Академический Документы
Профессиональный Документы
Культура Документы
1.2 R.C.C. slab including beams, reinforcement & finishes. Sft. 200 Rs. 50.00 Rs. 10,000.00
1.3 Tile finished floor with base concrete. Sft. 3900 Rs. 28.00 Rs. 109,200.00
1.4 Tile finished floor with-out base concrete. Per Sqft Sft. Rate Required. Rs. 22.00
1.5 Raised floor along all top finishes and base structure. ( All types ) Sft. 1400 Rs. 25.00 Rs. 35,000.00
1.7 Wooden partitions along all finishes / paneling / tile. Sft. 1800 Rs. 30.00 Rs. 54,000.00
1.8 Wooden claddings / boxing / bulkheads along all finishes / paneling. Sft. 4200 Rs. 40.00 Rs. 168,000.00
1.9 Brick cladding with base mortar. Sft. 800 Rs. 20.00 Rs. 16,000.00
1.10 False ceiling along all finishes / frames. ( All types ) Sft. 4500 Rs. 20.00 Rs. 90,000.00
1.11 Masonry walls. ( Including finishes, etc. ) Sft. 2000 Rs. 15.00 Rs. 30,000.00
1.13 Ceramic / porcelain ( Walls ) tiles with base mortar. Sft. 50 Rs. 50.00 Rs. 2,500.00
1.15 Fixed glazing & windows along frames, posts, etc. Sft. 200 Rs. 100.00 Rs. 20,000.00
1.16 Main door along frame. No. 1 Rs. 20,000.00 Rs. 20,000.00
1.17 Internal doors along frames. Nos. 8 Rs. 2,000.00 Rs. 16,000.00
Note:
1)- Slab to be cut with mechanical cutter before hammering down the slab.
2)- Beams and slabs should be properly propped prior to dismantling works.
Providing, fabricating and fixing of stair railing fabricated with paint finish 1" dia 18swg
post, 2" dia 18swg MS pipe handrail welded with post and fixed with stair structure
including approved three coats of enamel paint over two coats of anti rust paint, welding, ID-720, 721. Rft. 75 Rs. 2,800.00 Rs. 210,000.00
grinding, all fixing accessories and arrangements, scaffolding, wastage, etc. Complete in
all respect and as per drawings, details and directions of the Architect / Engineer.
Providing, fabricating and installation of metal structure for 1st floor stock room
comprising of different sections, plates, etc. in required sizes and thickness / gauges (as
mentioned in drawings) including wastage, cutting, continuous welding, grinding,
Kg. 6500 Rs. 350.00 Rs. 2,275,000.00
anchoring, three coats of approved enamel paint over two coats of anti rust paint on all
MS structure, all fixing accessories and arrangements, scaffolding, etc. Complete in all
respect and as per drawing, details and directions of the Architect / Engineer.
Providing, fabricating and installation of metal roof GI corrugated sheet of 20swg over
already made metal structure (Refer item # 2.3) for 1st floor stock room (as mentioned in
drawings) including wastage, minimum 6" overlapping of sheets, cutting, welding,
Sft. 1200 Rs. 550.00 Rs. 660,000.00
grinding, anchoring with metal structure, all fixing accessories and arrangements,
scaffolding, etc. Complete in all respect and as per drawing, details and directions of the
Architect / Engineer.
Providing and laying of brick masonry wall 4.5" ~ 9" thick up to any height, level and
floor using first class burn brick with cement sand jointing mortar ratio 1:5 including
leveling, alignment, scaffolding, tie with existing wall using 1/4" dia steel pins at 2 feet DD-103, 104. Cft. 1050 Rs. 425.00 Rs. 446,250.00
interval height, curing, wastage, all arrangements, etc. Complete in all respect and as
per drawing, details and directions of the Architect / Engineer.
Providing, mixing and applying of anti-termite treatment under floor using the specified
insecticides emulsion "Biflex" or approved equivalent applied as per manufacturer's
Sft. 5200 Rs. 18.00 Rs. 93,600.00
specifications. Complete in all respects and as directed by the Engineer. (Covered area
of building to be measure for this item)
TOTAL OF DIVISION - 03. (CONCRETE, MASONRY & PLASTER WORKS) Rs. 953,850.00
Providing and laying cast in place cement concrete steel trowel finish floor Avg. 2.5"
thick ratio 1:2:4 laid in panels using approved quality (cement, course sand, crush) ID-401 to
4.1.1 Sft. 290 Rs. 130.00 Rs. 37,700.00
including compacting, leveling, curing, wastage, all arrangements, etc. Complete in all 403.
respect and as per drawing, details and directions of the Architect / Engineer.
Providing and laying cast in place cement concrete rough floor Avg. 2.25" thick ratio
1:2:4 laid in panels using approved quality (cement, sand, crush) including compacting, ID-401 to
4.1.2 Sft. 4250 Rs. 115.00 Rs. 488,750.00
leveling, curing, wastage, all arrangements, etc. Complete in all respect and as per 403.
drawing, details and directions of the Architect / Engineer.
Providing and laying cast in place cement concrete rough floor Avg. 1.25" thick ratio
1:2:4 laid in panels using approved quality (cement, sand, crush) including compacting, ID-401 to
4.1.3 Sft. 1450 Rs. 95.00 Rs. 137,750.00
leveling,
leveling curing,
curing wastage,
wastage all arrangements,
arrangements etc.etc Complete in all respect and as per 403.
403
drawing, details and directions of the Architect / Engineer.
Providing and fixing of wooden raised floor structure 3.5" high fabricated with 3/4" thick
marineplex ply over 2" thick partal wood for frames @ 16" c/c including epoxy joint filling,
ID-401, 403. Sft. 30 Rs. 1,500.00 Rs. 45,000.00
solignum treatment, wastage, all fixing accessories and arrangements, etc. Complete in
all respect and as per drawings, details and directions of the Architect / Engineer.
Providing and fixing of wooden raised floor structure 7" high fabricated with 3/4" thick
marineplex ply over 2" thick partal wood for frames @ 16" c/c including epoxy with fine
sand over ply, rubbing of ply to application of epoxy, epoxy jointing, solignum treatment, ID-401, 403. Sft. 250 Rs. 1,500.00 Rs. 375,000.00
wastage, all fixing accessories and arrangements, etc. Complete in all respect and as
per drawings, details and directions of the Architect / Engineer.
