Академический Документы
Профессиональный Документы
Культура Документы
a.E6010
b.E7018
c.E6013
d.E8018
3.A FILLET WELD fails by shear and its shear strength is dependent on which factors
a.leg length
5. Which of the following MMA electrode types is generally only suitable for welding in the PA & PB
positions ?
6. A small diameter pipeline is to be laid across the country .which of the following method would
normally be used to detect internal volumetric defects with in the weld
b.RT
C.hydro test
d.PT
a. Travel speed (b) Polarity (c) Arc length (d) Welding current
a.MMA
b.TIG
c.SAW
d.MIG
a.Austenitic SS
b.CS
c.Aluminium
d>Copper
a.upto 24v
b.above 24 v
c.90v
d.50v
12.A pipe line is to be laid across the country .Which of the following methods would normally to based
to detect root defects ?
a. Eddy current testing (B) Radiography (c) Hydrostatic testing (D) Liquid penetrant inspection
13. A small diameter pipeline is to be laid across the country.which of the following method would
normally be used to detect internal volumetric defects with in the weld
a.eddy current test
b.RT
c.Hydro test
d.PT
14. A short transverse tensile lest (as STRA Test ) will give ?
a. The tensile strength of the weld .(B) indication of susceptibility to lamellar tearing
c. The stress/stain characteristics of the weld (D. The stress /stain susceptibility to hydrogen
cracking
15. Weld –ments in carbon –manganese steels made using a higher than specified Heat input may
show:
a. Higher integrity (B) lower distortion (c) lower toughness (d) higher hardness
16. ------- shock is very hazardous because it is much greater than the -------- of the weldingequipment
a. corrosion interaction .(B ) Work hardening © stress concentrations (d)All of the above
a. aluminum alloys b. Carbon Steels .c. Austenilic stainless steels D .All of the above
a. surface breaking planar flaws B. Undercut. C Buried planar flaws .d. Non planar surface flaws
20.Welding process that use flux are some times considered to be better than non fluxed processes
because:
a. Fluxes maybe dried to give lower hydrogen levels B. Fluxes have a greater tolerance of
surface contaminants . C They are good for welding very reactive metals .D all of the above
21.The “output characteristics of a typical GTAW power source , for manual welding is ?
A. Constant Voltage .B) Constant Current C) Flat D) . pulsing
a. BS EN 499
b. BS EN 288
c. BS EN 22553
d. BS EN 287
23. According to AWS 2.4 a weld symbol “below the reference line “ refers to :
25. What is the abbreviation for a welding procedure e specification that has been written for the
purpose of qualifying weld procedure test weld ?
a. WPS
B. PWPS
c. UWPS
d. Wpstbt
27.For SAW , which of the following has the greatest effect on the finished weld profile ?
a. Arc voltage
b. open voltage
c.polarity
28.Tungsten electrodes used for TIG welding of carbon steel may contain a small percentage of:
a. zirconiated
b. thoria
c.India
d. titania
29.What element may cause a carbon steel weld to suffer from “hot shortness?
a. Silicon
b. martensite
c. manganese
d.sulphur
30.Which welding position would normally give the highest heat input during MMA welding ?
a. PA(1G)
b. PF,3G
c. PC(2G)
d.PA/PB