Академический Документы
Профессиональный Документы
Культура Документы
This catalogue is composed by 5 thematic sections which illustrate the testing equipment according to the textiles to be
tested. More detailed information are available in specific depliant that can be down-loaded from our web site or requested
to our sales department.
If the instrument of your interest is not available in this catalogue, you are kindly requested to contact us directly.
Pictures and information about the instruments are merely indicative. Mesdan reserves the rights to bring changes in the instruments at any time.
Introduction
MESDAN was founded by Cav.Daniele Messa in Beginning in the nineties, Mesdan became
1952 based in Salò as a manufacturing company established in the Laboratory equipment field and
specialised in the production of textile knotters. In made commercial alliances with the most important
the sixties, the company became a qualified mechanic companies in this sector.
industry which, under the creative impulse of Pietro
Messa developed a commercial structure which By the acquisition of Osvaldo Fessia's Omac SNC
spread throughout the world to reach the main textile company, specialists in the production of Lab
markets. equipment for the control of yarns and fabrics,
Mesdan opens its new department known as
In the eighties, Renato Zanca (successor to Pietro MESDAN-LAB which is now producing and
Messa as Managing Director) leads the company to marketing a huge range of equipment for the analysis
the realisation of an innovative range of splicing of textile material and offers qualified customer
devices, soon becoming internationally recognisable assistance including the planning of complete
by the trademarks of "Jointair" and "Aquasplicer”. laboratories and equipment certification.
Moreover, thanks to the world leadership attained
by the company in the production of yarn joining MESDAN-LAB products are built in compliance with
devices and to its 40 years of experience in the textile International Standards and distinguish for the high
field, Mr. Zanca decided to diversify the company quality standard.
activity by entering the business of textile laboratory
equipment to meet the growing demand in the market Specialised sales & service centres in more than 70
for Quality control and guarantee. different countries can provide qualified after-sales
assistance and custom-made technical solutions.
MESDAN is member of
In 2004 MESDAN obtained from Det Norske Veritas (DNV) he certifications for the Quality Management System
in conformity to UNI EN ISO 9001:2000 standard and for the Environmental Management System of its
manufacturing site in conformity to UNI EN ISO 14001:1996 standard with validity for design, manufacture
and calibration of textile laboratory instruments.
Since then, MESDAN has successfully undergone through the periodical audits of the Certifying Body and
the recent complete re-assessment of Its Quality systems.
Calibration certificate
MESDAN LAB can provide our instruments with calibration certificates for those customers complying with
ISO 9000. MESDAN-LAB can also offer contractual calibration service for complete laboratory (available only
in some countries
MESDAN S.p.A.
Fibres
Pressley - Code 231A p. 2
Stelolab - Code 231B
Torsion balance - Code 259
Fibre TensoLab - Code 331A p. 3
Double comb sorter - Code 230A
Classifiber type W - Code 330A
Micronaire - Code 199B
Air-Flow - Code 272B p. 4
Binocular Microscope 1000X - Code 191H
Microtome - Code 256A
Fibre Microscope kit - Code 250.325
MicroLab - Code 250E p. 5
Top-Lab - Code 328A p. 6
Trash Analyser - Code 281C
Raw Cotton Selector - Code 3282
NATI - Neps and Trash Indicator - Code 328A p. 7
Electronic wrap reel for slivers and rovings - Code 254A -254B p. 8
Manual wrap reel for slivers and rovings - Code 159A -159B
Oil extraction apparatus - Code 273B
Climatest - Code 1722 p. 9
Calibration cottons
Melting Point Apparatus - Code 339C
FIBRES
Pressley - Code 231A
An equipment to determine the resistance of cotton fibres.
It is fitted with clamps with 0” and 1/8’’ distance.
The use of Pressley requires a torsion balance with capacity
up to 5 mg and resolution 0.01 mg (Code 259D).
Weight: 2,5 kg
Dimensions: (L)320x(W)240x(H)410 mm.
2
Fiber Tensolab - Code 331A
Single fibre electronic strength tester suitable for natural and
synthetic fibres. Complete with load cell of 500gram force
and class 0,5. Traction speed range from 0 to 1000 mm/min.
150 mm stroke.
RS232 port and software are included (PC is optional).
- Uniformity index
- short fibre content (%)
Complete with PC, printer and comb for sample.
Power supply: 85-265 V, 50/60 Hz, single-phase
Weight: 14 kg (instrument only)
Dimensions: (L)600 x (W)275x (H)190 mm.
3
Micronaire - Code 199B
An instrument to determine the fineness of cotton fibres on
8 g sample. Reading scale from 2.5 to 7 micronaire index.
Supplied complete with an electric micro-pump to produce
aspirated air. Equipped with mechanical calibration device.
