Академический Документы
Профессиональный Документы
Культура Документы
1211.1/14-10 G4
50 and 60 Hz
Etanorm/Etanorm-R
Standardized Pumps
Selection charts
Etanorm
n = 2900 1/min
20 30 40 50 US.gpm 100 200 300 400 500 1000 2000 3000
100
300
32--250 80--250 1) 2)
100--250
4) 50--250 65--250
32--250.1 2) 3) 4) 40--250 1) 2) 1) 2) 1) 2)
1) 2)
200
50 65--200
32--200.1 1) 2) 4)
40--200 50--200 1) 2)
1) 2)
1) 2)
1) 2)
80--200
125--200 1) 2) 4)
40 32--200 1) 2) 100--200 1) 2)
32--160.1 1) 2) 4)
30 100
40--160 1) 2) 50--160
32--160 65--160
1) 2)
1) 2) 1) 2) 80--160 1) 2)
100--160
1) 2) 4)
20
32--125
32--125.1
1) 2) 3) 4)
40--125
50--125 50
65--125
40
10
30
ft
20
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en:
1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
5 2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
H Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en:
[m] 3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno /
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
4 4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
3.5
3
4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 700
2 3 4 5 l/s 10 20 30 40 50 100
KE1211.452/8
Etanorm / Etanorm-R
n = 1450 1/min
10 US.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000
10 IM.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000
100
300
125--500.2R 2) 4)
150--500.1R 200--500R
2) 4)
300--500R 200
2) 4)
250--500R 2) 4)
50 2) 4)
80--400 4) 125--400
2)
40 100--400 150--400
1) 2) 300--400R
200--400R 2) 4)
40--315 2) 4) 100
30 2) 4)
250--400R
80--315 2) 125--315
50--315 2) 4) 65--315 2) 100--315 1) 2) 150--315
2) 4)
1) 2)
1) 2)
20
200--330R 250--330R
32--250.1
4)
32--250 2) 4)
50--250 1) 2) 80--250 300--360R
65--250 100--250 2) 4)
2) 4)
40--250 1) 2) 1) 2) 125--250 2) 4)
1) 2)
1) 2)
50
1) 2)
150--250
1) 4) 40
32--200.1 1) 2) 4) 50--200 65--200
40--200 1) 2) 80--200 1) 2)
1) 2) 1) 2) 1) 2) 125--200 200--260R 300--340R
10 32--200 100--200
1) 2)
2) 4) 2) 4) 30
32--160.1 1) 2) 4) 150--200
250--300R
40--160 1) 2) 50--160 1) 2)
4)
32--160 65--160 200--250R 2) 4)
1) 2)
80--160 20
1) 2)
1) 2)
100--160 2) 4)
5 1) 2) 4)
32--125
32--125.1 1) 2) 3) 4) 40--125
4 50--125
65--125
3 10
H Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en: 5
[m] 1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 4
3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno /
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
ft
1
4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
3
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
0.8
3
2 3 4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 1000 2000
Etanorm
n = 3500 1/min
30 40 50 US.gpm 100 200 300 400 500 1000 2000 3000
50--200 1) 2) 80--200 1) 2)
32--200.1 1) 2) 4) 40--200 1) 2)
65--200 200
32--200 1) 2)
1) 2)
100--200 1) 2)
50 125--200
32--160.1 1) 2) 4) 1) 2) 4)