4.3.2 CT-2. (Size 12" x 12" = Basic price of tile - Rs. 1,150/- per sq.meter @ Karachi) Sft. 1250 Rs. 425.00 Rs. 531,250.00
4.3.3 CT-3. (Size 12" x 24" = Basic price of tile - Rs. 2,000/- per sq.meter @ Karachi) Sft. 75 Rs. 425.00 Rs. 31,875.00
Providing and fixing of approved silbatta stone tile (Blade cut) size 12" x 48" x 1.5" thick
on floor over already laid rough concrete floor (tiles to be fixed with approved dry bond)
ID-401 to
including dry bond, approved grout, sealer, spacers if required, cutting, curing, cleaning, Sft. 260 Rs. 350.00 Rs. 91,000.00
403.
wastage, all fixing accessories and arrangements, etc. Complete in all respects and as
per drawing, patterns and directions of the Architect / Engineer.
4.5 Carpet Tile. ( CT-5 ) [ 20" x 20" - Cubic Black - Pak Carpet ]
Providing and fixing of approved carpet tile in fitting rooms paste over already laid CC
finished floor (level to be match with outer finished floor) including pasting adhesive,
ID-401. Sft. 50 Rs. 500.00 Rs. 25,000.00
cutting, wastage, etc. Complete in all respects and as per drawing, patterns and
directions of the Architect / Engineer.
4.6 Pre - Polished Marble Tile Floor. ( CT-6 ) [ Basic price with polish - Rs. 350/- per sft. @
Karachi ]
Providing and fixing of approved white marble pre-polished tile size 12" x 24" x 3/4" thick
on floor over already made wooden raised floor structure (tiles to be fixed with approved
ID-401 to
dry bond) including dry bond, approved grout, sealer, cutting, curing, cleaning, wastage, Sft. 260 Rs. 1,275.00 Rs. 331,500.00
403.
all fixing accessories and arrangements, etc. Complete in all respects and as per
drawing, patterns and directions of the Architect / Engineer.
Providing, making and fixing of 4' long x 6" wide x 3/4" thick solid white ash wood panels
as floor over 3/4" thick marine ply fixed on to already laid CC floor including approved
polish with lacquer over transparent sealer, wastage, scaffolding, all fixing accessories Sft. 50 Rs. 4,000.00 Rs. 200,000.00
and arrangements, etc. Complete in all respects and as per drawing, details and
directions of the Architect / Engineer.
Providing, making and fixing of 4' long x 6" wide x 3/4" thick solid red meranti wood
panels as floor over 3/4" thick marine ply fixed on to already laid CC floor including
approved polish with lacquer over transparent sealer, wastage, scaffolding, all fixing Sft. 50 Rs. 2,750.00 Rs. 137,500.00
accessories and arrangements, etc. Complete in all respects and as per drawing, details
and directions of the Architect / Engineer.
Providing, fabricating and fixing of 4" thick full / low height stud partitions up to any
height and floor comprising with 3/4" thick laminated chip boards (both side) over 2" x
2.5" partal wood frame at 24" x 24" center to center including solid rough wood at all
corners, epoxy joint filling, making smooth surface, solignum treatment over wood,
ID-101, 102. Sft. 1170 Rs. 550.00 Rs. 643,500.00
scaffolding, all fixing accessories and arrangements, fixing of frame with structural slab /
beam up to any height, wastage, etc. Complete in all respect and as per drawings,
details and directions of the Architect / Engineer. (This job will be coordinated with
electrical and air-conditioning works)
Providing, fabricating and fixing of wooden cladding over walls, beams, columns &
boxing up to any height, floor and depth comprising with 3/4" thick single side laminated
chip board over 2" x 2" partal wood frame at 24" x 24" center to center including solid
rough wood at all corners, epoxy joint filling, making smooth surface, solignum treatment
over wood, scaffolding, wastage, all fixing accessories and arrangements, fixing of frame ID-101, 102. Sft. 2600 Rs. 550.00 Rs. 1,430,000.00
with walls, structural slab / beam up to any height & depth, fixing arrangement for fixed
glazing, etc. Complete in all respect and as per drawings, details and directions of the
Architect / Engineer. (This job will be coordinated with electrical and air-conditioning
works)
Providing and fixing of 12mm thick approved wood cement board (VIVA Thailand OR
Approved equivalent) water resistant over already installed metal structure (Vertically)
1st Floor
including sheet joint treatment by VIVA, making smooth surface, scaffolding, all fixing
stock room Sft. 680 Rs. 575.00 Rs. 391,000.00
accessories and arrangements, hardware, wastage, etc. Complete in all respect and as
out side.
per drawings, details, manufacturer's specification / instructions and directions of the
Architect / Engineer.
Providing and fixing of 1/8" thick & 3" wide polish finish Malaysian ply with back of 1/2"
thick plain MDF board fixed with partal wood frame over already made dry partitions /
cladding including red meranti wood lipping all around, making grooves, approved polish
ID-706. Sft. 60 Rs. 550.00 Rs. 33,000.00
q over transparent
with lacquer p sealer,, wastage,
g , all fixingg accessories and arrangements,
g ,
etc. Complete in all respect and as per drawings, details and directions of the Architect /
Engineer.
Providing and fixing of wooden trim fabricated with solid polish finish red meranti wood
including making grooves, approved polish with lacquer over transparent sealer, all
fixing accessories and arrangements, wastage, scaffolding, etc. Complete in all respect
and as per drawings, details and directions of the Architect / Engineer.
5.5.1 1/2" x 4". ( Fitting room inside ) ID-706. Rft. 25 Rs. 250.00 Rs. 6,250.00
5.5.2 1/2" x 4" with back of partal wood. ( Fitting room - Top ) ID-706. Rft. 10 Rs. 350.00 Rs. 3,500.00
5.5.3 1/2" x 3" with back of partal wood. ( Fitting room - Sides ) ID-706. Rft. 30 Rs. 350.00 Rs. 10,500.00
5.5.4 3/4" x 1.5". ( Toilet - Top of Tiles ) ID-707. Rft. 45 Rs. 350.00 Rs. 15,750.00
Providing and fixing of wooden trim fabricated with solid polish finish white ash wood
size 1/2" x 2" including making grooves, approved polish with lacquer over transparent
Rft. 350 Rs. 250.00 Rs. 87,500.00
sealer, all fixing accessories and arrangements, wastage, scaffolding, etc. Complete in
all respect and as per drawings, details and directions of the Architect / Engineer.
