Академический Документы
Профессиональный Документы
Культура Документы
Headset overview
2. Connect
STEP 1 Turn Sacool off (press and hold MFB button for 4s).
STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately.
STEP 3 Activate Bluetooth on your phone and select “Avantree Sacool”.
STEP 1 Turn Sacool off (press and hold MFB button for 4s).
STEP 2 Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately.
STEP 3 Activate Bluetooth on your PC/notebook and select “Avantree Sacool”.
NOTE: Make sure PC/notebook is Bluetooth enabled and supports A2DP profile, otherwise you
may need a Bluetooth audio adapter to add the feature on PC/notebook that do not. For details
on how to set up with PC/notebook, please see support.avantree.com
STEP 1 Hold the headset like this with button side in your left hand.
STEP 2 Put the earbuds in your ear from head back with the cord over the ear.
STEP 3 Adjust direction of the earbuds in your ear to make it comfortable.
STEP 4 Adjust the length of the cable by the silicon piece to make it tight.
NOTE: Make sure your phone is in an armband / pocket / handbag on the left of your body.
Otherwise, disconnection will be caused by Bluetooth cross-body issue.
4. How to use
5. How to charge
When the LED blinks red, you should recharge your headphones. Please remove the micro-USB
protector and charge the headset via the supplied USB to AC adapter or PC USB port. It normally
takes about 2 hours to fully charge the battery. The LED will stay red when charging and will turn
off when charging is complete.
6. Product specifications
NOTE: The talk and standby times may vary when used with different mobile phones or other
compatible Bluetooth devices and are also dependant on different usage styles, settings and
operating environment.