Equipped with mechanical calibration device.
Accessories: calibration cottons (see page 9).
4
MicroLab - Code 250E
Weight: 25 kg
Dimensions: (L)600x(W)410x(H)250 mm
6
NATI - Code 3280A - Neps and Trash tester
Suitable for cotton, synthetic and blended slivers as well as short time and without influence of operator ability on the
raw cotton material. results.
By means of an optic-electrical system, NATI measures Neps
and Trash in different size classes: NATI fits an enlarged fibre waste box specifically conceived
• ≥0,50mm; ≥0,70mm; ≥1mm for Neps for testing of large size sample that is recommended specifically
• ≥0,25mm; ≥0,50mm for Trash. for combed cotton and synthetic slivers due to the small
content of Neps/g.
Specifically designed to be fast, reliable and easily transportable NATI is endowed with a brushless motor (maintenance free)
to the production floor for continuous testing and assessment granting unchanged performance even after several thousand
of Neps and Trash at different process stages. hours of test.
NATI is the only instrument presently available on the market
measuring and classifying automatically Neps and Trash Available in the version for PRINTER or PC connection (to be
content in samples of large size up to 6m of sliver (30g specified at time of order).
approximately, depending on sliver count).
NATI is the only Nep tester for which no manual preparation Optionals
of the sample is required thus ensuring total reliability of
results (it is known that the ability of the operator can lead to • Opening roller B174N for Cotton Code 3280 168 *
25%-50% variation in the results). • Opening roller S43 for Polyester Code 3280 169 *
• Printer DP 42E , 220V Code 3280 760
Transportable and fast in testing large size samples (it takes • Printer DP 42E, 110V Code 3280 764
less than 2 minutes to test 2g of sliver), NATI makes daily • Raw Cotton Selector Code 3282
control of carding department feasible, thus enabling a better * one opening roller at customer’s choice is already supplied
quality of carding operation and a better planning of card with the instrument.
maintenance.
FIBRES
7
Electronic wrap reel for slivers and
Available with a drum circumference of either 1 yard (Code
254B) or 1 metre (Code 254A). Adjustable drum speed
from 0 to 100 m/min., with accuracy of +/- 1 cm; equipped
with cutter. Designed to prevent any possible drawing of
the fibre sample.
Testing reel
Hand-driven reel for slivers and rovings.
Available with either 1 metre (Code 159A) or 1 yard (Code
159B) drum circumference.
Fitted with digital counter and cutter for accurate cutting
of the sliver sample.
Weight: 20 kg
Dimensions: (L) 430 x (W) 280 x (H) 600 mm.
Accessories:
• Set of 50 aluminium plates Code 273 2
• oil ether (1000 ml) Code 273 4
FIBRES
8
Climatest - Code 1722
Laboratory instrument for the conditioning of all textiles, such
as raw fibres, yarns on spools and hanks, fabrics and garments
in general, at constant temperature and humidity, according
to ISO norms.
Inner dimensions: (L)600x(W)520x(H)800 mm.
Climatest is supplied complete with two inner shelves.
Equipped with glass inner door for inspecting.
Adjustable temperature ranging from +5° C to +80°C, accuracy
± 0,5° C at 37° C
Relative humidity ranging from 15% Rh to 90% Rh, accuracy
±3%.
Digital reading of both temperature and humidity.
Automatic water supply into the reservoir.
Calibration cottons
Suitable for the calibration of cotton examination instruments,
in accordance with USDA standards.
For calibration of fiber fineness:
- American Upland Micronaire 5.5 code 199.2
- American Upland Micronaire 4.5 code 199.4
- American Upland Micronaire 3.5 code 199.6
- American Upland Micronaire 4 code 199.8
- American Upland Micronaire 2.6 code 199.14
- American Upland Micronaire 5.0 code 199.18
9
Yarns
Electronic wrap reels p. 12
Automatic wrap reel - Code 161C
Hand-driven wrap reels
Stationary adjustable yarn tensioner - Code 161M.330 p. 13
Fixed tensionmeter - Code 161M.334
Mobile vertical creel - Code 3102
Count analyser II p. 14
Count Lab Code 165.630
Yarn hairiness Meter - Code 260A
Air-Texturlab - Code 320C p. 15
Pretension weights
Water-Texturlab - Code 320D
Testrite Thermal Shrinkage - Code 326A
Hand driven Twist-Lab - Code 2531D p. 16
Electronic Twist-Lab - Code 2531C
Electronic automatic Twist Tester ”TWISTMATIC” - Code 2530B p. 17
Auto Cop Changer - Code 299A
Attrifil II - Code 233B p. 18
Autodyn 300 Plus - Code 2513A p. 19
Tenso-Lab 3 -Code 2512C - 2512A p. 20
Splice Scanner III - Code 2553 p. 21
Hand driven strength tester for yarns mod. 30 - Code 194B
Planofil - Code 2520 p. 22
Optional “KIT TWO” - Code 2520.600
ASTM yarn standards
Coloured yarn sample winder - Code 171A p. 23
Coloured yarn sample winder - Super Type - Code 171B
Sample card winder single model - Code 171C
“Scirocco” automatic conditioning cabinet - Code 172B p. 24
“Libeccio” semiautomatic conditioning cabinet - Code 245B p. 25
Humy tester - Code 185B
Hardness tester
Dye Scanner - Code 2940A p. 26
Mesdan Video Analyser - Code 250D p. 27
MINI-SPINNING p. 29
Laboratory carding machine - Code 337A
Stiro-Roving-Lab - Code 3371 p. 30
Ring-Lab - Code 3108A
Wind-Lab - Code 3374
Mini Assembly Lab - Code 3372 p. 31
Twister-Lab - Code 3373
Lab Knitter - Code 294E
YA R N S
Electronic wrap reel for yarns
To prepare yarn skeins of a definite and preset length, that
will then undergo testing for the determination of the related
count.
