Академический Документы
Профессиональный Документы
Культура Документы
Readme File for AS/400 Client Access Express for Windows Service Packs
5722-XE1 V5R1M0 Cumulative Service Pack Level
-------------
SI10376
-------------
(c) Copyright IBM Corporation 2000. All rights reserved.
========================================================================
NOTICE:
-------
Application of this PTF may disable or render ineffective programs
that use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to
limit interactive capacity to purchased levels. This PTF may be a
prerequisite for future PTFs. By applying this PTF you authorize
and agree to the foregoing.
IMPORTANT:
If you are a Management Central user, it is very important that you
review the information in APAR SE02365 if you have not previously
installed service pack SI01907. There are PTFs for the 5722SS1 product
that must be applied to your Central System and all endpoints in order to
connect to V5R1M0 Management Central servers. If you already addressed this
during the installation of SI01907, this action is not required for the
installation of this service pack.
-----------------
Table of Contents
-----------------
1.0 INSTALLATION INSTRUCTIONS
1.1 INSTALLING FROM AN AS/400 SYSTEM
1.2 INSTALLING FROM A LOCAL OR NETWORK DRIVE
1.3 COMBINING THE SERVICE PACK WITH A CLIENT ACCESS EXPRESS INSTALLATION IMAGE
2.0 RESTRICTIONS
2.1 OPERATIONS NAVIGATOR
2.2 OPERATIONS CONSOLE
3.0 AUTHORIZED PROGRAM ANALYSIS REPORT (APAR) ABSTRACTS
- SERVICE PACK LEVEL = SI10376 (November 2003)
4.0 INSTALL/UNINSTALL CONSIDERATIONS
4.1 REMOVING THE SERVICE PACK
4.2 UNABLE TO INSTALL FROM THE SERVICE SOURCE?
4.3 SERVICE PACK CONTROL
5.0 DATA TRANSFER CONSIDERATIONS
5.1 TRANSFERRING DATA WHEN THE FILE OR DATA CCSID IS 65535
---------------------------------------------------------------------
RMVPTF will restore your AS/400 install image to the prior service
level (or the base release if there was no prior service pack
applied).
Before running this program, copy the service pack install image
files to a local drive on your PC or to any accessible network
drive. Once the install setup program has completed, you can then
remove the install image files from that drive.
1.3 COMBINING THE SERVICE PACK WITH A CLIENT ACCESS EXPRESS INSTALLATION IMAGE
-------------------------------------------------------------------------------
The following method could be used if you downloaded the service pack
image from the iSeries Client Access web page location:
http://www-1.ibm.com/servers/eserver/iseries/clientaccess/casp.htm
With V5R1M0, the Client Access Express service pack PTFs are combined
with the original Client Access Express installation image in
QIBM\ProdData\Ca400\Express\Install\Image
This means that a user can install (or upgrade) Client Access Express
from this combined image directory and get the latest applied service
level automatically in one integrated step - since the original
installation image files have been replaced by updated versions via
the service pack PTF. Selectively installing components from this combined
image directory will also automatically get the latest applied service level
for that component.
If you tailor the Client Access Express install image to another directory
(for instance, on another server), using the Create Tailored Installation Image
(cwbinimg.bat) tool, you can use the PTFFORM.EXE download
in the FTP directory to duplicate the function of applying the AS/400 PTF by
following these steps:
Now you have combined this service pack level with the Client Access Express
installation image, so that users can install Client Access Express plus this
service pack in one integrated step. Note that this procedure also works if
the installation image has already been combined with a prior service pack
level. This procedure will replace the prior service level in the combined
image with this new level.
Alternatively, if you have a full copy of the original Client Access Express
install image in a directory, you can combine PTFFORM.EXE with this full image,
using the same 3-step procedure detailed above. Then you can run
Create Tailored Installation Image (cwbinimg.bat) from this full image
directory,
to create tailored image directories that will automatically have the service
pack
merged in.
