Академический Документы
Профессиональный Документы
Культура Документы
Figure 1.
1. Remove seat and gas tank. Make
sure fuel petcock is in “off”
position.
2. Remove throttle cables paying
close attention to routing, as the
new cables will need too be routed
the same.
3. Remove stock carburetor and stock Pull Cable
throttle cables.
4. Unplug TPS (throttle position
sensor) and tape end off coming Figure 2.
from bike.
5. Remove hot start button and hose
(for externally mounted hot starts
only).
6. Stuff a dry, clean rag into the
intake manifold to keep debris from
entering engine.