Equipped with electronic pre-selector for the automatic stop
at the preset length. Supplied complete with a 7 position
support creel (spool and small bobbin holder)
Adjustable double bar yarn tensioner.
The electronic wrap reel is available with the following reels:
code 161M with 1 m reel circumference
code 161X with 1 m reel circumference – 10 positions
code 161Y with 1 yd reel circumference
code 161W with 1.5 yd reel circumference
12
Optional for Wrap reels
Weight: 40 kg
Dimensions: (L)600x(W)600x(H)2000 mm.
YA R N S
13
Count analyser II
To determine the count of slivers,rovings,yarns and fabric weight
per sq.mt.Outputs: single result, minimum, maximum and
average, CV%, range%, sigma, I.C.(95%), results out of tolerance.
Standard measurement scales are available: Nec/mt, Nec/yd,
Nm, Den, Tex, Dtex, Grains/YD, Gr/sq.m. Sample lengths from
1 cm (1 inch) up to 999 m (yard). Different types of electronic
balances distinguishing COUNT ANALYSER models:
• code 1660: Sartorius balance - 210 g capacity - 0,01g
accuracy - pan size ø 116 mm (suitable for yarns)
• code 1657: Sartorius balance - 2.200 g capacity - 0,01g
accuracy - pan size 190x204 mm (large plate ideal
for sliver, roving and yarn count testing)
• code 1662: Sartorius balance - 150 g capacity - 0,001g
accuracy - pan size ø 100 mm (ideal for synthetic filaments
and fine yarns count testing)
Other models available on request.
Built in accordance with: ISO 3374, UN EN 29073, UNI 8014-
2-3-4, UNI EN ISO BS 2060, UNI 5114, BS 2471, ISO 3801,
ASTM D1907/D2646/D3776
Power supply: 110/220, 50/60 Hz, single phase
Weight: 10 kg
Dimensions: (L)700 x (W)400 x (H)200 mm.
Weight: 10 kg
Dimensions: (L)500 x (W)20 x (H)800 mm.
Pretension weights
Weights with double hook
g 3 code 320.2 g 7 code 320.10
g 4 code 320.4 g 8 code 320.12
g 5 code 320.6 g 9 code 320.14
g 6 code 320.8 g 10 code 320.16
Weights with simple hook:
g 100 code 320.18 g 350 code 320.28
g 150 code 320.20 g 400 code 320.30
g 200 code 320.22 g 450 code 320.32
g 250 code 320.24 g 500 code 320.34
g 300 code 320.26
Suitable for use with Air-Texturlab code 320C and
Water-Texturlab code 320D
15
Hand driven Twist-Lab - Code 2531D
Manual twist tester for twist measurement on single and plied with magnification lence. Very accurate elongation index with
yarns (S/Z). Two test methods are available: inbuilt mechanical clamp. Clamp/handle ratio is 10:1
A) Traditional “untwist/retwist” method for single spun yarns. Optionals: additional pretension weights (1N 1,5N and 2 N)
B) Direct “untwist” method for plied yarns, threads and Built according to the following international Built in accordance
multifilament yarns. with: UNI EN BS ISO 2061, ASTM D1422-99, ASTM D1423-
Adjustable test length (distance between clamps) from 1 to 50 03, UNI 9067, UNI 9277 , UNI 9069
cm (0.39-19.6 in). Pretension system with pulleys with 9- Power supply: 6 batteries 1.5V AA
weights kit, up to 70 cN. Built in digital tachometer (battery Weight: 9 kg
supplied) and optical sensor with led showing correct zero Dimensions: (L)1200 x (W) 380 x (H) 250 mm
starting and ending position. (+/-1 turn of accuracy). Supplied
Electronic Twist Tester to determine twist of single, twisted Pretension system with pulleys with 9-weights kit, up to 70 cN
(S&Z) and Open End yarns.Three methods available to be Adjustable clamp speed, up to 2000rpm.
selected by the operator: Endowed with two serial ports, for connection to PC (software
A) traditional “untwist/retwist” method for single yarns, and cable included) and to printer (optional).