2.0 RESTRICTIONS
-----------------
For Windows 95, at least the 'a' level service pack must be
installed. To determine if you are running Windows 95 A or
later, click Start, point to Settings, click Control Panel,
then double-click System. If the version number reported is
4.00.950 A or later, no action is required. Your system already
contains the appropriate fix. If you do need to install the
update, it is available at
http://www.microsoft.com/windows95/downloads/contents/
WURecommended/S_WUServicePacks/W95SvcPack1/Default.asp
ExceptionInInitializerError
NoClassDefFoundError
http://www.microsoft.com/windows95/downloads/
Then take the link for "Windows Socket 2 Update"
---------------------------------
Service Pack Level = SI10376
Build date = November 2003
---------------------------------
APAR = SE11654 CA400EXP - HARD CLOSE OUTPUT INCORRECT IN XDA WINDOWS CLIENT
The output returned when specifying the ODP threshold on a "Hard
Close" operation through the XDA Windows Client is incorrect.
Endian conversion was added to return the proper data when
specifying the ODP threshold on a "Hard Close" operation through
the XDA Windows Client.
CIRCUMVENTION:
If the service is configured to run under the account
of a user who is part of the local Administrators
group, rather than under Local System, it may start.
MAPI
----
No fixes.
CIRCUMVENTION:
If you click on the Forwarding Parameters page you will not lose
the existing data that is displayed there.
APAR = SE10078 OSP-IMPORT OF OVERLAY FAIL USING AFP MANAGER
Customer tries to import an overlay from a PC to the iSeries
using CA Exp AFP Manager. This fails. On the PC they see
msgcpd0104. In the iSeries joblog they see msgCPE3426 & msgCPD3E34.
AFP Manager is incorrectly processing the DATATYPE parameter in
two translated versions. The versions that are affected are
German 2929 and 2939.
APAR = SE10222 OSP FAILURE TO ACCESS THE PM400 TREND ANALYSIS DATA ON THE W
When trying to access the PM400 trend analysis data on the web
via Operations Navigator this fuction is failing when using Netscape 7.
APAR = SE10324 TCPIP CANNOT MAKE CHANGES TO DNS CONFIG USING OPSNAV
Customer adds DNS information to primary domain. When he tries
to save configuration Operations Navigator hangs and he loses his config.
APAR = SE10394 OSP-PAR ACCESSING MGTC GRAPH History DATA LOCKS OPERATIONS
NAVIGATOR
Accessing Management Central graph history data locks Operations
Navigator, when viewing the data at one hour intervals.
CIRCUMVENTION:
Customer can work around the problem by using ADDSMTPLE on the
green screen.
CIRCUMVENTION:
Type library name into field.
CIRCUMVENTION:
These values can be changed by the user manually after the
profiles are created by the Universal Connection Wizard.
Expand your system. Expand Network. Expand Remote Access
Services. Expand Originator Connection Profiles. Right click
on the Qesdial (or Qysddial) profile in the list and select
Properties. Click on the Connection tab and select Advanced.
Change the Number of dial attempts to 3, the Delay between
dial attempts to 15 seconds, and the Line inactivity timeout
to 600 seconds. Click OK to set Advanced Properties. Click
OK to set the Properties. Right click on the Qtocl2tp profile
in the list and select Properties. Click the Connection tab.
Change the Line inactivity timeout to 10 minutes. Click OK to
change the Properties.
DATA ACCESS
-----------
DATA TRANSFER
-------------
DATA TRANSFER BASE SUPPORT
--------------------------
APAR = SE10644 CA400EXP-DTRANSFER DBCS CSV FILE CAN BE TRANSFERRED TO SBCS
Data Transfer To iSeries (AS/400) may not report data conversion
warnings if DBCS data is transferred to a SBCS only column.
This is typically the case if the data in the file contains a
mix of DBCS and SBCS data. As a result, no warning is displayed
and DBCS data transferred to the SBCS column is normally corrupt.
After installing this fix a translation error will produce a
warning message. The warning message will contain an OK button
to allow the user to continue the transfer and a Cancel button
to cancel the transfer.
ODBC
----
APAR = SE10057 CA400EXP-ODBC-MSGCWB0111 VERSION 2.0 APPLICATIONS AND UNICOD
When using Microsoft Access 97 to access character columns with
a CCSID of 13488, the error message "CWB0111 Right Truncation
error" is being reported. CCSID 13488 is the CCSID used to hold
unicode (UCS-2) character data. Since Microsoft Access 97 is an
ODBC 2.5 application, it expects unicode fields to be returned
by default with a data type of SQL_CHAR instead of SQL_WCHAR.
There is one problem present with SQLColumns in that it reports
the BUFFER_SIZE field as if it is going to return SQL_WCHAR data
to the user. By default, data will be retrieved as SQL_CHAR so
the length the driver is returning is twice the length it should be.
