Академический Документы
Профессиональный Документы
Культура Документы
Bill of Quantities
Clearing and grubbing road land by mechanical means including uprooting rank
vegetation, grass, bushes, shrubs and trees girth upto 300mm, removal of stumps of
1.01 Ha Rate only
trees cut earlier, disposal of unusable materials and stacking of usable material to be
used or
Cutting of trees including cutting of trunks, branches and removal of stumps and roots
1.02 including stacking of usable material with all leads and lifts and back filling with
approved material in depression/ pit as per Technical Specifications Section 200.
Scarifying existing bituminous road surface and disposal of scarified material with all
1.04 sqm
leads and lifts and as per Technical Specifications Clause 305
Shifting of Utilities complete as per Technical Specifications Clause 201& as per the
1.05*
project requirement.
b) E . Box No.
c) Transformers No.
d) E.Pole No.
Filling in median / island with approved material as per drawings and Technical
Specifications Clause 407 complete with all leads and lifts.
2.05 cum
Loosening and recompacting sub-grade supporting soil for subgrade in all kinds of soil
2.06 complete as per Technical Specifications Clauses 301 and 305. cum
Providing and laying of turfing of earthen shoulders, median and other locations
with grass sods all complete as per Technical Specifications Clause 307.
2.07 sqm
Providing laying, spreading and compacting graded stone aggregates to Water Bound
Macadam (WBM) specification including layng in uniform layers of 75mm thickness
with paver in sub-base/base course on well prepared surface to proper grade and
camber and compacting with vibratory roller to achieve the desired density including
making necessary earthen bund to protect the edges, lighting, barricading and
maintenance of traffic including cost and conveyance of all materials labour charges,
hire charges of machinery etc complete with all leads and lifts and as per specification
3.03 clause 404(MoRTH) and as directed by Engineer In charge Cum
Providing and applying tack coat with bitumen emulsion using emulsion pressure
distributor on the prepared bituminous/granular surface cleaned with mechanical
broom including all material, labour and machinery as with all lead and lift and as per
4.02 Clause 5
a) On granular surface treated with primer or dry and hungry bituminous surface @
2.75 kg per 10 sqm sqm
Providing and layingDENSE BITUMINOUS MACADAM ( DBM ) with 40-60 TPH drum
type hot mix plant using crushed aggregates conforming to grading 2 ( 25 mm nominal
size ) of table 500-10 of MoRTH, premixed with minimum of 4.5% bituminous binder
80/100 grade
4.03 cum
Providing and laying bituminous macadam (BM) with 40-60 TPH drum type hot mix
plant using crushed aggregates grading-2 ( 19mm nominal size ) of table 500-4 of
MoRTH premixed with minimum of 3.5% bituminous binder 80/100 grade, transported
4.04 to site, laid cum
Providing and laying BITUMINOUS CONCRETE ( BC ) with 40-60 TPH drum type hot
mix plant using crushed aggregates conforming to grading 2 ( 13 mm nominal size ) of
table 500-18 of MoRTH, premixed with minimum of 6% bituminous binder 80/100
4.05 grade ( bind cum
Providing , laying and rolling of close- graded premixed surfacing material (PC) of
20mm thickness composed of 11.2mm to 0.09mm (trype -A) or 13.2mm to 0.09mm
(type -B) aggregates using penetration grade bitumen to the required line , grade and
4.07 level to s sqm
Providing and laying of premix stone chip seal coat with HMP of appropriate capacity
using crushed stone chipping 6.75 mm size and penetration bitumen of suitable grade
as per clause 513 (MoRT&H) (Type-A) and as directed by Engineer In charge including
4.08 sqm
Providing and laying of RCC hume pipes 450 mm dia NP-3 grade below the pavement
5.02 of all the roads , with a projection of 300mm at the edge of the pavement/footpath all Rm
as per approved drawings.
Construction of pipe culverts for connecting storm water drains at road crossing with
600mm dia RC Hume pipes NP3 including granular filling, PCC bedding, head wall
etc, as per the specifications of IRC-SP13.
6.01 Rm
Widening of pipe culverts with 900mm dia RC Hume pipes NP3 including granular
filling, PCC bedding, head wall etc, as per the specifications of IRC-SP13.(Contractor
6.03 has to make necessary site visit before quoting) Rm
Pavement marking with hot applied thermoplastic paint 2.5mm thick including
reflectorising glass beads (TYPE 2 Beads) conforming to ASTM D 36/ BS - 3262 - (Part
7.01
I) @ 250gms per sqm area complete as per drawing and Technical Specifications
Clause 803 and I
a) Lane/centre line/edge line/ transverse marking and any other markings. sqm
b) Directional Arrows, lettering etc. as per Drawing No.61 of MOSRTH "Type Design for
sqm
Inter-sections on National Highways".
7.02
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign
as per IRC:67 made of high intensity grade sheeting conforming to Technical
Specifications Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on
a mil
a) Informatory Sign
i.)Direction and Place Identification sign (Direction, Place Identification, Truck Lay bye,
No
etc.)
ii) Facility and Other Useful Facility Information Sign Boards (600 mm x 800mm)-
No
(Public telephone, Petrol Pump)
b) Mandatory Signs
i) Circular (600 mm dia) -Speed Limit No
Providing and laying of PVC pipe, 160 mm dia, (4 ksc or suitable wall thickness as per
EIC) below the pavement of all the roads , with a projection of 300mm at the edge of
the pavement/footpath all as per approved drawings.
7.06 RM
Total Amount Carried to Page Collection
Bill No.8: MISCELLANEOUS
8.01 Maintenance during construction
a) Restoration of rain cuts with soil, moorum, gravel or a mixture of these, cleaning the
loose soil, benching for 300 mm width, laying fresh material in layers not exceeding cum
250 mm and compacting with plate compactor or power rammers to restore the origi
c) Filling Pot holes and Patch works with open graded premix surfacing 20mm, by
removing all failed material, trimming of completed excavation to provide firm vertical sqm
faces, cleaning of surface, applying of tack coat on the sides and base of excavation a