B) Direct “untwist” method for plied yarns, threads and Accessories included: magnifying lens, fixed calliper,
multifilament yarns. pretension weights, bobbin holder, software and cable.
C)"Schutz" method (untwist, retwist and double countercheck) Optionals: Printer, additional pretension weights (1N 1,5N and
YA R N S
17
Attrifil II - Code 233B
Computerised instrument for automatic measurement of the Power supply: 110/220 V, 50/60 Hz single-phase.
friction coefficient of yarns. Air supply: 6 bar
Recommended for wax selection and control of waxing process Weight: 29 kg
(wax distribution on the yarn and wax duration) Dimensions: (L)460 x (W)310 x (H)290 mm.
Optional:
It enables automatic execution of multiple tests on a single Attrifil II (code 233B) can be connected with
package of yarn without operator attendance. the Auto Cop Changer (code 299A) to automatically
Continuous control of test parameters affecting the friction perform tests on 24 different bobbins.
coefficient such as input pretension (value and tolerance) and
yarn speed which can be adjusted by the operator up to
50cN and from 50 to 300m/min.
Very accurate reading of the input and output tension by
means of two electronic tensionmeter heads.
Pre-selection of the yarn length to be measured.
Pre-selectionof the yarn length between two consecutive
measurements in alternative to random testing.
18
Autodyn 300 Plus - Code 2513A
Modular strength tester executes automatically tensile tests Autoclamps maxi (code 2513.324 + 2513.326) for hi tenacity
and hysteresis cycles on yarns; semi-automatically executes yarn (also sewing thread).
traction, compression, tearing test on fabrics, covering adhesion LEA clamps for hanks (manual mode) code 2510.716(x2).
tests, tensile test on yarn and hanks (lea test). Scott 100 clamps for yarn and industrial small rope (mechanical)
The exclusive auto cop changer systems (A.C.C.) enables to code 2510.710A + 2510.710B.
test automatically up to 24 different yarns according to the Others clamps for yarns and fabrics are available on request.
parameters set in the PC by the operators. Built in accordance with: ISO, DIN, ASTM, BS, UNI, M&S
Automatic single column strength tester with movement standards
resulting from a ball bearing screw; it is controlled by a software Power supply: 220V/110V 50/60 Hz - 400VA
which runs all the functioning phases. Air supply : 6 bar
Thanks to the specific modular software, Autodyn allows Weight: 85 Kg
performing tests in compliance with main international Autodyn dimension : (L) 610 x (W) 610 x (H) 1340 mm
standards or according to parameters set by the operator A.C.C. dimension: (L) 570 x (W) 250 x (H) 230 mm - 17 kg
which can be saved for future need.
Autodyn can fit different load cells easy to change with Maximum strenght
19
Tenso-Lab 3 - Code 2512C / Code 2512A
Electronic semi-automatic single column strength tester (code • LEA clamps for hanks (manual mode) code 2510.716(x2).
2513C) suitable for the analysis of the tensile strength of all Others clamps for yarns and fabrics are available on request.
types of yarn up to 10 Kg. (1000 N).
C.R.E. tensile strength measuring system. Special models:
Zero self-resetting after every test. Code 2512D without Personal Computer. Endowed with a
Automatic settable pretension of the sample under test. small incorporated digital screen where resistance and
Adjustable distance between clamps ranging from 50 to500 elongation of single test are displayed.
mm. Adjustable tensile speed ranging from 20 to 500 mm/min. Code 2512A with capacity up to 300kg (3000N) and adjustable
with return of the moving clamp at the maximum speed. speed from 20 up to 500 mm/min. Ideal to test any kind of
Tenso-Lab 3 is directly controlled by a Personal Computer textiles. See fabric section for more details.
enabling an accurate control of the functioning and statistical Built in accordance with: ISO, DIN, ASTM, BS, UNI, M&S
processing of results, in a smart Windows system. standards
The following basic data can be obtained: resistance, Power supply: single-phase 110/220V, 50 Hz
elongation, single values, average, C.V.%, RKM, hysteresis Dimensions: (L) 610 x (W) 610 x (H) 1340 mm.
cycle tenacity. Weight: kg 75 (PC weight not included)
interchangeable load cells of 20N (code 2510.276), 100N
(code 2510.280), 1000N (code 2510.282) - only for code
2512A, 3000N (code 2510.283) - only for code 2512A; level
of accuracy of load cell 0,05%
Interchangeable mechanical and pneumatic clamps for yarns
available:
• mechanical clamp for standard yarns – code 2510.714A/B
• Scott 100 clamps for yarn and industrial small rope
(mechanical) code 2510.710A + 2510.710B.
