Академический Документы
Профессиональный Документы
Культура Документы
User’s Manual
1
The signs and symbols used in this manual.
This is the warning sign.
The words following the sign contain the most important information
related to the material goods safety. Pay attention to the clue. According to
the influence (damage) on people or on the material goods, this sign is
used with such words as danger, notice and caution.
Denote the operations and steps, the instruction, additional remarks that
should be pay attention to.
The chapters and other manuals that should be paid attention to.
V3.2.0.1
Contents
Contents
About FotoCenter 1
Start FotoCenter 1
Remark 1
Instruction of FotoCenter Interface 2
i V3.2.0.1
Contents
Introduce Page “List” 45
Introduce Functions on Page “List” 46
Status Bar 49
Parameter Page 51
Parameter Settings 51
Application 51
Pretreatment 56
Client 58
ii V3.2.0.1
Contents
iii V3.2.0.1
Contents
iv V3.2.0.1
About FotoCenter
About FotoCenter
Start FotoCenter
Remark
FotoCenter supports the following two display resolution: 1024 * 768 and 1280 * 1024.
1 V3.2.0.1
About FotoCenter
The following table lists the numbers and titles as well as descriptions of their corresponding areas.
No. Title Description
1 “Param” Click to popup the page “Parameter” for parameter settings
2 “Device” Click to popup the page “Device” for printing devices settings and
related
3 “Minimize” Click to minimize the software interface
4 “Close” Click to exit the program and return to the operating system
5 “Main” Main operation page for users. Page “Edit” is set as default
6 “Status” Display server status
7 “Time” Where current time is showed
2 V3.2.0.1
Instructions of Page for Image Editing
All the functions of editing images can be accessed by selecting page “Edit” in FotoCenter main page.
1. When starting FotoCenter,
page “Edit” is showed as
default.
3 V3.2.0.1
Instructions of Page for Image Editing
The following table lists the numbers and titles as well as descriptions of their corresponding areas
No. Title Description
1 “Edit” Click to switch to the page for image editing
2 “Space” Click to select work space. There are 4 work spaces in all. Each of them
can work separately
3 District for image preview Show the preview of edited images
4 Functional area for editing There are 4 sub-pages with different functions
5 Functional area for cut and Display the focused image. Allow adjustment of the image’s exposal
rotation district
6 “Page” Display the current page
7 “Small Mode” Switch to small image mode preview
7 “Middle Mode” Switch to middle image mode preview
8 “Full Mode” Switch to full image mode preview
10 “Load” Popup dialogue “Load image”, where to select and load images to
current workspace
11 “Save” Save selected images in current space to database
12 “Delete” Delete selected images in current space
13 “Clean” Delete all images in current space
14 “Channel” Popup dialogue “Channel”, where to select paper channel for current
space
4 V3.2.0.1
Instructions of Page for Image Editing
15 “Batch” Switch to “Batch” mode. Images selected or focused currently are set
as “LINK”
16 “Prev” Page up
17 “Next” Page down
18 “Expose” Transfer all images in current space to exposal list except those are not
tagged with “Pass” or “Printed
19 “Paper channel info” Display paper channel information of current space
5 V3.2.0.1
Instructions of Page for Image Editing
Load Image
Click “Load” on page “Edit” to popup dialogue “Load Image”, where you can select the images to load.
The current software supports the following image format: BMP / bmp, jpeg /JPEG, jpg.
There are several ways to load images as follows:
Load images from “My Computer”
Load images from media
Load saved images from image database
6 V3.2.0.1
Instructions of Page for Image Editing
7 V3.2.0.1
Instructions of Page for Image Editing
Images can be loaded directly from the following removable media: CF, Memory Stick, SMC, Micro Disk,
MMC, SD, CD/DVDROM and removable disk.
1. Click “Load” on page “Edit”, and dialogue “Load Image”
will popup.
8 V3.2.0.1
Instructions of Page for Image Editing
2. Select “DB”.
9 V3.2.0.1
Instructions of Page for Image Editing
There are 4 workspaces in FotoCenter. Each space, with its own printing channel, could work
independently.
Click tag to select workspace, and deal with your images.
Different workspaces could be operated simultaneously in the following cases:
1> While transferring images in space A, editing in space B is allowed.
2> While editing images in space A, image editing in space B is allowed.
Click “SpaceX” to select workspace.
Image State
“PASS”. Images in such state will not be sent to exposal list。Right- clicking the
Pass image can switch "PASS" on and off.