Providing and fixing of wooden skirting fabricated with solid polish finish wood including
making grooves, approved polish with lacquer over transparent sealer, all fixing
accessories and arrangements, wastage, etc. Complete in all respect and as per
drawings, details & directions of the Architect / Engineer.
5.7.1 1/2" x 2". ( Red Meranti ) ID-706. Rft. 25 Rs. 130.00 Rs. 3,250.00
5.7.3 1/2" x 2". ( White Ash ) Rft. 50 Rs. 225.00 Rs. 11,250.00
5.8 Porcelain Tiles Over Toilet & Pantry Walls. ( Basic price of tile - Rs. 2,000/- per sq.meter @ Karachi )
Providing and fixing of full body porcelain tiles over toilet walls including making
grooves, spacer if required, dry bond / adhesive for fixing of tiles, unsanded grout,
ID-707. Sft. 180 Rs. 650.00 Rs. 117,000.00
cutting, curing, cleaning, hacking / chipping if required, wastage, etc. Complete in all
respects and as per drawing, patterns and directions of the Architect / Engineer.
Providing and fixing of 2" high skirting of cut porcelain tile including cutting, fixing
adhesive, filling of joint, all fixing accessories and arrangements, wastage, etc. Complete
in all respect and as per drawings, details & directions of the Architect / Engineer.
5.9.1 2" High. ( Basic price of tile - Rs. 2,700/- per sq.meter @ Karachi ) Rft. 250 Rs. 525.00 Rs. 131,250.00
ID-401, 402.
5.9.2 2" High. ( Basic price of tile - Rs. 1,150/- per sq.meter @ Karachi ) Rft. 275 Rs. 370.00 Rs. 101,750.00
Providing and fixing of approved fair face brick tiles (Gutka) over already laid rough
plaster up to any height & floor including fixing mortar, steel pins for supporting of gutka
if required, wastage, scaffolding, approved grouting in joints if required, all fixing ID-401, 502. Sft. 700 Rs. 330.00 Rs. 231,000.00
accessories and arrangements, etc. Complete in all respect and as per drawings, details
& directions of the Architect / Engineer.
Providing, making & fixing of main entrance door shutter size 5'-6" x 7'-8" (In two panels)
using solid red meranti wood polish finish, 12mm thick clear tempered glass with 3M
safety film of 170 micron including approved polish with lacquer over transparent sealer,
ID-701. Job. 1 Rs. 590,000.00 Rs. 590,000.00
safety film, floor mounted door closer, hinges, lock, wastage, making smooth surface, all
fixing accessories and arrangements, etc. Complete in all respects and as per drawing,
details & directions of the Architect / Engineer.
Providing, fabricating and installation of comb cut finish door shutter size 2'-3" x 6'-4"
using 3/4" thick marine ply, 3/4" x 3/4" partal wood all around of ply, 3/8" thick red
meranti veneer comb cut finish on both sides, 1/2" thick solid red meranti wood lipping ID-702, 703.
all around including approved hardware (lock, hinges, latch, door stopper, etc.), (Fitting Jobs. 2 Rs. 280,000.00 Rs. 560,000.00
solignum treatment, approved polish with lacquer over transparent sealer, all fixing Room)
accessories and arrangements, wastage, etc. Complete in all respects and as per
drawing, design, details and directions of the Architect / Engineer.
Providing, fabricating and installation of comb cut & formica finish door shutter size 3'-0"
x 7'-10.5" using 3/4" thick marine ply, 3/4" x 3/4" partal wood all around of ply, 3/8" thick
white ash veneer comb cut finish on retail side, 3/8" thick plain MDF with formica finish
on stair lobby side, 1/2" thick solid white ash wood lipping all around including approved ID-702, 703.
Job. 1 Rs. 310,000.00 Rs. 310,000.00
hardware (lock, hinges, latch, door stopper, etc.), solignum treatment, approved polish (Stair Lobby)
with lacquer over transparent sealer, all fixing accessories and arrangements, wastage,
etc. Complete in all respects and as per drawing, design, details and directions of the
Architect / Engineer.
Providing, fabricating and installation of formica finish door shutter using 3/4" thick
marine ply, 3/4" x 3/4" partal wood all around of ply, 3/8" thick plain MDF with formica
finish on both sides, 1/2" thick solid white ash wood lipping all around including
approved hardware (lock, hinges, latch, door stopper, etc.), solignum treatment, ID-702, 703.
approved polish with lacquer over transparent sealer, all fixing accessories and
arrangements, wastage, etc. Complete in all respects and as per drawing, design,
details and directions of the Architect / Engineer.
6.1.4.1 Door Shutter. ( D2 ) [ 2'-6" x 6'-10.5" ] Jobs. 2 Rs. 55,000.00 Rs. 110,000.00
6.1.4.2 Door Shutter. ( D3 ) [ 2'-3" x 6'-10.5" ] Jobs. 6 Rs. 45,000.00 Rs. 270,000.00
Providing,
Providing fabricating and installation of DB shutter fabricated with solid red meranti
polish finish wood including frame, approved hardware (hinges, latch, stopper),
approved polish with lacquer over transparent sealer, all fixing accessories and ID-704. Sft. 30 Rs. 380.00 Rs. 11,400.00
arrangements, etc. Complete in all respects and as per drawing, design, details and
directions of the Architect / Engineer.
Providing, fabricating and fixing of door frame made with 2" x 4" solid white ash wood
back with 1/4" thick commercial ply shim including sealant, solignum treatment,
6.2.1 approved polish with lacquer over transparent sealer, all fixing accessories and ID-702, 703. Rft. 135 Rs. 425.00 Rs. 57,375.00
arrangements, etc. Complete in all respects and as per drawing, details and directions of
the Architect / Engineer.
Providing, fabricating and fixing of door frame (Sides) size 2" x 4.5" made with solid red
meranti wood with 1/4" thick commercial ply shim including sealant, solignum treatment,
6.2.2 approved polish with lacquer over transparent sealer, wastage, all fixing accessories ID-706. Rft. 30 Rs. 425.00 Rs. 12,750.00
and arrangements, etc. Complete in all respects and as per drawing, details and
directions of the Architect / Engineer.