APAR = SE10773 CA400EXP-ODBC SQL SERVER 2000 LINKED SERVERS RETURN PARTIAL
SQL Server 2000 linked server does not return a complete result
set using SQLExtendedFetch and a rowset size of one with the
Client Access Express ODBC driver. There is no error returned,
just the partial result set.
The SQL Server 2000 tested issues the first fetch with a block
size of 1. It issues a fetch with a block size of 100 and the
rows 1 to 100 are returned. It issues another fetch with a block
size of 100 and rows 101 to 200 are returned. It issues the
final SQLExtendedFetch with a block size of 100 and rows 201 to
261 are returned (that's the end of the result set) with a
SQL_SUCCESS message and SQL_NOROW status in 62 to 100.
SQL Server assumes this is EOF and stops fetching.
OLE DB PROVIDER
---------------
IMPORTANT: If you have the OLE DB component of Client Access Express
installed on a Windows NT or Windows 2000 PC,
and this is the first V5R1M0 service pack installed
on this PC, you should
make sure that an Administrator performs the initial reboot
after the service pack install. The DLL self-registration
that occurs during the reboot requires Administrator
authority. In the event that this recommendation is not
followed, you can self-register the DLL by running the
following command:
regsvr32 "C:\Program Files\IBM\Client Access\cwbzzodb.dll"
(where the actual Client Access Express install directory
is substituted into this command)
No fixes.
APAR = SE10879 CA400EXP PCSWS APPLICATION ERROR WHEN USING SEQUENCE KEY TO
WinNT , Win2K , Ca400exp r510 Si06804 or Si05361 .
Customer uses for one year a software named DTM400 (Inventive
Designer) which replaced OfficeVision400 (Word processing)
For the first time they uses a new Sequence, this sequence is used
to make a Copy/Paste of text.
On ALL PCs , when use the following sequence F1 (begining of the
text to copy) + Enter (End of the text) + Enter (to copy the
selected text at the place where is presently the cursor), then
ATTN (to pass on an alternate session, => CA crashes with the following :
PCSWS.EXE Application Error :
Exception unknown software exception (0xc00000fd) has been
detected in application at location 0x63b74cfc .
PRINTER DRIVERS
---------------
AFP PRINT DRIVER
----------------
No fixes.
EZ-SETUP WIZARD
---------------
No fixes.
---------------------------------
Service Pack Level = SI08389
Build date = May 2003
---------------------------------
MAPI
----
No fixes.
ODBC
----
APAR = SE08671 CA400EXP-ODBC-INCORROUT SQLGETINFO CATALOG_USAGE VALUE RETUR
APAR = SE08723 CA400EXP-ODBC CLOB FIELDS AND NULL VALUES
APAR = SE09057 CA400EXP-ODBC SQLFETCHSCROLL DOESN'T RETURN CORRECT NUMBER O
APAR = SE09116 CA400EXP-ODBC-INCORROUT DATA RETURNED FOR CLOB FIELDS
APAR = SE09139 CA400EXP-ODBC-MSGERROR IN ROW ODBC APPLICATION FAILS WHEN ZE
APAR = SE09168 CA400EXP-ODBC-MSG7357 (1CBD) OLE DB PROVIDER 'MSDASQL'
APAR = SE09746 CA400EXP-ODBC SQLSTATE 22018 ERROR IN ASSIGNMENT
APAR = SE10041 CA400EXP-ODBC-INCORROUT FILE DSN CONFIGURED TO USE WINDOWS U
OLE DB PROVIDER
---------------
No fixes.
PRINTER DRIVERS
---------------
AFP PRINT DRIVER
----------------
No Fixes
EZ-SETUP WIZARD
---------------
No fixes.
---------------------------------
Service Pack Level = SI06804
Build date = November 2002
---------------------------------
MAPI
----
No fixes.
DATA ACCESS
-----------
DATA TRANSFER
-------------
DATA TRANSFER BASE SUPPORT
--------------------------
No Fixes
ODBC
----
APAR = SE06802 CA400EXP-ODBC-INCORROUT RIGHT TRUNCATION ON CHAR DATA
APAR = SE07095 CA400EXP-ODBC-INCORROUT PROBLEM IS RELATED TO EMBEDDED NULLS
APAR = SE07172 CA400EXP-ODBC-INCORROUT NULL OUTPUT PARAMETERS RETURNING
APAR = SE07497 CA400EXP-ODBC-INCORROUT STORED PROCEDURE EXPECTED TO RETURN
APAR = SE07922 CA400EXP-ODBC-INCORROUT UNABLE TO LINK TO SPECIFIC LIBRARY
OLE DB PROVIDER
---------------
APAR = SE08268 CA400EXP-OLEDB-INCORROUT SEEK FUNCTION USED WITH IBMDA400 OL
PRINTER DRIVERS
---------------
AFP PRINT DRIVER
----------------
No Fixes
EZ-SETUP WIZARD
---------------
No fixes.