40--160
40 1) 2) 50--160 1) 2) 65--160
32--160
1) 2)
1) 2) 100--160
80--160 1) 2) 4)
1) 2)
30 100
32--125
1) 2) 3) 4)
32--125.1
40--125
50--125
20
65--125
50
H
[m]
40
10
30
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en:
1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: ft
3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno /
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
6 20
3
6 10 Q[m /h] 20 30 40 50 100 200 300 400 500 800
10 IM.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000 10000
100
300
80--400 4) 125--400 2)
100--400 200--400R 200
300--400R
150--400 2) 4)
2) 4)
50
1) 2)
4)
40--315 250--400R
40 80--315
65--315 2) 125--315 2) 4)
50--315 4) 2) 100--315
1) 2)
1) 2) 150--315
1) 2)
30 250--330R 100
300--360R
32--250.1 4) 32--250 200--330R 2) 4)
2) 4)
40--250 50--250 65--250 80--250 100--250
2) 4)
1) 2) 1) 2)
125--250 2) 4)
1) 2) 1) 2) 1) 2) 1) 2)
20
150--250
32--200.1 1) 2) 4) 65--200 1) 4)
40--200 50--200 125--200
1) 2) 80--200 50
32--200 1) 2) 1) 2) 1) 2)
100--200 300--340R
1) 2) 1) 2) 4)
200--260R
2) 4)
1) 2)
2) 4)
32--160.1 1) 2) 4) 40
150--200
10 40--160 50--160
4)
250--300R
1) 2)
32--160 65--160 30
1) 2) 2) 4)
1) 2) 80--160 200--250R
1) 2)
100--160 2) 4)
1) 2)
1) 2) 4)
32--125.1 1) 2) 3) 4) 32--125
40--125 20
50--125
5 65--125
3 10
2
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en:
1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
H Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 5
[m] 3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno / ft
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
4
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
1
3
2 3 4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 1000 2000 3000
Materials
Etanorm G /
Etanorm-R GC1 Etanorm M Etanorm-RM Etanorm B
Etanorm-RG
Volute casing Grey cast iron JL 1040 1) Grey cast iron JL 1040 1) Tin bronze CC 480 K--GS 3)
Discharge cover Grey cast iron JL 1040 1) Grey cast iron JL 1040 1) Tin bronze CC 480 K-GS 3)
Impeller Grey cast iron JL 10401) 1.4408 Tin bronze CC 480 K--GS 3) Tin bronze CC 480 K-GS 3)
Spaltringe Grey cast iron GG 1.4408 Grey cast iron/Bleibronze GG/G-CuPb10Sn Leaded bronze CC 495 K-GS 3)
Chrome nickel molybdenum steel
Shaft Tempering steel C45 Tempering steel C45
1.4462
Chrome nickel molyb- Chrome nickel molybdenum Chrome nickel molybdenum steel
Shaft sleeve 1.4122 1.4122
denum steel 1.4571 steel 1.4571 1.4571
Shaft protection Chrome nickel molybdenum steel
Chrome nickel molybdenum steel 1.4122 Chrome nickel molybdenum steel 1.4122
sleeve 1.4571
Bearing bracket Grey cast iron JL 1040 1) Grey cast iron JL 1040 1) Grey cast iron JL 1040 1)
Benefits at a Glance
Large material selection
Type: Etanorm-R
Pressure jacket designed for 16
Connecting dimensions
and power ratings to
EN 733 (Etanorm)
Wear rings
service-friendly !
!