Providing, fabricating and fixing of door (top) panel size 1-1/2" x 4.5" made with 1/8"
thick teak MDF over 1/2" thick MDF board, 1-1/2" x 1/2" solid red meranti wood edges
6.2.3 including approved polish with lacquer over transparent sealer, all fixing accessories ID-706. Rft. 5 Rs. 490.00 Rs. 2,450.00
and arrangements, wastage, etc. Complete in all respects and as per drawing, details
and directions of the Architect / Engineer.
Providing, fabricating and fixing of fixed glass frame made with 4" x 12" solid red meranti
wood including sealant, approved polish with lacquer over transparent sealer, all fixing
6.2.4 ID-701. Rft. 60 Rs. 425.00 Rs. 25,500.00
accessories and arrangements, etc. Complete in all respects and as per drawing, details
and directions of the Architect / Engineer.
Providing and fixing of 12mm thick tempered glass with 3M safety film of 170 micron to
be fixed in already installed wooden frame (Refer item # 6.2.4) including safety film, butt
joint, water proof sealant, wastage, scaffolding, all fixing accessories and arrangements, ID-701. Sft. 85 Rs. 2,200.00 Rs. 187,000.00
etc. Complete in all respects and as per drawing, details and directions of the Architect /
Engineer.
Providing and installation of wooden ceiling fabricated with 3/4" thick laminated chip
board with concealed framing of 2" x 2" partal wood at 24" x 24" center to center hang
from RCC slab / beams at any height including solid rough wood at all corners, epoxy
ID-301 to
jointing, solignum treatment, making smooth surface, cutting for light fixtures, all fixing Sft. 4600 Rs. 525.00 Rs. 2,415,000.00
303.
accessories and arrangements, scaffolding, wastages, etc. Complete in all respects and
as per drawing, design and directions of the Architect / Engineer. (This job will be
coordinated with electrical and air-conditioning works)
Providing and installation of fabric ceiling in waves shape using approved grey PVC
fabric ( 650 gram per sq.meter of Obekan supplied by Innovators ) with framing of paint
finish 1.5" dia 18swg MS pipe @ 48" x 48" c/c rested on already installed wooden beam ID-301 to
Sft. 650 Rs. 350.00 Rs. 227,500.00
size 6" x 10" at any height including welding, grinding, painting on complete MS 303.
structure, all fixing accessories and arrangements, scaffolding, wastages, etc. Complete
in all respects and as per drawing, design and directions of the Architect / Engineer.
Providing, fabricating and installation of wooden support for LED smart panel size 2" x 2"
made from red meranti wood rest / fixed over partition walls including MS paint finish
angle support, approved polish with lacquer over transparent sealer, scaffolding, all ID-706. Rft. 40 Rs. 225.00 Rs. 9,000.00
fixing accessories and arrangements, wastages, etc. Complete in all respect and as per
drawings, details & directions of the Architect / Engineer.
Providing, making and installation of polish finish wooden beams (for track light)
fabricated with solid polish finish red meranti wood size 4" x 2" including making grooves
for track light, approved polish with lacquer over transparent sealer, hang with 8mm dia
ID-301 to
threaded shaft on to slab, 3" x 1" x 3mm thick MS plate weld with shaft and fixed with Rft. 375 Rs. 330.00 Rs. 123,750.00
303.
wooden beam, anchoring, all fixing accessories and arrangements, scaffolding,
wastages, etc. Complete in all respects and as per drawing, design and directions of the
Architect
A hit t / E Engineer.
i (This job
(Thi j b will
ill bbe coordinated
di t d with
ith electrical
l t i l works)
k )
Providing, making and installation of polish finish wooden beams fabricated with solid
polish finish red meranti wood size 4" x 6" including approved polish with lacquer over
transparent sealer, hang with 12mm dia threaded shaft on to slab, 6" x 2" x 3mm thick
ID-301. Rft. 220 Rs. 330.00 Rs. 72,600.00
MS plate weld with shaft and fixed with wooden beam, anchoring, all fixing accessories
and arrangements, scaffolding, wastages, etc. Complete in all respects and as per
drawing, design and directions of the Architect / Engineer.
Providing, fabricating and installation of wooden rafters made from red meranti wood
size 2" x 3" fixed on to already installed wooden beam (Refer item # 7.5) including
ID-301, 303.
approved polish with lacquer over transparent sealer, scaffolding, fixing arrangement for Rft. 425 Rs. 395.00 Rs. 167,875.00
(Detail - 2)
LED smart panel, all fixing accessories and arrangements, wastages, etc. Complete in
all respect and as per drawings, details & directions of the Architect / Engineer.
Providing and installation of polish finish wooden beam using 3mm thick Malaysian ply
fixed over 16mm thick laminated chip board with concealed framing of MS tube size
1"x2"x18swg @ 24" c/c hang hang with 12mm dia threaded shaft on to slab / beams up
to any height including polish with lacquer over transparent sealer, 6" x 2" x 3mm thick
ID-301.
MS plate weld with shaft and fixed with wooden beam, epoxy jointing, making smooth Rft. 200 Rs. 330.00 Rs. 66,000.00
(Detail - 01)
surface, fixing arrangement for track light, welding, grinding, two coats of anti rust paint,
all fixing accessories and arrangements, scaffolding, wastages, etc. Complete in all
respects and as per drawing, design and directions of the Architect / Engineer. (This job
will be coordinated with electrical and air-conditioning works)
Providing, fabricating and placing of cash counter 12'-9" wide fabricated with partal
wood for framing, 3/4" thick laminated MDF board with pvc lipping, 1/2" thick red meranti
wood planks polish finish over 1/2" thick MDF board, 1/8" thick polish finish Malaysian
ply over laminated MDF (Out sides), 1/4" thick commercial ply polish finish, 3/8" thick
approved solid acrylic surface (Corian / LG) over MDF board / wood, stainless steel
ID-801. Set. 1 Rs. 485,000.00 Rs. 485,000.00
brackets in drawers including making grooves, approved polish with lacquer over
transparent sealer, solignum treatment over wood, approved imported hardwares (locks,
runners, handles, catchers, etc.), epoxy joint, all fixing accessories and arrangements,
wastage, etc. Complete in all respects and as per drawing, details and directions of the
Architect / Engineer.