---------------------------------
Service Pack Level = SI05361
Build date = July 2002
---------------------------------
MAPI
----
No fixes.
DATA ACCESS
-----------
DATA TRANSFER
-------------
DATA TRANSFER BASE SUPPORT
--------------------------
APAR = SE04511 CA400EXP-DTRANSFER-UNPRED UPLOADING BIFF8 FAILS
APAR = SE04637 CA400EXP-DTRANSFER MSG "INVALID DATA PATH" WITH BIFF5
APAR = SE06350 CA400EXP-DTRANSFER-INCORROUT ASCII TEXT WITH ZERO PAD
ODBC
----
APAR = SE03767 CA400EXP-ODBC-MSGSQL0107 POWERBUILDER APPLICATION USING V5R1
APAR = SE04020 CA400EXP-ODBC-INCORROUT NEGATIVE NUMBERS INSERTED AS POSITIV
APAR = SE04119 CA400EXP-ODBC-INCORROUT AUTOCOMMIT ON DOESN'T CHANGE THE
APAR = SE04230 CA400EXP-ODBC-UNPRED MEMORY LEAK ASSOCIATED WITH ENVIRONMENT
APAR = SE04467 CA400EXP-ODBC-INCORROUT DATA TRUNCATION ERROR WITH POWERBUIL
APAR = SE04540 CA400EXP-ODBC-INCORROUT ODBC RETURNS NULL IF LOB THRESHOLD I
APAR = SE04592 CA400EXP-ODBC-MSGSQL0104 ODBC FUNCTIONS WITH MORE THAN ONE
APAR = SE04649 CA400EXP-ODBC-INCORROUT VIEWING TABLE WITH OP NAV INCORRECTL
APAR = SE04726 CA400EXP-ODBC-INCORROUT SP WITH CHAR IN/OUT PARM DOES NOT
APAR = SE04900 CA400EXP-ODBC-INCORROUT DBCLOB DATA WRITTEN INCORRECTLY
APAR = SE04915 OSP-PAR ODBC POOR PERFORMANCE
APAR = SE05199 CA400EXP-ODBC-WAIT JDE ONEWORLD APPLICATION APPEARS TO HANG
APAR = SE06149 CA400EXP-ODBC-INCORROUT INVALID LENGTH REPORTED ON CATALOG
APAR = SE06297 CA400EXP-ODBC-PERFM PARAMETER MARKER DESCRIPTION
APAR = SE06414 CA400EXP-ODBC-MSGSQL0181 AND MSGCPF5035 RC18 ON ODBC TIMESTA
APAR = SE06447 CA400EXP-ODBC-INCORROUT - ODBC FAILS TO RETURN FULL STORED P
APAR = SE06546 CA400EXP-ODBC-MSGCWB0111 CHARACTER DATA RIGHT TRUNCATION WIT
APAR = SE06714 CA400EXP-ODBC-INCORROUT
OLE DB PROVIDER
---------------
APAR = SE04281 CA400EXP-OLEDB-INCORROUT RUNTIME ERROR -2147217887 on OpenIndex
APAR = SE06083 CA400EXP-OLEDB-INCORROUT NUMBER OF ROWS AFFECTED IS INCORRECT
APAR = SE06106 CA400EXP-OLEDB-INCORROUT SINGLE PRECISION DEC INCORRECTLY
INSERTED
APAR = SE06469 CA400EXP-OLEDB-INCORROUT IBMDA400 RETURNS EMPTY RESULT SET F
APAR = SE06588 CA400EXP-OLEDB-UNPRED EXECUTING A PREPARED CALL STATEMENT
PRINTER DRIVERS
---------------
AFP PRINT DRIVER
----------------
APAR = SE05172 CA400EXP 2 UNPRED CANCELED FAX IS STILL SENT
EZ-SETUP WIZARD
---------------
No fixes.