YA R N S
Dimensions: (L)700x(W)300x(H)1350 mm
21
Planofil - Code 2520
To wind at the same time on the same table two yarns with
the same count, enabling a quicker preparation of the table
(50% time saving) and a better and immediate visual
comparison between the two wound yarns.
Optionals:
With Kit Two it is necessary to use particular trapezoidal
tables:
• Black table: Code 2520.610 *
• White table: Code 2520.620
22
Coloured yarn sample winder
Code 171A
Suitable for any type of card (max. length 320 mm, width 95
mm) and yarn count.
Up to 12 different yarn colours can be wound simultaneously.
Width of winding can be predetermined.
Equipped with adjustable yarn pre-tensioner.
23
“Scirocco” automatic conditioning
cabinet - Code 172B
24
“Libeccio” semiautomatic conditioning cabinet
Code 245B
Weight: 0,30 kg
Dimensions: (L) 160 x (W) 83 x (H) 30 mm
Hardness tester
Weight: 0,30 kg
25
Dye-Scanner - Code 2940
26
Mesdan Video Analyser - Code 250D
High performance computerised system conceived for the measurements).
analyses of fibres, yarns, fabrics, knits ,non-wovens, spinnerets 7) Accessory kit (code 250.325) for the microscopic analysis
etc. Equipment suitable to perform in a fast and easy way the and instruction of use.
fineness analysis of single fibres, identify the different type of Optionals:
fibres contained in a blend and analyse the composition 63X LENS code 250 336 (for biological microscope) it enables
percentage. Ideal to check the features of purchased material, a 2000X on screen magnification. (for biological microscope)
analyse yarn structure and detect possible defects. Suitable allows you to halve the magnification on screen and double
to measure the count (dtex/ den) of yarns and round section the sample field of vision.
filaments; analyse quality of Lycra filaments into the yarn; C-STEP CONNECTOR WITH 0.5X LENS Code 250 338
analyse the compactness of non-woven fabrics; analyses yarn (for biological Microscope). The installation of this connector
and fibre sections; measure section surfaces and perimeters; allows you to have the magnification on screen and double
analyse mechanical parts (i.e. needle points, spinnerets, etc); the sample field of vision.
reduce warp and weft density of fabrics to a cm or a inch; C-STEP CONNECTOR WITH 0.5X LENS (for Stereo-
process, store and print the produced measurements and the Microscopio). The installation of this connector
minimum, medium and maximum values, CV% and distribution allows you to have the magnification on screen and double
graphs. the sample field of vision. Cod. 250 334
1) LEICA biological Microscope: magnification on video TRINOCULAR KIT (for Stereo-Microscope) Code
from 128 to 1280x with slide movement device with micrometric 250 340
regulation, polarising light, for fibres and yarns analysis, etc. to display the sample image either on the PC monitor or in
2) LEICA Stereo-Microscope with magnification on video the oculars.
from 20x to 120x, illuminated base, for the analysis of fabrics, - Set of 50 slides, code 191 50
yarns and mechanical parts like traveller, needles and spinnerets. - Set of 100 slide covers, code 191 52
3) Optical fibre illumination device (for a perfect illumination - Immersion oil bottle, code 191 54
of a sample from different adjustable angles). - Pack of paper for printer, code 250 18
4) PC complete with LCD 17'' monitor and photographic - Set of cartridges for printer, code 250 322
quality printer. Built in accordance with: UNI 5423, AATCC 20, ASTM 276-
5) Professional Video-Camera with 1/2'' CCD. 00, ASTM 276-00A, ASTM 2130, IWTO 8, ASTM D626, UNI
YA R N S
6) Software "Mesdan Video Analyser" with acquisition 1130, UNI EN 12751, ISO 137
card (for the image acquisition, the production of measurements
and comments with the stored images and measurement Power supply: 110-220V, 50-60 Hz
directly on the live images, the statistic analysis of the acquired Weight: 50 kg
27
Example of Video Analyser analyses
Viscose fibre (length and section view) Analysis of non-woven fabric compactness
1 2 3
Defect analysis : presence of foreigner Defect analysis: presence of oil grease Section of indigo yarn (denim)
coloured fibres in the fabric in a piece of yarn
YA R N S
Section of trilobal fibre Section of round hollow fibres Fibre perimeter and area
measurement
28
Example of Video Analyser analyses
Viscose fibre (length and section view) Analysis of non-woven fabric compactness
1 2 3
Defect analysis : presence of foreigner Defect analysis: presence of oil grease Section of indigo yarn (denim)
coloured fibres in the fabric in a piece of yarn
YA R N S
Section of trilobal fibre Section of round hollow fibres Fibre perimeter and area
measurement
28
Mini Spinning
A real spinning mills In miniature to produce a small lot of short and long staple yarn ideal for:
• textile institute and researching centre
• spinning mills of blends
• spinning mills of wollen yarn
29
Ring-Lab - Code 3108A
Mini spinning frame at 6 spindle designed for spinning trials
of cotton, wollen, synthetic and blended yarns. Special model
to be supplied with slivers produced by Stirolab or roving.