Providing, fabricating and placing of back counter 17'-4" wide fabricated with partal
wood for framing, laminated MDF board with pvc lipping, 3/8" thick approved solid
acrylic surface (Corian / LG) over MDF board, 1/2" thick polish finish red meranti wood
on edges including making grooves, approved polish with lacquer over transparent ID-802. Set. 1 Rs. 775,000.00 Rs. 775,000.00
sealer, solignum treatment over wood, all fixing accessories and arrangements,
wastage, etc. Complete in all respects and as per drawing, details and directions of the
Architect / Engineer.
8.3 Un-Stitched Display - Type "A", "B", "E". ( F-3, F-4, F-12 )
Providing, fabricating and fixing of red meranti wood vertical post size 3.5" x 3.5" fixed
with approved customized metal powder coated adjustable supports (floor, wall)
including fixing of owner supplied channels by visplay, making grooves, approved polish
ID-803, 806. Rft. 300 Rs. 360.00 Rs. 108,000.00
with lacquer over transparent sealer, wastage, all fixing accessories and arrangements,
etc. Complete in all respect and as per drawings, details and directions of the Architect /
Engineer.
Providing, fabricating and fixing of red meranti wood vertical post size 3.5" x 3.5" tie on
floor and beam / slab including fixing of owner supplied channels by visplay both sides,
making grooves, approved polish with lacquer over transparent sealer, all fixing
ID-803, 806. Rft. 90 Rs. 360.00 Rs. 32,400.00
accessories and arrangements, MS base plate fixed with anchor bolts, 1.5" x 1.5" paint
finish 16swg MS tube weld with base plates, wastages, etc. Complete in all respect and
as pe
per ddrawings,
a gs, deta
detailss aandd ddirections
ect o s oof tthee Architect
c tect / Engineer.
g ee
Providing, fabricating and fixing of wooden rods fabricated with solid red meranti wood
size 1.5" x 1.5" including fixing of owner supplied brackets by visplay, approved polish
with lacquer over transparent sealer, all fixing accessories and arrangements, wastages, ID-803, 806. Rft. 1015 Rs. 290.00 Rs. 294,350.00
etc. Complete in all respect and as per drawings, details & directions of the Architect /
Engineer.
Providing, fabricating and fixing of bottom panel fabricated with 1/8" thick polish finish
Malaysian ply over 1/2" thick MDF board with 1/2" x 2" solid polish finish red meranti
wood on edge and partal wood base frame including making grooves, approved polish
ID-803, 806.
with lacquer over transparent sealer, solignum treatment over wood, all fixing
accessories and arrangements, wastages, etc. Complete in all respect and as per
drawings, details & directions of the Architect / Engineer.
8.4 Pret. Display. ( F-5, F-6, F-14 ) [ Type - Bulk Head & Post ]
Providing and fixing of laminate panels (Kaindi 37813 Oak Severina by Pak Carpet)
fixed to aluminum section with epoxy including partal wood back frame size 2" x 2" @
24" c/c both way, fixing of owner supplied visplay channels, PVC clips fixed with GMSA ID-807, 812,
Sft. 400 Rs. 1,450.00 Rs. 580,000.00
glue @ 18" c/c, making grooves, adhesive, solignum treatment, all fixing accessories 818, 819.
and arrangements, scaffolding, wastage, etc. Complete in all respect and as per
drawings, details & directions of the Architect / Engineer.
Providing and fixing of 33" x 33" x 11" thick polish finish solid ash wood L shape on edges of
pret. display over already installed wooden bulkhead / boxing including making grooves,
ID-807, 812,
approved polish with lacquer over transparent sealer, all fixing accessories and Rft. 85 Rs. 380.00 Rs. 32,300.00
818, 819.
arrangements, wastage, etc. Complete in all respect and as per drawings, details and
directions of the Architect / Engineer.
Providing, fabricating and fixing of wooden shelf 16" deep fabricated with 1/8" thick
polish finish oak MDF both side over 1/2" thick MDF board with 3/8" thick solid polish
finish white ash wood on edges and partal wood frame including fixing of owner supplied
ID-807, 812,
shelf support by visplay, making grooves, approved polish with lacquer over transparent Rft. 130 Rs. 550.00 Rs. 71,500.00
818, 819.
sealer, solignum treatment, wastage, all fixing accessories and arrangements, etc.
Complete in all respect and as per drawings, details and directions of the Architect /
Engineer.
Providing, fabricating and fixing of bottom panel 16" deep fabricated with 1/8" thick
polish finish oak MDF over 1/2" thick MDF board with 1" thick solid polish finish white
ash wood on front edge, 3/8" thick solid polish white ash wood on other three sides and
ID-807, 812,
partal wood base frame including making grooves, approved polish with lacquer over
818, 819.
transparent sealer, solignum treatment, all fixing accessories and arrangements,
wastage, etc. Complete in all respect and as per drawings, details & directions of the
Architect / Engineer.
Providing, making and fixing of hangers using 1" x 1/2" solid SS tube 16swg (Grade 304)
fixed on to already installed shelf including welding, grinding, polishing, cuts for cloth ID-807, 812,
Nos. 25 1800 45000
hangers, all fixing accessories and arrangements, wastages, etc. Complete in all respect 818, 819.
and as per drawings, details & directions of the Architect / Engineer.
Providing, fabricating and fixing of white ash wood vertical post size 3.5" x 3.5" fixed on
to wall & floor with approved customized metal powder coated adjustable supports
(Bottom & wall) including fixing of owner supplied channels by visplay, making grooves, ID-807, 812,
Rft. 65 Rs. 360.00 Rs. 23,400.00
approved polish with lacquer over transparent sealer, wastage, all fixing accessories 818, 819.
and arrangements, etc. Complete in all respect and as per drawings, details and
directions of the Architect / Engineer.
Engineer
Providing, fabricating and fixing of white ash wood top support size 2" x 3.5" including
approved polish with lacquer over transparent sealer, all fixing accessories and ID-807, 812,
Rft. 85 Rs. 410.00 Rs. 34,850.00
arrangements, wastage, scaffolding, etc. Complete in all respect and as per drawings, 818, 819.
details and directions of the Architect / Engineer.
Providing, fabricating and fixing of white ash wood top support size 2" x 3.5" including
approved polish with lacquer over transparent sealer, all fixing accessories and
ID-813. Rft. 6 Rs. 340.00 Rs. 2,040.00
arrangements, wastage, scaffolding, etc. Complete in all respect and as per drawings,
details and directions of the Architect / Engineer.
