dosage
cementitious based dry mix products. It has a linear dosage, with which the desired Excellent wetting and mixing properties
level of water resistance can be easily adjusted. By mixing with water it does not Excellent workability
delay drymix wetting and does not show any foaming or retardation. There is also no Maintain product performance over time
negative effect on surface hardness, adhesion strength and compressive strength. Long term storage stability
The workability is excellent and fully neutral even at high dosage rates. Formulation reliability – Quality consistency
ELOTEX® BN SEAL81 is fully efficient in alkaline medium, typically a pH of 11 -12. Formulation latitude
No change on physical properties
Preliminary Technical Specifications Free flowing and non dusting powder
Compatible with other additives
Composition Silane-based additive
Appearance Free-flowing white powder
Odour none
Active Material Alkyloxysilane Recommended Applications
Bulk Density 850 – 1050 g/l
Residual Moisture < 2.0% Special additive for
pH-Value 8.0 – 10.0 (as 10% solution in water) cement-based mortar systems
Storage Stability 6 months
ideally suited for plasters, renders, joint
fillers, sealing mortars / slurries
Product Liability
The above information and recommendations
are based upon our experience and are offered
merely for advice. They do not absolve the
consumer from making his own tests. Elotex
AG, their representatives or distributor
organizations have no control over the
conditions under which Elotex powders are
transported, stored, handled or used.
Responsibility for damage arising from the use
of our products cannot be derived from the
recommendations given. The observance of any
intellectual property rights of third parties is the
responsibility of the consumer in each case.
Other Information
Version 1 /11.5.2011
Replaces version from
Date of 1st issue 11.5.2011