Endowed with 5 rollers drawing the sliver up to 400X. Spinning
capacity from Ne 8 up to Ne 80. Electronic setting of delivery
speed, twist, draw and twist direction.
Technical details: variable speed drive from 3500 to 25000
R.P.M.; ring diameter 45 mm; tube length 240 mm;
Spindle speed: up to 18000 Rpm;
Special creel for sliver supply included;
Optional kit for core-yarn and compact yarn available on request.
Digital control panel to show in real time : Rpm – Tpm – Break
draft - Total draft - delivery speed in m/min - etc.
Weight: 100 kg
Dimensions: (L)900 x (W)900 x (H)1300mm
30
Twister-Lab - Code 3373
Optionals:
• Code 2940 100 electronic tensioner
• Upgrading kit to transform Lab knitter in Dye Scanner (fully
automatic version endowed with automatic cop changer)
A B C
LAB CARDING MACHINE WIND-LAB LAB KNITTER
1 code 337A 5 code 3374 4 code 294E
TWISTER-LAB
7 code 3373
Electronic semi-automatic strength tester for fabrics, ribbons, • code 2510.276 – maximum capacity: 2 daN (kg), accuracy:
strings and yarns. C.R.E. tensile strength measuring system. 0.1 cN (g) • code 2510.280 – maximum capacity: 10 daN
Zero self-resetting after every test. Automatic pretension of (kg), accuracy: 0.1cN (g) up to 1 daN (kg) and 1 cN from 1
the sample under test. Adjustable distance between clamps daN (kg) to 10 daN (kg) • code 2510.282 – maximum capacity:
ranging from 50 to 500 mm. Adjustable tensile speed ranging 100 daN (kg), accuracy: 1 cN (g) up to 10 daN (kg) and 10 cN
from 10 to 500 mm/min. with return of the moving clamp at from 10 daN (kg) to 100 daN (kg) • code 2510.283 – maximum
the maximum speed. Tenso-Lab 3 is directly controlled by a capacity: 300 daN (kg), accuracy: 10 cN (g) up to 30 daN (kg)
Personal Computer that enables an accurate control of its and 100 cN from 30 daN (kg) to 300 daN (kg) •level of accuracy
functioning and enables the operator to automatically perform, of load cell 0,05%
thanks to a wide number of software packages, a large number A wide selection of mechanical and pneumatic clamps, built
of tests according to the most recent international standards in accordance with international Standard, is available (please
(ISO – ASTM – DIN - M. & S.). Tests are performed in an refer to the following pages)
efficient and easy to use Windows environment. Pc optional.
The following tests can be performed according to specific
norms: traction, compression, seam slippage, hysteresis cycle, Built in accordance with: ISO, DIN, ASTM, BSi, UNI, M&S
adhesion and tearing. Hysteresis cycle test Seam slippage Power supply: 220V - 50/60 Hz single-phase, 8 kW
test. Weight: 83 kg (Pc excluded)
Different interchangeable load cells can be chosen among Dimensions: (L)610 x (W)600 x (H)1340 mm.
the following models:
FAB RI CS
High performance semi-automatic strength testers, endowed • Built in accordance with ISO standards: C.R.E.
with double column and ball screws straining frame, which Available load cells:
ensure high technical performances. Different types of clamps • Code 2510.276 – maximum capacity 2 daN (kg)
are available (to be selected when placing the order). • Code 2510.280 – maximum capacity 10 daN (kg)
The main difference between Tenso-Lab 1000 and Tenso- • Code 2510.282 – maximum capacity 100 daN (kg)
Lab 3000 can be summarised in the type of load cell fitted • Code 2510.283 – maximum capacity 500 daN (kg)
on these strength testers. Tenso-Lab 1000 is endowed with • Code 2510.284 – maximum capacity 1000 daN (kg)
a 10 kN (1000 daN) load cell whereas Tenso-Lab 3000 fits a • Code 2510.288 – maximum capacity 3000 daN (kg)
30 kN (3000 daN) load cell. –Tenso-Lab 3000 only
The main features of Tensolab 1000 & 3000 are: Precision of load cells: 0,05%
• Automatic pretension of the sample Several types of clamps, both mechanic and pneumatic,
• Automatic ”zero” setting after each single test are available according to the type of standards.