Impeller with optimized hy-
draulics, excellent efficiencies
and fine graduation of the QH- Robust deep-groove ball
performance chart bearings, protected against
1211.1/14-10
contamination by v-rings
KSB Aktiengesellschaft
P.O. Box 1361, 91253 Pegnitz · Bahnhofplatz 1, 91257 Pegnitz (Germany)
Tel. +49 (92 41) 71 0 · Fax +49 (92 41) 71 17 91 · www.ksb.com
Selection charts
Etanorm
n = 2900 1/min
20 30 40 50 US.gpm 100 200 300 400 500 1000 2000 3000
100
300
32--250 80--250 1) 2)
100--250
4) 50--250 65--250
32--250.1 2) 3) 4) 40--250 1) 2) 1) 2) 1) 2)
1) 2)
200
50 65--200
32--200.1 1) 2) 4)
40--200 50--200 1) 2)
1) 2)
1) 2)
1) 2)
80--200
125--200 1) 2) 4)
40 32--200 1) 2) 100--200 1) 2)
32--160.1 1) 2) 4)
30 100
40--160 1) 2) 50--160
32--160 65--160
1) 2)
1) 2) 1) 2) 80--160 1) 2)
100--160
1) 2) 4)
20
32--125
32--125.1
1) 2) 3) 4)
40--125
50--125 50
65--125
40
10
30
ft
20
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en:
1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
5 2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
H Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en:
[m] 3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno /
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
4 4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
3.5
3
4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 700
2 3 4 5 l/s 10 20 30 40 50 100
KE1211.452/8
Etanorm / Etanorm-R
n = 1450 1/min
10 US.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000
10 IM.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000
100
300
125--500.2R 2) 4)
150--500.1R 200--500R
2) 4)
300--500R 200
2) 4)
250--500R 2) 4)
50 2) 4)
80--400 4) 125--400
2)
40 100--400 150--400
1) 2) 300--400R
200--400R 2) 4)
40--315 2) 4) 100
30 2) 4)
250--400R
80--315 2) 125--315
50--315 2) 4) 65--315 2) 100--315 1) 2) 150--315
2) 4)
1) 2)
1) 2)
20
200--330R 250--330R
32--250.1
4)
32--250 2) 4)
50--250 1) 2) 80--250 300--360R
65--250 100--250 2) 4)
2) 4)
40--250 1) 2) 1) 2) 125--250 2) 4)
1) 2)
1) 2)
50
1) 2)
150--250
1) 4) 40
32--200.1 1) 2) 4) 50--200 65--200
40--200 1) 2) 80--200 1) 2)
1) 2) 1) 2) 1) 2) 125--200 200--260R 300--340R
10 32--200 100--200
1) 2)
2) 4) 2) 4) 30
32--160.1 1) 2) 4) 150--200
250--300R
40--160 1) 2) 50--160 1) 2)
4)
32--160 65--160 200--250R 2) 4)
1) 2)
80--160 20
1) 2)
1) 2)
100--160 2) 4)
5 1) 2) 4)
32--125
32--125.1 1) 2) 3) 4) 40--125
4 50--125
65--125
3 10
H Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en: 5
[m] 1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 4
3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno /
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
ft
1
4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
3
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
0.8
3
2 3 4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 1000 2000
Etanorm
n = 3500 1/min
30 40 50 US.gpm 100 200 300 400 500 1000 2000 3000
50--200 1) 2) 80--200 1) 2)
32--200.1 1) 2) 4) 40--200 1) 2)
65--200 200
32--200 1) 2)
1) 2)
100--200 1) 2)
50 125--200
32--160.1 1) 2) 4) 1) 2) 4)
40--160
40 1) 2) 50--160 1) 2) 65--160
32--160
1) 2)
1) 2) 100--160
80--160 1) 2) 4)
1) 2)
30 100
32--125
1) 2) 3) 4)
32--125.1
40--125
50--125
20
65--125
50
H
[m]
40
10
30
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en:
1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: ft