Providing, fabricating and placing of mannequin display using partal wood for frame,
16mm thick laminated MDF board, 1/8" thick oak MDF, white ash wood lipping all
around including approved polish with lacquer over transparent sealer, solignum ID-822.
treatment, all fixing accessories and arrangements, wastages, etc. Complete in all
respect and as per drawings, details and directions of the Architect / Engineer.
8.6.1 24" x 24" x 24" high. Nos. 9 Rs. 14,000.00 Rs. 126,000.00
8.6.2 24" x 24" x 18" high. Nos. 9 Rs. 12,000.00 Rs. 108,000.00
8.6.3 24" x 24" x 12" high. Nos. 9 Rs. 10,000.00 Rs. 90,000.00
Providing and fabricating of trunk fabricated with 3/4" & 1/2" thick partal wood planks,
MS powder coated frame, approved metal handles, PVC heavyy dutyy casters with lock
including making grooves, approved polish with lacquer over transparent sealer,
ID-813, 814. Nos. 12 Rs. 35,000.00 Rs. 420,000.00
powder coating, hardwares, all fixing accessories and arrangements, wastage, etc.
Complete in all respects and as per drawing, details and directions of the Architect /
Engineer.
Providing and installation of 5mm thick approved imported mirror pasted over 3mm thick
commercial ply fixed on to wooden wall / claddings including fixing adhesive, wooden
ID-816. Sft. 70 Rs. 430.00 Rs. 30,100.00
lipping, all fixing accessories and arrangements, wastage, etc. Complete in all respects
and as per drawing, details and directions of the Architect / Engineer.
Providing and fabricating of display table fabricated with 1.5" thick solid white ash wood
polish finish planks, partal wood, MS powder coated complete frame including making
grooves, approved polish with lacquer over transparent sealer, powder coating, all fixing ID-817. Nos. 4 Rs. 85,000.00 Rs. 340,000.00
accessories and arrangements, wastage, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing, fabricating and fixing of un-stitched display - luxury size 4'-6" wide x 7'-6" high
x 13.5" deep fabricated with black granite over MDF base, solid sheesham wood strips &
rods, MS "T" bars, matt polish finish brass pipe connectors including approved polish
ID-820. Nos. 5 Rs. 110,000.00 Rs. 550,000.00
with lacquer over transparent sealer, customized adjustable support powder coated, all
fixing accessories and arrangements, wastage, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing, fabricating and placing of wooden bench size 6'-0" x 1'-3" x 1'-6" fabricated
with 3" thick polish finish solid wood planks fixed with MS powder coated frame including
approved polish with lacquer over transparent sealer, welding, grinding, powder coating, ID-823.
all fixing accessories and arrangements, wastages, etc. Complete in all respect and as
per drawings, details and directions of the Architect / Engineer.
Providing, fabricating and placing of metal shoe display size 48" x 18" x 24" high
fabricated with 12swg MS sheet white powder coated including powder coating, cutting,
8.12.1 ID-821. Nos. 2 Rs. 80,000.00 Rs. 160,000.00
bending, gliders, all arrangements, wastage, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing, fabricating and placing of wooden shoe display size 48" x 18" x 21" fabricated
with partal wood gliders, 16mm thick laminated MDF board, 1/8" thick oak MDF, white
ash wood lipping all around including approved polish with lacquer over transparent
8.12.2 ID-821. Nos. 2 Rs. 75,000.00 Rs. 150,000.00
sealer, solignum treatment, all fixing accessories and arrangements, wastages, etc.
Complete in all respect and as per drawings, details and directions of the Architect /
Engineer.
8.13 Shoe Box. ( F-17 )
Providing, fabricating and placing of wooden shoe box fabricated with partal wood
gliders, 3/4" thick polish finish malaysion ply including approved polish with lacquer over
transparent sealer, solignum treatment, all fixing accessories and arrangements, ID-821. Nos. 12
wastages, etc. Complete in all respect and as per drawings, details and directions of the
Architect / Engineer.
Providing, fabricating and installation of accessories display size 11'-2" x 8'-0" fabricated
with polish finish red meranti wood, fixing of aluminum profile (supply by others), mirror
with ash wood frame, shelves of 3mm malaysian ply over 1/2" thick MDF board + red
meranti wood lipping + partal wood framing including fixing arrangements of aluminum
ID-824. Job. 1 Rs. 150,000.00 Rs. 150,000.00
profile, fixing arrangements of wooden shelves, approved polish with lacquer over
transparent sealer, customized metal powder coated support brackets, solignum
treatment, all accessories and arrangements, wastage, etc. Complete in all respect and
as per drawings, details and directions of the Architect / Engineer.
Providing, fabricating and placing of stool size 1'-3" x 1'-3" x 1'-6" fabricated with polish
finish wood top made with 1/8" thick malaysion ply over 16mm thick laminated chip
board and ppartal wood framing, g, ppowder coated MS base frame includingg approved pp
ID-820.
ID 820 Nos.
N 4 Rs.
R 14,000.00
14 000 00 Rs.
R 56,000.00
56 000 00
polish with lacquer over transparent sealer, welding, grinding, powder coating, all fixing
accessories and arrangements, wastages, etc. Complete in all respect and as per
drawings, details and directions of the Architect / Engineer.
8.16 Planter.
Providing, fabricating and placing of planter fabricated with polish finish red meranti solid
wood strips fixed over MS powder coated finish frame including approved polish with
lacquer over transparent sealer, welding, grinding, painting, all fixing accessories and ID-711.
arrangements, wastages, etc. Complete in all respect and as per drawings, details and
directions of the Architect / Engineer.
8.16.1 36" x 18" x 27" high. No. 1 Rs. 28,000.00 Rs. 28,000.00
8.16.2 48" x 20" x 30" high. No. 1 Rs. 45,000.00 Rs. 45,000.00
8.16.3 14" x 14" x 14" high. No. 1 Rs. 22,000.00 Rs. 22,000.00
8.16.4 16" x 16" x 18" high. No. 1 Rs. 24,000.00 Rs. 24,000.00
Providing, fabricating and fixing of metal planter racks fabricated with 12swg MS sheet
black powder coated including powder coating, cutting, bending, welding, grinding, all
ID-707. Rft. 95 Rs. 2,000.00 Rs. 190,000.00
fixing accessories and arrangements, wastage, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing, fabricating and fixing of metal planter wall base fabricated with 12swg MS
sheet black powder coated including powder coating, cutting, bending, welding,
ID-707. Rft. 20 Rs. 9,500.00 Rs. 190,000.00
grinding, all fixing accessories and arrangements, wastage, etc. Complete in all respects
and as per drawing, details and directions of the Architect / Engineer.
