Академический Документы
Профессиональный Документы
Культура Документы
Architecture Department
STRENGTH OF MATERIALS
QUESTIONNAIRES:
1.) A HORIZONTAL BAR OF NEGLIGIBLE MASS HINGED AT a AND ASSUMED RIGID IS SUPPORTED BY BRONZE ROD 2M
FORTES, CHYNNA
LONG, 300MM^2 CROSSCAMILLE Rating:AND 200GPA.
P. WITH E=83GPA AND STEEL ROD 1M LONG 600MM^2
SECTIONAL AREA
DISTANCES (0.5M, 1M AND 0.8M)
ARC32 2ND SEM. SY 2018-2019
FIND A) THE STRESS IN STEEL
B) THE STRESS
DATE SUBMITTED: IN BRONZE
April 29, 2019
C) THE DEFORMATION IN BRONZE AND STEEL RODS
SUBMITTED TO: Engr. Mark Jannon O. Mandigma
2.) A horizontal rod 2.5m long and 1200 mm^2 in cross-sectional area is secured between two walls. The rod is stress free
at 20 deg Celsius, use thermal coef= 11.7 x 10^-6 m/m ᴼC and E = 200 Gpa.
a) Find the stress on the horizontal rod when the temperature has dropped to -20 deg Celsius.
b) Find the stress on the horizontal rod when the temperature has dropped to -20 deg Celsius and the walls move
together a distance of 0.50mm?
c) Find the temperature in Celsius which the compressive stress on the horizontal rod is 25MPa.
ARC32 2nd SEM SY. 2018-2019
3.) Steel railroad rails 10 m long are laid with a clearance of 3 mm at a temperature 15ᴼ C. Assume thermal coef= 11.7 x
10^-6 m/m ᴼC and E = 200 Gpa.
Two steel springs arranged in series support a load P. the upper spring has 12 turns of 25 mm diameter wire on a mean
radius of 100mm. the lower spring consists of 10 turns of 20 mm diameter wire on a radius of 75mm. use G=83 GPA.
A. Which of the following most nearly gives the value of P if the maximum shearing stress is 200Mpa?
PAGE NO.
Petalio, Princess A.
B. Which of the following most nearly gives the total elongation of the assembly?