3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno /
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
6 20
3
6 10 Q[m /h] 20 30 40 50 100 200 300 400 500 800
10 IM.gpm 20 30 40 50 100 200 300 400 500 1000 2000 3000 4000 5000 10000
100
300
80--400 4) 125--400 2)
100--400 200--400R 200
300--400R
150--400 2) 4)
2) 4)
50
1) 2)
4)
40--315 250--400R
40 80--315
65--315 2) 125--315 2) 4)
50--315 4) 2) 100--315
1) 2)
1) 2) 150--315
1) 2)
30 250--330R 100
300--360R
32--250.1 4) 32--250 200--330R 2) 4)
2) 4)
40--250 50--250 65--250 80--250 100--250
2) 4)
1) 2) 1) 2)
125--250 2) 4)
1) 2) 1) 2) 1) 2) 1) 2)
20
150--250
32--200.1 1) 2) 4) 65--200 1) 4)
40--200 50--200 125--200
1) 2) 80--200 50
32--200 1) 2) 1) 2) 1) 2)
100--200 300--340R
1) 2) 1) 2) 4)
200--260R
2) 4)
1) 2)
2) 4)
32--160.1 1) 2) 4) 40
150--200
10 40--160 50--160
4)
250--300R
1) 2)
32--160 65--160 30
1) 2) 2) 4)
1) 2) 80--160 200--250R
1) 2)
100--160 2) 4)
1) 2)
1) 2) 4)
32--125.1 1) 2) 3) 4) 32--125
40--125 20
50--125
5 65--125
3 10
2
Lieferbar auch in: / Also available in: / Egalement livrable en: / Anche consegnabile in: / Ook leverbaar in: / También disponible en:
1) Zinnbronze / Tin bronze / Bronze ordinaire / Bronzo allo stagno / Tinbrons / Bronce al estaño
2) Sphaeroguss / Spheroidal graphite cast iron / Fonte nodulaire / Ghisa sferoidale / Nodulair gietijzer / Fundiciõn esferoidal
H Nicht lieferbar in: / Not available in: / Néxiste pas en: / No consegnabile in: / Niet leverbaar in: / No disponible en: 5
[m] 3) Chrom--Nickel--Molybdaen--Stahlguss / Cast chrome nickel molybdenum steel / Acier coulé au nickel--chrome--molybdène / Acciaio fuso al cromo--nickel molibdeno / ft
Chroom--nikkel--molybdeen gietstaal / Acero fundido al cromo--niquel molibdeno
4) Ergaenzungsgroessen in EN 733 nicht enthalten / Supplementary sizes not included in EN 733 / Les tailles complémentaires ne sont pas couvertes par EN 733 /
4
Grandezze suppplementari non incluse in EN 733 / Aanuullende grootten niet in EN 733 inbegrepen / Tamaños adicionales no includîdos en EN 733
1
3
2 3 4 5 Q[m /h] 10 20 30 40 50 100 200 300 400 500 1000 2000 3000
Materials
Etanorm G /
Etanorm-R GC1 Etanorm M Etanorm-RM Etanorm B
Etanorm-RG
Volute casing Grey cast iron JL 1040 1) Grey cast iron JL 1040 1) Tin bronze CC 480 K--GS 3)
Discharge cover Grey cast iron JL 1040 1) Grey cast iron JL 1040 1) Tin bronze CC 480 K-GS 3)
Impeller Grey cast iron JL 10401) 1.4408 Tin bronze CC 480 K--GS 3) Tin bronze CC 480 K-GS 3)
Spaltringe Grey cast iron GG 1.4408 Grey cast iron/Bleibronze GG/G-CuPb10Sn Leaded bronze CC 495 K-GS 3)
Chrome nickel molybdenum steel
Shaft Tempering steel C45 Tempering steel C45
1.4462
Chrome nickel molyb- Chrome nickel molybdenum Chrome nickel molybdenum steel
Shaft sleeve 1.4122 1.4122
denum steel 1.4571 steel 1.4571 1.4571
Shaft protection Chrome nickel molybdenum steel
Chrome nickel molybdenum steel 1.4122 Chrome nickel molybdenum steel 1.4122
sleeve 1.4571
Bearing bracket Grey cast iron JL 1040 1) Grey cast iron JL 1040 1) Grey cast iron JL 1040 1)
Benefits at a Glance
Large material selection
Type: Etanorm-R
Pressure jacket designed for 16
Grey cast iron, tin bronze, nodu- bar to guarantee high operating
lar cast iron, cast chrome nickel reliability
molybdenum steel
Connecting dimensions
and power ratings to
EN 733 (Etanorm)
Wear rings
service-friendly !
!