• Traction speed from 10 to 500 mm/min. Pc optional.
• Crosshead travel of 900 mm (clamps excluded).
• Tenso-Lab 1000 & 3000 are operated by a PC with Windows Built in accordance with: ISO 2062, DIN 51221/1, DIN 53834,
software. Other softwares for specific international standards ISO
are available. Power supply: 220 V, 50/60 Hz, single-phase, 8 kW
FABR I CS
35
Autodyn 300 - Code 2513
Modular strength tester executes automatically tensile tests Available also in 24 position automatic version - code 2513A
and hysteresis cycles on yarns; semi-automatically executes
traction, compression, tearing test on fabrics, covering adhesion Optionals:
tests, tensile test on yarn and hanks (lea test). Automatic single PC, printer ,interchangeable load cells of 20 , 100 , 1000,
column strength tester with movement resulting from a ball 3000N , and a wide range of mechanical and pneumatic grips
bearing screw; it is controlled by a software which runs all the for yarns, hanks and fabrics
functioning phases. Thanks to the specific modular software, Built in accordance with: ISO, DIN, ASTM, BS, UNI, M&S
Autodyn allows performing tests in compliance with main standards
international standards or according to parameters set by the Power supply: 220V/110V 50/60 Hz - 400VA
operator which can be saved for future need.. Autodyn can Air supply : 6 bar
fit different load cells easy to change with maximum capacity Weight: 85 Kg
of 3000N, and a huge range of pneumatic and mechanical Dimension : (L) 610 x (W) 610 x (H) 1340 mm
clamps
Modular design specifically conceived for textile industries
requiring bout automatic and semiautomatic testing of yarns,
hanks, fabrics, covering clothes and seams.
Maximum strenght
FAB RI CS
Maximum elongation
Elongation (%)
Strenght (g)
Sample/bobbin Sample/bobbin
36
Clamps available for Tenso-Lab e Autodyn.
Mechanical clamps for normal yarns Mechanical clamps for high tenacity
Pneumatic clamps for delicate yarns
Code 2510.714A (upper clamp) yarns.
such as POY, Lycra, cotton and worsted
Code 2510.714B (lower clamp) • Scott type 100 - Code 2510.710A +
yarns (2 kg of capacity).
2510.710B (upper and lower clamps)
Code 2510.680 (two units are needed)
• Scott type 300 - Code 2510.718A +
2510.718B (upper and lower clamps)
Pneumatic clamps for normal yarns Mini clamps for yarns up to 2 kg (for
and sewing threads up to 5 kg of Autodyn only) Code 2513.320 +
resistance.code 2510.660 2513.322
(two units are needed)
Clamps for yarns (hi tenacity) with
Maxi clamps for yarns up to 5 kg (for conical introducer Code 2510.670
Autodyn only ) Code 2513.324 + (two units are needed)
2513.326
FABR I CS
LEA clamps for hanks code Pneumatic main body clamps, Interchanceable grips, 100 mm wide,
2510.716(x2). 100mm wide code 2510.602(x2), to rubber covered code 2510.606G
bee used with a pair of grips to chose (x2), knurled code 2510.606Z (x2)
according to the needs (see photo and graab type (25x25 mm) code
close by). 2510.606X (x2)
Following 37
Clamps available for Tenso-Lab e Autodyn (continuation from previous page)
Mechanical main body clamps, Interchanceable grips, 100 mm wide, Mechanical clamps for non-woven
100mm wide code 2510.632(x2), to rubber covered code 2510.636G 200 mm wide, with rubber faced grips
bee used with a pair of grips to chose (x2), knurled code 2510.636Z (x2) code 2510.634 (x2) + 2510.638G
according to the needs (see photo and graab type (25x25 mm) code (x2). Also available for geotextiles.
close by). 2510.636X (x2)
Tool for perforation test of non- Tool for perforation test of non-
wovens in compliance with wovens Persoz type
UNI and ISO Standards. Code 2510.800
Code 2510.690 Tool for nail tearing test on fabric
Tools for perforation test of non-wovens in compliance with French norms. - Code 2510.704
Available also perforation tools for EN 388
Other clamps types available on demand.
Weight: 50 Kg
Dimensions: (L)500 x (W)300 x (H)700 mm.
38
Pneumatic Fabric Stiffness Tester - Code 3396
For the quick and accurate measurement of fabric stiffness.