8.19 Mirrors.
8.19.2 Toilet.
Providing and installation of 5mm thick imported mirror pasted over 1/4" thick
commercial ply including adhesive, 1.5" wide solid polish finish red meranti wood edge,
ID-707. Sft. 25 Rs. 425.00 Rs. 10,625.00
all fixing accessories and arrangements, wastage, etc. Complete in all respects and as
per drawing, details and directions of the Architect / Engineer.
8.20 Pantry.
Providing, fabricating and fixing of base cabinet fabricated with partal wood for framing,
3/4" thick boticina marble top over 1/2" thick marine ply, 3/4" thick laminated MDF board
for back, shutters, base, dividers, etc. with pvc lipping including making grooves,
approved polish, SS sink bowl, sink mixture, solignum treatment, approved imported Rft. 7
hardwares (locks, catchers, handles, hinges, etc.), CC base, all fixing accessories and
arrangements, wastage, etc. Complete in all respects and as per drawing, details and
directions of the Architect / Engineer.
Providing, fabricating and fixing of hanging cabinet fabricated with partal wood for
framing, 3/4" thick laminated MDF board for top, back, shutters, base, dividers, etc. with
pvc lipping polish finish including making grooves, approved polish, solignum treatment,
Rft. 7
approved imported hardwares (locks, catchers, handles, hinges, etc.), all fixing
accessories and arrangements, wastage, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing, fabricating and fixing of lunch counter fabricated 3/4" thick boticina marble top
over 1/2" thick marine ply including MS paint finish base, all fixing accessories and
Rft. 6
arrangements, wastage, etc. Complete in all respects and as per drawing, details and
directions of the Architect / Engineer.
Providing and placing of metal storage racks size 44.5" wide x 96" high x 17" deep
fabricated with metal shelves (7 nos) of 1mm thick galvanized sheets, vertical legs (4
ID-102. Nos. 40
nos) of 2mm thick slotted angle paint finish including all fixing accessories and
arrangements, etc. Complete in all respect and directions of the Architect / Engineer.
Providing and placing of metal staff lockers size 36" x 72" x 18" (Six lockers in one unit)
fabricated with 22swg metal sheet, spray paint finish including all accessories and ID-102. Nos. 4
arrangements, etc. Complete in all respect and directions of the Architect / Engineer.
9.1 Paint.
Providing and applying three coats of matt enamel paint over MDF plain board /
plastered surfaces / wherever required including applying a coat of good quality primer,
9.1.1 filling and preparation of smooth finish base surface prior to applying paint, scaffolding, Sft. 2500 Rs. 120.00 Rs. 300,000.00
etc. Complete in all respects and as per drawings & directions of the Architect /
Engineer.
Providing and applying three coats of matt enamel paint over laminated boards including
9.1.2 filling and preparation of smooth finish surface prior to applying paint, scaffolding, etc. Sft. 11000 Rs. 120.00 Rs. 1,320,000.00
Complete in all respects and as per drawings & directions of the Architect / Engineer.
Chiseling / removing
remo ing of existing
e isting external
e ternal plaster including
incl ding removing
remo ing of debris from site
up to any lead and lift, scaffolding, cleaning of site, etc. Complete in all respects and as AB-106. Sft. 300 150 Rs. 45,000.00
per directions of the Architect / Engineer.
10.1.2.2 Over wall along fixed glazing. Job. 1 20000 Rs. 20,000.00
Removing of existing glass shade along ribs including removing of debris from site up to
any lead and lift, scaffolding, cleaning of site, etc. Complete in all respects and as per AB-106. Job. 1
directions of the Architect / Engineer.
Dismantling of reinforced cement concrete along steel and finishes including removing
of debris from site up to any lead and lift, scaffolding, cleaning of site, etc. Complete in AB-106. Cft. 50 400 Rs. 20,000.00
all respects and as per directions of the Architect / Engineer.
Providing and laying cast in place reinforced cement concrete for slab, beam OR
wherever required ratio 1:2:4 using approved quality (cement, sand, crush) including
reinforcement (steel), smooth finished formwork and its removal, compacting, vibrating, ID-601. Cft. 100
curing, wastage, all arrangements, etc. Complete in all respect and as per drawing,
details and directions of the Architect / Engineer.
Providing and laying of brick masonry 9" thick up to any height using first class burn
brick with cement sand jointing mortar ratio 1:5 including leveling, alignment, curing,
ID-601. Cft. 150 Rs. 425.00 Rs. 63,750.00
wastage, all arrangements, etc. Complete in all respect and as per drawing, details and
directions of the Architect / Engineer.
Providing and laying 1" thick plaster (Minimum 5/8" thick rough + 3/8" thick texture
surface) as per approved ratio and shade on external surfaces up to any height, level
and floor including 6" wide approved MS wire mesh between RRC & masonry / old &
new masonry joints, making edges (curves, chamfered, round, etc.), smooth finished in ID-601. Sft. 400 Rs. 300.00 Rs. 120,000.00
line, level, plumb, curing, scaffolding, hacking / chipping of existing surface for bonding
where necessary, wastage, all arrangements, etc. Complete in all respects and as per
drawing, details and directions of the Architect / Engineer.
Providing and laying minimum 3/4" thick plain cement sand plaster (ratio 1:5) on walls,
beams up to any height including minimum 6" wide approved MS wire mesh between
RRC & masonry / old & new masonry joints, making edges (curves, chamfered, round,
ID-601. Sft. 650 Rs. 80.00 Rs. 52,000.00
etc.), smooth finished in line, level, plumb, curing, scaffolding, hacking / chipping of
existing surface for bonding where necessary, wastage, all arrangements, etc. Complete
in all respects and as per drawing, details and directions of the Architect / Engineer.
Providing and laying water proof 3mm thick sheet membrane (Hi-Grip) with bitumen and
primer coat over existing screed including removing excess material, clean of all
surfaces of adjacent works required for the fixing of sheet, wastage, etc. Complete in all ID-102. Sft. 4000 Rs. 150.00 Rs. 600,000.00
respect and laying as per manufacturer specification and directions of the Architect /
Project Manager.