"PRINTED". Images in such state will not be sent to exposal list. Transferred
PRINTED images will be tagged with "PRINTED". Left-clicking the images can switch off
the state.
Focused state. Image in such state, decorated with red frame, is the one being
FOCUSED
edited at current. All modification in parameters will be applied on it.
10 V3.2.0.1
Instructions of Page for Image Editing
“LOCKED”. When sending images, all pictures of the same space are
LOCKED "LOCKED". No operation is allowed. When transfer is finished, images will be
unlocked.
“LINK”. When switching to “Batch” mode, images selected and focused will
LINK be in such state. The state could be changed under “Batch” mode. After
exiting, tag “LINK” disappears.
11 V3.2.0.1
Instructions of Page for Image Editing
There are three image preview modes in FotoCenter: "Small Mode", "Middle Mode" and "Large Mode"
12 V3.2.0.1
Instructions of Page for Image Editing
11
1 2 3 4 5 6 7 810 12 13
13 “Gamma Channel”
Select proper “Gamma Channel”
13 V3.2.0.1
Instructions of Page for Image Editing
Load image
Click to popup dialogue “Load Image”, where to
load images from local disk, removable media or
database.
Save image
2. Click “Save”.
14 V3.2.0.1
Instructions of Page for Image Editing
2. Click “Delete”.
15 V3.2.0.1
Instructions of Page for Image Editing
Clean workspace
Delete all images in the current workspace.
1. Select workspace to clean.
2. Click “Clear”.
16 V3.2.0.1
Instructions of Page for Image Editing
3. Click to confirm.
4. Click to cancel.
17 V3.2.0.1
Instructions of Page for Image Editing
18 V3.2.0.1
Instructions of Page for Image Editing
Page turning
If one page cannot contain all the images loaded, turn page to view more.
Click “Prev” to get to the previous page and “Next”
to the next page.
Send images
When editing is completed, send images to exposal list to be exposed.
1. Click “Expose” to send images.
19 V3.2.0.1
Instructions of Page for Image Editing
20 V3.2.0.1
Instructions of Page for Image Editing
1 2 3 4 5 6 7
The following table shows the numbers and their corresponding descriptions.
No. Title Description
1 “Fix” Auto-cut. May not include the full image
2 “Full image” Contain the full image, but the possible white area as well
3 “90 left rotation” Rotate the image 90 degrees to the left
4 “90 right rotation” Rotate the image 90 degrees to the right
5 “Left rotation” Rotate the cut area to the left
6 “Angle of rotation” Angle for rotation of the cut area, with a range from -45 degrees to 45 degrees
7 “Right rotation Rotate the cut area to the right
8 “Cut image size” Adjust size of the cut area
21 V3.2.0.1
Instructions of Page for Image Editing
This area has 4 functional pages for basic adjustment, level, curve, and advanced options separately.
The following table lists instruction for the basic function page
NO. Title Description
1 Reset “Cyan” Click to reset “Cyan” to 0
2 Decrease “Cyan” Click to decrease “Cyan” by 1, which varies from -10 to 10
3 Increase “Cyan” Click to increase “Cyan” by 1, which varies from -10 to 10
4 Reset “Magenta” Click to reset “Magenta” to 0
5 Decrease “Magenta” Click to decrease “Magenta” by 1, which varies from -10 to 10
6 Increase “Magenta” Click to increase “Magenta” by 1, which varies from -10 to 10
7 Reset “Yellow” Click to reset “Yellow” to 0
8 Decrease “Yellow” Click to decrease “Yellow” by 1, which varies from -10 to 10
9 Increase “Yellow” Click to increase “Yellow” by 1, which varies from -10 to 10
10 Reset “Density” Click to reset “Density” to 0
11 Decrease “Density” Click to decrease “Density” by 1, which varies from -10 to 10
12 Increase “Density” Click to increase “Density” by 1, which varies from -10 to 10
13 Reset “Contrast” Click to reset “Contrast” to 0
14 Decrease “Contrast” Click to decrease “Contrast” by 1, which varies from -10 to 10
15 Increase “Contrast” Click to increase “Contrast” by 1, which varies from -10 to 10
22 V3.2.0.1
Instructions of Page for Image Editing
23 V3.2.0.1
Instructions of Page for Image Editing
1 2 3
5 67
8 9
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Lower limit of input” Set “Lower limit of input”, which ranges from 0 to 253
2 “Gamma” Set input “Gamma” value, which ranges from 0.1 to 9.9
3 “Top limit of input” Set “Top limit of input”, which ranges from 1 to 255
4 “Input” slider It changes with the upper three edit boxes for input level and vice versa
5 “Lower limit of output” Set “Lower limit of output”, which ranges from 0 to 255
6 “Top limit of output” Set “Top limit of output”, which ranges from 0 to 255
7 “Output” slider It changes with the upper two edit boxes for output level and vice versa