Impeller with optimized hy-
draulics, excellent efficiencies
and fine graduation of the QH- Robust deep-groove ball
performance chart bearings, protected against
contamination by v-rings
4
www.bymisa.mx , Email ventas@bymisa.mx
Etanorm/Etanorm-R
1) to EN 1561 = GJL-250
2) to EN 1563 = GJS-400-18-LT
3) only DN 65-150; DN 32-50 16 bar
5
www.bymisa.mx , Email ventas@bymisa.mx
Etanorm/Etanorm-R
Etanorm
Materials 9) Shaft seal Reference code
Gland Gland Mechani-
Casing/Impeller Mechanical seal
packing packing cal seal
Pure graphite
QiQ1MMGG
U3BEGG 4)
Q1Q1X4GG
U3U3X4GG
Zinnbronze/
Zinnbronze
Tin bronze
BQ1EGG
RT-P
G M S B C 1 3 6 9 10 11 12
Water
Brackish water 3) t ! 25 °C; p !10 bar X X X B1 B10 Cast CrNiMo steel possible
Condensate 2) t !120 °C; p !10 bar X X X G1 G11
Condensate, unconditioned t !120 °C; p !10 bar X X X C1 C11
Cooling water 1)
t ! 60 °C7); p !10 bar X X X G1 G10 open circuit: M1/M10 required
(no anti-freezes)
Cooling water pH value " 7.5
t !120 °C; p !10 bar X X X G1 G11 open circuit: M1/M11 required
(with anti-freeze) 5)
Dam water 1) t ! 40 °C; p ! 10 bar X X X B1 B10 If solids-laden: contact KSB
Drinking water 1) t ! 60 °C7); p !10 bar X X X M1 M10
Contact KSB if VdS guideline
Fire-fighting water 1) t ! 60 °C7); p ! 10 bar X X X M1 M10
has been specified
Purity requirements cannot
Fully desalinated water t !120 °C; p !10 bar X X X C1 C11
be met.
Fully desalinated water
t !120 °C; p !10 bar X X X G1 G11
as boiler feed water 2)
Heating water 2) t ! 120 °C; p !10 bar X X X G1 G11
Heating water 2) t ! 140 °C; p !16 bar X X X G3 G6 If used as circulation pump to
Heating water 2) t ! 110 °C; p ! 10 bar X X X G1 G10 DIN 4752: p max. ! 10 bar
Partly desalinated water 2) t ! 60 °C8); p !10 bar X X X M1 M11
Pure water 6) t ! 60 °C8); p !10 bar X X X G1 G11
Raw water 1) t ! 25 °C; p ! 10 bar X X X B1 B10
Sea water 3) t ! 60 °C7); p ! 10 bar X X X G1 G10 Cast CrNiMo steel possible
t "-30 °C; p !10 bar
Slightly contaminated water 1) X X X G1 G11
t !110 °C
Swimming-pool water Also if DIN 19 643 has been
t ! 60 °C7); p !10 bar X X X G1 G10
(fresh water) 1) specified
Swimming-pool water Cast CrNiMo steel possible if
t ! 60 °C; p ! 10 bar X X X G1 G10
(sea water) 3) t ≤ +25 °C
Coolants, cooling brines
Cooling brine, inorganic, t "-30 °C;
p !10 bar X X X G1 G11
pH value > 7.5; inhibited t ! 25°C
Water with anti-freeze, t "-30°C;
pH value " 7.5; 1), 5) p !10 bar X X X G1 G11
t !110 °C
Oils/Emulsions
Grey cast iron possible, un-
Diesel oil, fuel oil EL t ! 60 °C; p !10 bar X X S10 less specific standards have
to be observed
Drilling/Grinding emulsion t ! 60 °C; p !10 bar X X G1 G9
If specified ”without” internal
Lubricating oil, turbine oil, does primer, contact KSB. Grey
not apply to SDF oils (hardly t ! 80 °C; p !10 bar X X S10 cast iron possible, unless
inflammable) specific standards have to be
observed
Oil-water emulsion t ! 60 °C; p ! 10 bar X X G1 G9
Cleaning agents
Lees for bottle rinsing t ! 90 °C; p !10 bar X X G1 G7 Q1Q1EGG
Brewery applications
If there is a risk of the pump run-
Beer mash t ! 100 °C; p ! 10 bar X X G12 ning g dryy due to excessive emp-p
tying of the tank,
tank an Etanorm with
dual seal in tandem arrangement
Beer wort t ! 100 °C; p ! 10 bar X X G12 must be used.