Providing and laying water proofing of roof by two coats of master seal 550 (BASF)
including cleaning and chipping of surface, removing excess material, wastage, etc.
ID-102. Sft. 80
Complete in all respect and applying as per manufacturer specification and directions of
the Architect / Project Manager.
10.7.1 Floor.
Providing and fixing of approved silbatta stone tile (Blade cut) size 12" x 48" x 1.5" thick
on floor over already laid rough concrete floor (tiles to be fixed with approved dry bond)
including dry bond, approved grout, sealer, spacers if required, cutting, curing, cleaning, ID-401, 403. Sft. 100 Rs. 550.00 Rs. 55,000.00
wastage, all fixing accessories and arrangements, etc. Complete in all respects and as
per drawing, patterns and directions of the Architect / Engineer.
10.7.2 Steps.
Providing and fixing of approved silbatta stone tile (Blade cut) size 12" x 48" x 1.5" thick
on steps over already laid rough concrete floor (tiles to be fixed with approved dry bond)
including making nosing, dry bond, approved grout, sealer, cutting, curing, cleaning, ID-401, 403. Sft. 45 Rs. 550.00 Rs. 24,750.00
wastage, all fixing accessories and arrangements, etc. Complete in all respects and as
per drawing, patterns and directions of the Architect / Engineer.
Providing and fixing new wood screen up to any height using red meranti wood strips
fixed on already plastered surface including approved polish with lacquer over
transparent sealer, scaffolding, wastage, all fixing accessories and arrangements, etc. ID-601. Sft. 220
Complete in all respects and as per drawing, details & directions of the Architect /
Engineer.
10.9 MS Light Box / Bulkhead. (Size 24" x 6")
Providing, fabricating and fixing MS sheet box / bulkhead on top of parapet wall size 24"
x 6" fabricate with 14 SWG MS bended sheet including MS frame, wastage, light cutting,
continuous welding, grinding, anchoring, approved enamel paint three coats over 2
ID-602. Rft. 45
coats of anti corrosive paint, all fixing accessories and arrangements, scaffolding, etc.
Complete in all respect and as per drawings, details & directions of the Architect /
Engineer.
10.10
10 10 Signage.
Signage
Providing, fabricating and fixing of signage with logo with fingers in English using 1/2"
thick solid acrylic (corian) cut letters to be fixed over external elevation screen including
ID-602. Job. 1 Rs. 650,000.00 Rs. 650,000.00
all fixing accessories and arrangements, wastages, scaffolding, finishes, etc. Complete
in all respect and as per drawings, details and directions of the Architect / Engineer.
10.11 Paint.
Providing and applying three coats of weather shield (water proof) paint over plastered
surface external walls including wastages, scaffolding, etc. Complete in all respects and Sft. 300 Rs. 220.00 Rs. 66,000.00
as per drawings & directions of the Architect / Engineer.
11.1 Water Closet. (Western Type) [ Porta - Basic price Rs. 15,000.00 ]
Providing and installation of complete set of approved western type white vitreous water
closet including thimble, traps C.P. brass stop cork, inlet and outlet connections, making
DWV-101 to
cuts holes in walls & floors and its repair, all fixing accessories and arrangements, etc. Nos. 2 Rs. 30,000.00 Rs. 60,000.00
103.
Complete in all respect as per drawings, specifications and directions of the Architect /
Engineer.
11.2 Wash Basin. [ Porta - Basic price Rs. 7,000.00 ]
Providing and installation of complete set of approved hand wash basin under counter
top including PVC bottle trap, flexible connections, C.P. brass waste, making cuts holes DWV-101 to
Nos. 2 Rs. 15,000.00 Rs. 30,000.00
in walls & floors and its repair, all fixing accessories and arrangements, etc. Complete in 103.
all respect as per drawings, specifications and directions of the Architect / Engineer.
Providing & installation of the following approved toilet fittings & accessories. Complete DWV-101 to
in all respect and as per directions of the Architect / Engineer. 103.
11.3.1 Basin mixture. [ Basic price Rs. 5,000.00 ] Nos. 2 Rs. 12,500.00 Rs. 25,000.00
11.3.2 Double bib cock with shower. [ Basic price Rs. 3,500.00 ] Nos. 2 Rs. 8,500.00 Rs. 17,000.00
11.3.3 Tee stop cock. [ Basic price Rs. 800.00 ] Nos. 5 Rs. 3,500.00 Rs. 17,500.00
Providing and laying of following PPRC water supply pipes for hot and cold water supply
system including all required fittings and accessories, cutting in walls and floor for DWV-101 to
Rs. -
embedding the pipes and its repair, etc. Complete in all respects and as per 103.
manufacturer instructions and directions of the Architect / Engineer.
Providing and laying of following Polypropylene soil and waste pipe including all
required fittings and accessories, joints, junctions, making openings in RCC / Block
DWV-101 to
masonry wall for embedding the pipes and its repair, dismantling of floor, excavation Rs. -
103.
with back filling, floor repair, etc. Complete in all respects and as manufacturer
instructions and directions of the Architect / Engineer.
Providing & installation of the following approved brass body gate valves (Kitz) with
Rs. -
union. Complete in all respect and as per directions of the Architect / Engineer.
Providing and installation of complete floor drain including all required fittings and
DWV-101 to
accessories, etc. Complete in all respects and as per manufacturer instruction and Nos. 3 Rs. 2,450.00 Rs. 7,350.00
103.
directions of the Architect / Engineer.
Providing and constructing of complete manhole inner size 21" x 21" including 9" thick
masonry, 1/2" thick water proof plaster (in & out side), benching 1:2:4, 6" thick concrete
bed ratio 1:4:8, 3" thick RCC slab, 18" x 18" CI cover with MS "L" section, cutting of floor,
DWV-02 Nos. 3 Rs. 14,800.00 Rs. 44,400.00
excavation, pipe connection, curing, cutting, wastage, all required accessories and
arrangements, etc. Complete in all respects and as per drawing, details and directions of
the Architect / Engineer.
IMPORTANT NOTES:
1- All prices should be quoted in “Pak. Rs." and inclusive of all taxes.
2- All quantities are estimated and may vary on final completion of the respective works. Actual work done quantity should be measure for billing.
3- Abbreviations used in the Bill of Quantities are defined as follows:
Sft. = Square Feet. (Length x height / width)