8 “Channel” Select “Channel” (“RGB”, “R”, “G”, or “B”) for level adjustment
9 “Reset” Click to reset all the values
24 V3.2.0.1
Instructions of Page for Image Editing
2 3
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Curve Preview” Area for “Curve Preview”. Drag the white point to change curve shape
2 “Channel” Select “Channel” (“RGB”, “R”, “G”, or “B”) for curve adjustment
3 “Reset” Reset the curve to initial shape
25 V3.2.0.1
Instructions of Page for Image Editing
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Certificate photo” Popup dialogue “Certificate” to generate certificate photos
2 “Index photo” Popup dialogue “Index” to generate index photos
3 “Red eye remover” Popup dialogue “Red Eye Remover” to remover red eye
4 “Facial prettification” Popup dialogue “Facial prettification” to deal with complexion
5 “White balance” Popup dialogue “White balance” to correct white balance
6 “Noise reduce” Popup dialogue “Noise reduce” to reduce noises
7 “Style” Popup dialogue “Style” to make images into various styles
8 “Frame” Popup dialogue “Frame” to deal with frames
9 “Text” Popup dialogue “Text” to deal with texts
26 V3.2.0.1
Instructions of Page for Image Editing
Generate certificate photo and add it to the end of image list in workspace.
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Template preview” Preview the generated photo of current settings
2 “Cut area” Cut source image
3 “Cut area” slider Change the size of cut area
4 “90 right rotation” Rotate source image 90 degrees clock wise
5 “Angle” Set the angle of image rotation, which ranges from -45 to 45 degrees
6 “Repeat” Set the printing count for certificate photo
7 “Select size” Select size once set
8 “Edit size” Popup dialogue “Size” for editing
27 V3.2.0.1
Instructions of Page for Image Editing
9 “Keep scale” When selected, width and height various with the same scale
10 “Width” Set width for a single certificate
11 “Height” Set height for a single certificate
12 “Measure” Select measure for size of photo
13 “Use channel” Switch certificate correction on / off
14 “Certificate correction Select available certificate correction channel
channel” list
15 “Set” Set certificate correction channel
16 “OK” Generate certificate and exit the dialogue.
17 “Cancel” Exit the dialogue without generating certificate
2 3 4 5
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
1 “Size” list List all sizes once set
2 “Add” Popup dialogue “Add Size” to add new size
3 “Edit” Popup dialogue “Edit Size” to edit selected size
4 “Delete” Delete the selected photo size
5 “Close” Close the dialogue and finish operation
28 V3.2.0.1
Instructions of Page for Image Editing
29 V3.2.0.1
Instructions of Page for Image Editing
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Channel list” List the exited channels
2 “Add” Popup dialogue “Add Channel” to add new channel
3 “Delete” Delete the selected channel. The channel in use could not be deleted
4 “Parameter list” Parameter list of channel
5 “Edit” Popup dialogue “Adjust Param” to set parameters
6 “OK” Exit the dialogue
30 V3.2.0.1
Instructions of Page for Image Editing
31 V3.2.0.1
Instructions of Page for Image Editing
32 V3.2.0.1
Instructions of Page for Image Editing
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
1 “Index photo preview” Preview the generated photo of current settings
2 “Parameters” Set parameters for index photo
3 “Column” Set count of photos in each line
4 “File name position” Set file name position
5 “Font” Popup dialogue “Font” to set font for file name
6 “File name preview” Preview file name style
7 “Remark” Set remark
8 “Font” Popup dialogue “Font” to set font for remark
9 “Edit” Input custom remark
10 “Generate now” Tick “Generate now”, and index photo will be generated after clicking “OK”
11 “Add after exposal” Tick "Add after exposal", and an index photo will be made of all images
sent to exposal before they are transferred
12 “OK” Save settings of index photo and close the dialogue. If "Generate now" is
ticked, an index will be made of all selected images in current workspace
after exit
13 “Cancel” Cancel operation and exit the dialogue
33 V3.2.0.1
Instructions of Page for Image Editing
Dialogue “Font”
5 1 2
4
3
6 7
9 10
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
1 "Font" list Select font in the list
2 "Size" list Select size in the list
3 "Color" Click to popup dialogue "Color" for color
4 "Bold" Bold
5 "Italic" Italic
6 "Underline" Add underline
7 "Strikeout" Add strike
8 "Preview" Preview text style
9 "OK" Apply and exit
10 "Cancel" Undo setting and exit
Dialogue “Color”
Please take function “Text” for reference.