6
www.bymisa.mx , Email ventas@bymisa.mx
Etanorm/Etanorm-R
Etanorm-R
Shaft seal Reference code
Gland packing
Materials
Application limits Gland Mechanical Mechanical
Medium handled Casing/Impeller Na:
packing seal seal
P1 ≤ 0,5 bar
Nb:
P1 > 0,5 bar
G M S 1 4
Water
Condensate 2) t ! 120 °C; p !10 bar X X G1 Contact KSB
Cooling water 1)
t ! 60 °C; p !10 bar X X X G1 G4
(no anti-freezes)
Cooling water ph-Wert " 7,5 t " -30 °C; p !10 bar
X X X G1 G4
(with anti-freezes) 5) t ! 110 °C
Dam water 1) t ! 60 °C; p !10 bar X X -- M4
Drink water 1) t ! 60 °C; p !10 bar X X X M1 M4
Fire-fighting water 1) t ! 60 °C; p !10 bar X X -- M4
Fully desalinated water
t ! 120 °C; p !10 bar X X X G1 G4
as boiler feed water 2)
Heating water 2) t ! 120 °C; p !10 bar X X X G1 G4
Heating water 2) t ! 140 °C; p !16 bar X X X S1 S4
Heating water 2) t ! 110 °C; p !10 bar X X X G1 G4
Partly desalinated water 2) t ! 120 °C; p !10 bar X X G1 Contact KSB
Pure water 4) t ! 25 °C; p !10 bar X X X G1 G4
Raw water
t ! 60 °C; p !10 bar X X X G1 G4
(industrie applications) 1)
Raw water
t ! 60 °C; p !10 bar X X -- G4
irrigation) 1)
Service water t ! 60 °C; p !10 bar X X -- G4
Slightly contaminated water 1) t ! 60 °C; p !10 bar X X X G1 G4
Swimming-pool water
t ! 60 °C; p !10 bar X X X G1 G4
(fresh water) 1)
Coolants, cooling brines
Cooling brine, inorganic, t " -30 °C; p !10 bar
X X X G1 G4
pH value > 7.5; inhibited t ! 25 °C
Water with anti-freeze, t " -30 °C; p !10 bar
X X X G1 G4
pH value " 7.5; 1) 3) t ! 110 °C
Oils/Emulsions
Diesel oil, fuel oil EL t ! 60 °C; p !10 bar X X S4
Drilling/Grinding emulsion t ! 60 °C; p !10 bar X X G4
Lubricating oil, turbine oil, does not
apply to SDF oils (hardly t ! 80 °C; p !10 bar X X S4
inflammable)
Oil-water emulsion t ! 60 °C; p !10 bar X X X G1 G4
Cleaning agents
Lees for bottle rinsing t ! 90 °C; p !10 bar X X G1
Brewery applications
Beer mash t ! 100 °C; p ! 10 bar X X X G4
Beer wort t ! 100 °C; p ! 10 bar X X G4
1) General criteria for results of water analysis: pH value " 7; chloride (Cl) content !250 mg/kg. chlorine (Cl2) !0.6 mg/kg.
2) Treatment to VdTÜV 1466; additional requirement: O2 ! 0.02 mg/l
3) antifreeze on ethylene glycol basis with inhibitors. Content: >20 % to 50 % (e.g. Antifrogen N)
4) No ultra-pure water! Conductivity at 25 °C: ! 800 mS/cm, neutral with regard to chemical corrosion
5) antifreeze on ethylene glycol basis with inhibitors. Content: >20 % to 50 % (e.g. Antifrogen N)
7
www.bymisa.mx , Email ventas@bymisa.mx