---------------------------------
Service Pack Level = SI02795
Build date = February 2002
---------------------------------
MAPI
----
No fixes.
DATA ACCESS
-----------
DATA TRANSFER
-------------
DATA TRANSFER BASE SUPPORT
--------------------------
APAR = SE02766 CA400EXP-DTRANSFER-MSGSQL0010 DATA TRANSFER WHERE CLAUSE
APAR = SE02833 CA400EXP-DTRANSFER-INCORROUT DATA TRANSFER UPLOAD WITH
ASCII
APAR = SE03076 CA400EXP-DTRANSFER-MSGCWBTF0008 CREATE WIZARD LOSES
EXPONENT
APAR = SE03267 CA400EXP-DTRANSFER-INCORROUT LEADING ZEROS ARE NOT HANDLED
APAR = SE03580 CA400EXP-DTRANSFER-INCORROUT DBCS CELLS INCORRECT IN BIFF8
ODBC
----
APAR = SE02678 CA400EXP-ODBC-MSGSQL0180 TIMESTAMP ESCAPE SEQUENCE CONVERTED
APAR = SE02794 CA400EXP-ODBC-INCORROUT CREATE DSN USING LOWER LETTER FOR
APAR = SE02802 CA400EXP-ODBC-UNPRED FAILOVER FAILURE WITH CA EXPRESS V5R1
APAR = SE02837 CA400EXP-ODBC-MSG3265 SQLPROCEDURECOLUMNS, DRDA, OTHER FIXES
APAR = SE03121 CA400EXP-ODBC-INCORROUT TRANSACTION ISOLATION LEVEL SET
APAR = SE03217 CA400EXP-ODBC-LOOP LOOP APPENDING ROWS USING ODBC
APAR = SE03270 CA400EXP-ODBC-INCORROUT GRAPHIC TYPE DATA IS NOT HANDLED
APAR = SE03278 CA400EXP-ODBC STORE PROCEDURE CALLED VIA ODBC IS NOT RETURNI
APAR = SE03352 CA400EXP-ODBC-INCORROUT SQLCOLATTRIBUTES FOR SQL_DESC_COUNT
APAR = SE03389 CA400EXP-ODBC-INCORROUT SQLEXTENDEDFETCH AND SQLFETCHSCROLL
APAR = SE03417 CA400EXP-ODBC-INCORROUT COLUMNWISE BINDING USED IN CONJUNCTI
APAR = SE03561 CA400EXP-ODBC-UNPRED MS VB RDO APP. REPORTS DIAG�S1003�
APAR = SE03704 CA400EXP-ODBC-INCORROUT THE ODBC DRIVER IS ALWAYS REPORTING
APAR = SA93212 CA400EXP-ODBC-INCORROUT SQL_MAX_LENGTH SQLSETSTMTOPTION
APAR = SE03813 CA400EXP-ODBC-INCORROUT GRAPHIC TYPE DATA IS TRUNCATED WHEN
APAR = SE03814 CA400EXP-ODBC-PERFM - PERFORMANCE WITH SCROLLABLE CURSORS
APAR = SE03815 CA400EXP-ODBC-INCORROUT - BLOCK INSERT PROBLEMS
APAR = SE03816 OSP-DB-INCORROUT CORRUPT DATA WITH LOCAL PACKAGE CACHE
APAR = SE03817 CA400EXP-ODBC-INCORROUT CRASH WHEN BIND_OFFSET_PTR SET
OLE DB PROVIDER
---------------
APAR = SE03328 CA400EXP-OLEDB-INCORROUT ERRORS WITH OLEDB AND SQL SERVER
APAR = SE03505 CA400EXP-OLEDB-MSGCWBZZ5014 ASCII TO ZONED CONVERSION, VALUE
APAR = SE03818 CA400EXP-DBACCESS-OLEDB-MSGCWBZZ5014 DATA CONVERSION ERROR
PRINTER DRIVERS
---------------
AFP PRINT DRIVER
----------------
APAR = SE03819 CA400EXP-INCORROUT FAX PRINTER DRIVER COVER PAGE TEXT
APAR = SE03820 QIWA ERROR INSTALLING PRINTERS ON WINDOWS XP
EZ-SETUP WIZARD
---------------
No fixes.
---------------------------------
Service Pack Level = SI01907
Build date = August 2001
---------------------------------
MAPI
----
No fixes.
DATA ACCESS
-----------
DATA TRANSFER
-------------
DATA TRANSFER BASE SUPPORT
--------------------------
No fixes.