34 V3.2.0.1
Instructions of Page for Image Editing
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
1 “Preview” Effect preview
2 “Operation area“ Buttons to operate on the image
3 “Radius” Radius of red eye remover area
4 “Replace original image” Tick to replace original image
5 “Reset” Reset image to initial status
6 “OK” Finish and exit
7 “Cancel” Cancel and exit
35 V3.2.0.1
Instructions of Page for Image Editing
Facial Prettification
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
1 “Preview” Effect preview
2 “Operation area” Buttons to operate on image
3 “Area” Set disposal area
4 “Strength” Set disposal strength
5 “Complexion” Set complexion
6 “Sharpness” Set sharpness
7 “Clear spot” Apply function of “Clear spot”
8 “Clean highlight” Apply function of “Clean highlight”
9 “Keep wrinkles” Apply function of “Keep wrinkles”
10 “Compare” Click down to show original preview and release to view disposal effect
11 “Replace original image” Tick to replace original image
12 “OK” Finish and exit
13 “Cancel” Cancel and exit
36 V3.2.0.1
Instructions of Page for Image Editing
White Balance
1 2
3 4 5 6
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Preview” Effect preview
2 “Range” Set extend for correcting white balance
3 “Compare” Click down to show original preview and release to view disposal effect
4 “Replace original image” Tick to replace original image
5 “OK” Finish and exit
6 “Cancel” Cancel and exit
37 V3.2.0.1
Instructions of Page for Image Editing
Noise Reduce
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Preview” Effect preview
2 “Operation area” Buttons to operate on image
3 “Compare” Click down to show original preview and release to view disposal effect
4 “Replace original Photo” Tick to replace original image
5 “OK” Finish and exit
6 “Cancel” Cancel and exit
38 V3.2.0.1
Instructions of Page for Image Editing
Style
1 2
5 6 7 8
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Preview” Effect preview
2 “Style” Select style for image
3 “Degree” Set degree for style applying
4 “Exposal Brightness” Set brightness for images
5 “Compare” Click down to show original preview and release to view disposal effect
6 “Replace original image” Tick to replace original image
7 “OK” Finish style setting and exit
8 “Cancel” Cancel operation and exit dialogue
39 V3.2.0.1
Instructions of Page for Image Editing
Frame
1 2
4
6
7 8 9 10
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Preview” Effect preview
2 “Image Region” Cut area settings
3 Set “Image Region” Set size of cut area
4 “90 right rotation” Rotate image 90 degrees wise clock
5 “Angle of rotation” Set angle of rotation for cut area, which ranges from –45 to 45 degrees
6 “Frame Template” List all frame templates available
7 “Apply” Apply selected frame to image preview
8 “Replace original Image” Tick to replace original image
9 “OK” Finish and exit
10 “Cancel” Cancel and exit
40 V3.2.0.1
Instructions of Page for Image Editing
Text
1 2
3
4
6
5
10 9 11 12
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Preview” Effect preview. Drag text to set position and size
2 “Edit” Edit text added to image
3 “Add” Add input content to image preview
4 “Modify” Modify content and color of the text according to configuration
5 “Bold” Set text “Bold”
6 “Italics” Set text “Italics”
7 “Font” Select font for text
8 “Transparent” Set “Transparent” for text and background which is mixed. 0 for
completely transparent text
9 “Color” Popup dialogue “Color” to set text color
10 “Replace Original Image” Tick to replace original image
11 “OK” Finish and exit
12 “Cancel” Cancel and exit
41 V3.2.0.1
Instructions of Page for Image Editing
1 2
5
4 4
6 7 8 9
10 11
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Homo” Set text color homo
2 “Color” Popup dialogue “Color” to set text color
3 “Gradual change” Set text color gradual changed
4 “Gradual color” Set color on the left/top or right/bottom of text
5 “Gradual color exchange” Change the color of two sides
6 “Gradual change from left to right” Text color gradually changes from left to right
7 “Gradual change from top to bottom” Text color gradually changes from top to bottom
8 “Gradual change from left-up to right-bottom” Text color gradually changes from left-up to
right-bottom
9 “Gradual change from left-bottom to right-up “ Text color changes gradually from left-bottom to
right-up
10 “OK” Button Finish and exit
11 “Cancel” Button Cancel and exit
42 V3.2.0.1
Instructions of Page for Image Editing
Dialogue “Color”
Dialogue “Color”, for color setting.
2 5
6 7 8
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Custom” Custom color display district. Click to select color
2 “Current” The currently selected color
3 “Red” Red, ranging from 0~255
4 “Green” Green, ranging from 0~255
5 “Blue” Blue, ranging from 0~255
6 “Add to custom” Click to add the current color to custom
7 “OK” Apply selected color and exit
8 “Cancel” Cancel and exit
43 V3.2.0.1
Instructions of Page for Image Editing
Photo printing list managers printing order. It deals with sent image trades, changes printing order and
pauses / continues exposal
Select “List” in FotoCenter main page to enter page for photo printing list.
44 V3.2.0.1
Instructions of Page for Image Editing
1 2
4 5 6 7 8 9 10
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “In queue” Display the next image to be printed
2 “Current” Display image being printed
3 “Printing list” List all printing items
4 “Shift up” Shift the selected item one row up to be printed earlier
5 “Shift down” Shift the selected item one row down to be deferred
6 “Top” Shift up the selected item to top of list to be first printed
7 “Pause” Pause exposing images of selected trade
8 “Resume” Resume exposing the selected trade
9 “Match” Switch channel to fit the selected trade
10 “Delete” Remove the selected item from printing list
45 V3.2.0.1
Instructions of Page for Image Editing
Shift Up
1. Select the item to be shifted up.
Shift Down
1. Select the item to be shifted down.
46 V3.2.0.1
Instructions of Page for Image Editing
Top
1. Select the item to be shifted to top of list.
Pause
1. Click “Pause” to
pause exposing the
current trade.
Resume
1. Click “Resume” to
continue exposing
the current trade.
Remove
1. Select the item to be removed.
47 V3.2.0.1
Instructions of Page for Image Editing
48 V3.2.0.1
Instructions of Page for Image Editing
Status Bar
Here lists information such as the current channel, status of carrier and trade. Additionally, function of
emergency pause / resume of engine is available here.
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Channel” Information of the channel currently in use
2 “Server status” Current status of carrier
3 “Printing info” Total count of images printed
4 “Current trade info” Printed count / total count (of the trade currently in print)
5 “Wobble”
Show wobble status. for on and for off
49 V3.2.0.1
Parameter Page
50 V3.2.0.1
Parameter Page
Parameter Page
Parameter page includes sub-pages of “Application”, “Predeal” and “Client”.
Parameter Settings
Page “Application” includes functions as follows: setting password, selecting language, loading and saving
configuration and path management.
Application
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
51 V3.2.0.1
Parameter Page
Set Password
1. Input old password (if no password, no such
request).
2. Input new password.
3. Input new password to confirm.
Select Language
1. Select your language.
2. Click “Apply” to finish. (The language
will take effect next time you start the
program).
52 V3.2.0.1
Parameter Page
Load configuration
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
53 V3.2.0.1
Parameter Page
Load
Save configuration
2 3 4
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
54 V3.2.0.1
Parameter Page
Hot key
Click “Hot Key” to enter dialogue “Hot Key”, where lists all hot keys FotoCenter supports and their
corresponding instructions.