ODBC
----
APAR = SE01815 CA400EXP-ODBC-INCORROUT LIBRARY LISTS FOR EXISTING DATA SOUR
APAR = SE01894 OSP-MSGPWS0006-PAR ODBC - APPLICATION REQUEST FOR STATIC CUR
APAR = SE02158 CA400EXP-ODBC-INCORROUT INVALID TABLE TYPE ON CATALOG REQUES
APAR = SE02205 CA400EXP-ODBC-INCORROUT - NUMERIC COLATTRIBUTE UPDATE LENGTH
APAR = SE02322 CA400EXP-ODBC FAILURE ON PROCEDURE CALL WITH PARAMETER NAMES
APAR = SE02323 CA400WINOPT-ODBC-INCORROUT LOCKED RECORD INDICATES EOF WITH
APAR = SE02324 CA400EXP-ODBC-INCORROUT - NUMERIC CONVERSION PROBLEMS
APAR = SE02325 CA400EXP-ODBC-INCORROUT PROBLEMS WITH ERROR HANDLING
APAR = SE02326 CA400EXP-ODBC-INCORROUT PROBLEMS WITH SQL STMT PARSING
APAR = SE02327 CA400EXP-INSTALL-INCORROUT - CONCURRENCY SETTING NOT HONORED
APAR = SE02328 CA400EXP-ODBC-INCORROUT - MISCELLANEOUS ODBC PROBLEMS
APAR = SE02329 CA400EXP-ODBC-UNPRED - OPTION TO RETURN DB2-DEFINED SQLSTATE
APAR = SE02330 CA400EXP-ODBC-INCORROUT - SQLGETDATA PROBLEMS
APAR = SE02331 CA400EXP-ODBC ERROR IN SQLPARAMDATA
APAR = SE02332 CA400EXP-ODBC-UNPRED - USABILITY ENHANCEMENTS
APAR = SE02333 CA400EXP-ODBC-INCORROUT - BLOCK FETCH ISSUES
APAR = SE02334 CA400EXP-ODBC-INCORROUT - ERROR ON PREPARE OF DRDA & DECLARE
APAR = SE02335 CA400EXP-ODBC LAST BLOCK FETCH FOR CATALOG RETURN SWI
OLE DB PROVIDER
---------------
APAR = SE02336 CA400EXP-OLEDB-UNPRED CHANGE REGISTRY ENTRIES FOR TRACE/LOG
PRINTER DRIVERS
---------------
AFP PRINT DRIVER
----------------
No fixes.
EZ-SETUP WIZARD
---------------
APAR = SE02362 CA400EXP-OPNAV LANGUAGE MISMATCH IN DOMINO EZ SETUP WIZARD
---------------------------------
Service Pack Level = SI01037
Build date = May 2001
---------------------------------
MAPI
----
No fixes.
DATA ACCESS
-----------
DATA TRANSFER
-------------
DATA TRANSFER BASE SUPPORT
--------------------------
APAR = SE01208 CA400EXP-DTRANSFER V4R4/R5 DTF GIVES INCORRECT FILE OPTIONS
ODBC
----
APAR = SE01237 CA400EXP-ODBC-MSGSQL0106 FAILURE WHEN CREATING A TABLE
APAR = SE01238 CA400EXP-ODBC INVALID VALUE RETURNED FOR FLOAT DATA TYPES
APAR = SE01239 CA400EXP-ODBC ADDITIONAL OPTION TO DISABLE PROMPTING
APAR = SE01240 CA400EXP-ODBC-INCORROUT WRONG SQLSTATE VALUE RETURNED
OLE DB PROVIDER
---------------
APAR = SE01241 CA400EXP-OLEDB-INCORROUT SUPPORT FOR MULTIPLE RESULT SETS
APAR = SE01243 CA400EXP-OLEDB-INCORROUT FREE THREADING
PRINTER DRIVERS
---------------
AFP PRINT DRIVER
----------------
No fixes.
EZ-SETUP WIZARD
---------------
Non-APAR fixes.
STATUS:
No status information is displayed while the files are
copied. To determine if the transfers are progressing, look
in the 'CA400CKV' temporary directory (For example
C:\Windows\Temp\CA400CKV). You should see new files appear
periodically.
NOTES:
"Copy install image to PC before installing"
also works for upgrades to a new release, to avoid
the time out over slower communication lines.