3. Click to finish.
55 V3.2.0.1
Parameter Page
Pretreatment
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Cyan” Set pretreatment parameter for “Cyan”
2 “Magenta” Set pretreatment parameter for “Magenta”
3 “Yellow” Set pretreatment parameter for “Yellow”
4 “Density” Set pretreatment parameter for “Density”
5 “Contrast” Set pretreatment parameter for “Contrast”
6 “Saturation” Set pretreatment parameter for “Saturation”
7 “Sharpness” Set pretreatment parameter for “Sharpness”
8 “Standard” Select Gamma channel “Standard”
9 “Portrait” Select Gamma channel “Portrait”
10 “Landscape” Select Gamma channel “Landscape”
11 “Nocturne” Select Gamma channel “Nocturne”
12 “Extend 1” Select Gamma channel “Extend 1”
13 “Extend 2” Select Gamma channel “Extend 2”
14 “Extend 3” Select Gamma channel “Extend 3”
15 “Extend 4” Select Gamma channel “Extend 4”
16 “Max Original Picture” Contain the full image
17 “Max Cut Region” Max cut region
18 “Select Space” Select space for pretreatment parameters settings
19 “Use ACC” Switch “ACC” function on or off
20 “Clear-up” Switch “Clear-up” function on or off. Set range for it
56 V3.2.0.1
Parameter Page
57 V3.2.0.1
Parameter Page
Client
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
“Printing Setting” Set exposal style in various modes. All images in one space
1
will be sent to exposure as default
2 “Batch Param” Set parameters available in batch mode
3 “File Name” Tick to show full path of image file
Set image preview size of various mode, “Normal Size” as
4 “Photo Mode View”
default
58 V3.2.0.1
Page for Device Management
Page “Channel”
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
1 “Status” Display “Status” of channel. The one in current use is tagged with
icon
2 “Name” Display “Name” of channel
59 V3.2.0.1
Page for Device Management
60 V3.2.0.1
Page for Device Management
61 V3.2.0.1
Page for Device Management
1
2
5 6
8
10 11
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
62 V3.2.0.1
Page for Device Management
63 V3.2.0.1
Page for Device Management
Wizard
1. Click “Wizard” to popup dialogue “Mode”.
64 V3.2.0.1
Page for Device Management
65 V3.2.0.1
Page for Device Management
Set Wobble
4. Click to apply.
5. Click to cancel.
66 V3.2.0.1
Page for Device Management
3. Click to save.
67 V3.2.0.1
Page for Device Management
Color Management
68 V3.2.0.1
Page for Device Management
Gamma correction parameters can be used to improve color quality of exported images.
There are 3 colors for Gamma correction parameters, red, green and blue respectively. Besides, there
are 8 channels for Gamma parameters, standard ones, portrait, landscape, nocturne and 4 expanding
channels respectively. Each of them could be set separately.
69 V3.2.0.1
Page for Device Management
The following table lists buttons in Gamma channel selection area and their descriptions
Button Description Button Description
1. Single click any one in the color channel list of key values.
2. Single click the “New” button and the dialogue for adding key value will pop up.
3. Directly enter key values or use spin button.
4. Single click the “OK” button.
For key value modification dialogue, illegal enter for X coordinate is between 0 and
255. As for Y coordinate, value from 0 to 255 is acceptable.
71 V3.2.0.1
Page for Device Management
There are 8 Gamma correction channels available, standard, portrait, landscape, nocturne, and four
extend channels. Each channel can be singly set to satisfy different pattern requirements.
You can duplicate one or all the Gamma channels from other paper channels to the appointed channel.
72 V3.2.0.1
Page for Device Management
73 V3.2.0.1
Page for Device Management
Hardware Uniformity
4. Click to save.
Software Uniformity
3. Click to save.
74 V3.2.0.1
Page for Device Management
Addition Channel
Set add-ons
1. Select channel in the list.
2. Select “Closed” to invalidate additional
channel.
3. FotoCenter has two default channels named
“Default_1” and “Default_2”. If you are not
equipped with a densitometer, select one of
them according to character of your
machine.
4. If you complete adjustment of “Add
Channel” with a densitometer, a channel
named “UserDefined” will be added to the
list.
5. Click to save.
6. Click to cancel.
75 V3.2.0.1
Page for Device Management
Server
The following table lists the numbers as well as titles and description of corresponding areas.
NO. Title Description
1 “Cyan” Show exposal time of Cyan
2 “Magenta” Show exposal time of Magenta
3 “Yellow” Show exposal time of Yellow
4 “Setup” Click to enter dialogue “Exposal Time”
5 “Mirror” Select “Mirror” style
Exposure time can be divided into three parts, cyan, magenta and yellow, referring respectively to
functioning time of red, green and blue light on the printing paper. Give an example of black block on
the standard test image. The longer the red exposure time, the higher the cyan density in the black
block; the longer the green exposure time, the higher the magenta density in the black block; and the
longer the blue exposure time, the higher the yellow density in the black block.
76 V3.2.0.1
Page for Device Management
4. Click to save.
5. Click to cancel.
77 V3.2.0.1
Page for Device Management
The following table lists the numbers as well as titles and description of corresponding areas.
No. Title Description
1 “Current test image” Display current test image
2 “Candidate test images” 6~8 candidate images in all
3 “Extend” Tick to extend image pro rata when printed
4 “Count” Set repeat count of current test image
5 “Print” Click to print the test image
78 V3.2.0.1
Page for Device Management
The image box in the left shows the current test image.
On page “Print”, repeat count of test images can be set at the bottom.
In edit box “Repeat”, directly enter repeat count or single click to set it.
79 V3.2.0.1
Page for Device Management
Device
The following table shows the numbers and their corresponding descriptions.
NO. Title Description
1 Status of printing controller Show status of printing controller
2 Status of printing adapter Show status of printing adapter status
3 “Connect” Click to connect printing devices
4 “Disconnect” Click to disconnect print devices
5 Status of densitometer Show status of densitometer
6 “Adjust ” Densitometer connected, click to start white adjustment
7 “Connect” Click to connect the densitometer
8 “Disconnect” Click to disconnect the densitometer
80 V3.2.0.1
Page for Device Management
Description of Adjustments
The following table shows the numbers and their corresponding descriptions.
No. Title Description
1 “Focusing” Click to enter dialogue “Set Lens Focus”
2 “Exposal Level” Click to enter dialogue “Exposal Level”
3 “Hard Uni” Click to enter dialogue “Select Uniform” to adjust hardware uniform
4 “Soft Uni” Click to enter dialogue “Select Uniform” to adjust software uniform
5 “Gamma” Click to enter dialogue “Select” to modulate “Gamma” curve
6 “Add Channel” Click to enter dialogue “Additional Channel”
7 “Standard” Click to enter dialogue “Standard Setting” for auto-adjustment with a
densitometer
8 “Close” Click to exit
81 V3.2.0.1
Page for Device Management
Focus Function
Focusing function allows you to correct lens focus and modulate display position of electronic negative
with ease.
Click “Focusing” on page “Selection” to enter dialogue “Set Lens Focus”.
1 2
3
82 V3.2.0.1
Page for Device Management
The following table shows the numbers and their corresponding descriptions.
No. Title Description
1 “Preview” Preview test image
2 “LED Controller” Select LED color for displaying image
3 “Open” Open shutter, start focusing
4 “Close” Close shutter, finish focusing
5 “Exit” Exit the page
Start/exit focusing
Start focusing
Single click the “Open” button and focus images will appear in the electronic carrier.
End focusing
Exit focusing
83 V3.2.0.1
Page for Device Management
84 V3.2.0.1
Page for Device Management
The following table shows the numbers and their corresponding descriptions.
No. Description No. Description
1 District for measurement 2 “Parameters”
3 “Print” 4 “Adjust”
5 “Exit”
85 V3.2.0.1
Page for Device Management
Uniformity Adjustment
8. Click to exit.
86 V3.2.0.1
Page for Device Management
8. Click to exit.
87 V3.2.0.1
Page for Device Management
With “Full Mode” selected in the above dialogue, click to enter dialogue “Uniform Adjustment”.
The following table shows the numbers and their corresponding descriptions.
No. Description No. Description
1 Uniform image editing preview 2 Operation
3 Information 4 Functional Area
5 “Exit”
88 V3.2.0.1
Page for Device Management
Functional buttons
When the picture is not fully displayed in preview area, you can drag to
Drag view other part of the image. , and the mouse will change to .
Keep the left key of mouse, and the picture will be dragged as the mouse
moves.
Zoom In Click , and the mouse will change to . Left-click on the picture,
and it will be enlarged around the focus of the mouse.
Zoom Out Click , and the mouse will change to . Left-click on the picture, and
it will be around the focus of the mouse.
Auto Fit Click , with proper scale, you could get a complete view of the picture
89 V3.2.0.1
Page for Device Management
Select “Full Mode” in the list on page “Select Uniform”, and click to enter dialogue “Uniform
Adjustment”
Step 1:
1. Click “Print” to print the test image.
2. “Load” image or get it from a
scanner. (Confirm that you have
selected correct scanner before
clicking “Scan”).
3. With image loaded, click “Next” to
continue.
Step 2:
1. You could sharpen the image,
modulate contrast of it as well as
clear spot on it. (Click “Reset” , and
the image will be reset to the initial
status).
2. You could save edited image to local
computer by clicking “Save”.
3. After editing the image, click “Next”
to continue.
About clearing spots:
1) Click “Select”, and click on
smooth area of the image.
2) Set “Radius”, “Rigidity”,
“Opacity” , and click “Set”.
3) Repeat clicking the dirty part
until spot disappears.
90 V3.2.0.1
Page for Device Management
Step 3
1. If anchor points are successfully
searched and found automatically,
you’ll see the image as left.
2. If “Center” point or “Direct” point is
not found correctly, you can set
their positions manually.
3. All anchor points in their proper
position, click “Next” to continue.
91 V3.2.0.1
Page for Device Management
Step 4:
1. Effective area of the image is given,
along with the parameters for cut.
(Tick “Keep Zero” to invalidate cut ,
thus making use of data of full
image). This step is useful in
making uniformity of partial image.
2. When effective area is set, click
“Next” to continue.
Step 5:
1. Enter proportion for modulating(70
as default), and click “Adjust” to
generate uniform file. Thus, a
uniform file has been successfully
made.
How to make uniform of full image is introduced above. Adjustment in “Partial Mode1X2” is alike.
You should pay attention to the difference that, in “Partial Mode”, you have to repeat all steps of adjustment in
“Full Mode”. Deal with the left part of image first, the right part later. (Here we suppose “Center” point is on left
of the “Direct” point.)
92 V3.2.0.1
Page for Device Management
Select “Partial Mode1X2” in the list on page “Select Uniform”, and click to enter dialogue “Uniform
Adjustment”.
Step 1:
1. Click “Print” to print the test
image. Scan the left part of it.
For carrier of 1280x1024, the
left 9 columns of anchor point
must be included in the scanned
part. In the case of
1400x1050, 8 columns of anchor
points is a must.
2. Click “Load” or “Scan” to get
image input according to the
information.
3. Click “Next” to continue then.
Step 5:
Click “Next” to load the right part of
the image.
93 V3.2.0.1
Page for Device Management
94 V3.2.0.1
Page for Device Management
Gamma Correction
Select Gamma
3 4 5
The following table shows the numbers and their corresponding descriptions.
No. Description No. Description
1 Gamma Curve Preview 2 Gamma channel selection
3 “Current” 4 “OK”
5 “Cancel”
95 V3.2.0.1
Page for Device Management
The following table shows the numbers and their corresponding descriptions.
No. Description No. Description
1 District for Gamma adjustment 2 “Print”
3 “Adjust” 4 Select Gamma Curve
5 Preview of curve modulating effect 6 Illustration of comparison between standard
density and current density
7 “Exit”
96 V3.2.0.1
Page for Device Management
97 V3.2.0.1
Page for Device Management
By selecting “Standard” in dialogue “Selection” could you enter the page for setting standard.
The following table shows the numbers and their corresponding descriptions.
No. Description No. Description
1 Standard list 2 “OK”, apply the new standard and exit
3 “Cancel”, undo modification and exit
98 V3.2.0.1
Page for Device Management
exit.
99 V3.2.0.1
Page for Device Management
It’s the last step of adjustment. If channel “UserDefined” is wanted, this step is necessary. Here
densitometer is a must.
The following table shows the numbers and their corresponding descriptions.
No. Description No. Description
1 Add Channel Adjustment Region 2 “Proportion” for modulating, 70 as defautl
3 “Print” 4 “Adjust”
5 “Clear” 6 “Exit”
100 V3.2.0.1
Page for Device Management
101 V3.2.0.1
Page for Device Management
102 V3.2.0.1
FotoCenter Hot Key Table
Preview Mode
Key Description
F1 Switch to small image mode preview
F2 Switch to middle image mode preview
F4 Switch to full image mode preview
Parameter Correction
Key Description
F Increase the parameter by one
D Decrease the parameter by one
T Switch for “ACC”
U Switch for “Clear-up”
1 Correct cyan parameters
2 Correct magenta parameters
3 Correct yellow parameters
4 Correct density parameters
A Correct contrast parameters
W Correct saturation parameters
E Correct sharpness parameters
R Correct repeat count
O Set Gamma channel
G Correct curve
S Correct level
103 V3.2.0.1
FotoCenter Hot Key Table
Function
Key Description
Enter Send images
L Load images
Delete Delete images
Ctrl + S Save images
P Channel
B Clear workspace
X Switch to mode “Batch”
H Add images selected (or focused) to “Batch” mode (tagged with “LINK”)
J Remove images selected (or focused) from “Batch” mode
K Exit “Batch” mode
Page Up Display images of the previous page
Page Down Display images of the next page
Image Status
Key Description
Ctrl + A Select all images
Ctrl + I Cancel the selection of all images
Space Set image “PASS”
Direction-key Change the focus in current page
Navigate Parameters
Key Description
M Include full image
N Fix the size of clip area
104 V3.2.0.1
Mirror Table
Mirror Table
1400x1050 Carrier Mirror List
105 V3.2.0.1
Mirror Table
106 V3.2.0.1