A plunger of 25.4mm (1inch) diameter pushes the fabric through
a 38mm (1,5inch) diameter hole and the maximum force is
recorded
Optionals:
Printer with connecting cable (code 188.2 & code 188.4)
Software complete with connecting cable code 188.8
Weight: 23 kg.
Dimensions: (L)250 x (W)310 x (H)300 mm.
39
Crease Recovery Tester - Code 3109
40
Digital Bursting tester - Code 338A
41
Martindale - Code 2561E
Martindale - Code. 2561E - Marks & Spencer P19A Martindale Abrasion Resistance of
Instrument for the control of wear and pilling on all types of Handbags and Belt Fabrics
fabrics. - Marks & Spencer P19B Martindale Abrasion Resistance of
Model with 6 positions with digital control panel equipped Upholstery
with single and total rotation counter. - Marks & Spencer P19C Martindale Abrasion Resistance for
Supplied with 2 sets of weights of 9 and 12 kPa. Shirtings
Optional:
Spare springs for leather and artificial leather.
Optional:
no. 500 pieces of cotton crocking cloth code 198.422; Grey
scale A03 code 267A
FABR I CS
43
Wascator - Code 310B
High precision washing machine officially acknowledged as
a standard reference for washing tests on fabrics. Wascator
is also suitable for checking effects of washing detergents
and chemical products.
Equipped with microprocessor for setting several programs
of different functioning cycles.
Optional:
• Polyester makeWeight, code 310.72
• ECE reference detergent, code 310.4
• Sodium Perborate, code 310.8
• Stability template and percentage rule for checking the
dimensional stability, code 310.14
Built in accordance with: ISO 6330-5077, BS EN 26630,
IWSTM 31
Power supply: 380 V, 50 Hz, three-phase
Weight: 195 kg
Dimensions: (L)720x(W)690x(H)1315 mm
Built in accordance with: M&S P1A, P3A, P3B, P4A, P12, P91,
P99A, P134, BS EN ISO 26330
Power supply: 220/110V, 50/60 Hz, single-phase
Weight: 35 kg
Dimensions: (L)600x(W)600x(H)850 mm.
Weight: 75 kg
Dimensions: 920 (L) x 580 (W) x 750 (H) mm
44
Top-loading Home Laundry Washing Machine
- Code 310C
46
AATCC Crease Appearence Replicas - Code 3109.2
Built in accordance with: AATCC 124, AATCC 143, M&S P91, M&S
P134 ISO 7768
48
Perspirometer - code 257A
Incubator - code 251L
Instruments to check :
- colour fastness to perspiration in compliance with the following
standards : UNI EN ISO 105- E04; BS 1006; BS EN 20105;
AATCC 15; IWS TM 175
- colour fastness to swimming pool and sea water in compliance
with the following standards UNI EN ISO 105 E01; BS 1006;
BS EN 20105; AATCC 106; AATCC 107; IWS TM 6.
- colour yellowing to phenol in compliance with ISO and
AATCC standards (on approval) The system is composed of:
Code 257A - Perspirometer •standard Weight of 5 kg •set
of Plexiglas 20 plates 10 x 4 cm complete with two metallic
containers.Code 251L - Incubator cabinet with measuring
scale from +5°C to 78°C (+/-0,8°C at 37°C accuracy).
Electric power supply: 220/110 V, 50/60 Hz, single-phase
Weight: 45kg
Inner dimensions: 300 (L) x 240 (W) x 300 (H) mm
Outside dimensions: 550 (L) x 350 (W) x 420 (H) mm
Optionals:
- Multifibre fabrics DW 010 (ISO 105 e BS 1006). Code 257 424
- Grey scale A03 (ISO 105 e BS 1006) to assess colour staining
Code 267C - Grey scale A02 (ISO 105 e BS 1006) to assess
change in colour Code 267A
- Kit of chemicals to reproduce acid and alkaline perspiration
(in compliance with ISO, BSi, IWS, IWS TM). Code 257.8
50
Portable Microscope - Code 2604
Pick Counters
Optional
Pair of oculars 20X and additional lens 2X permits to have a
maximum of 180 enlargements Code 191.66 and Code
191.70
Additional lens 0.5X permits to halve the standard magnification
Code 191.64
Adaptor for Reflex type camera. Code 191.68
52
Vapour Permeability Tester - Code 3122
53
Air Tronic - Code 3240A
Weight: 50 kg
Dimensions: 420 (L) x 760 (W) x 430 (H) mm
55
YARN AND FABRIC
DYEING/FINISHING
YA R N A N D FA B R I C D Y E I N G / F I N I S H I N G
H.T. Auto-Dyeing Machine/1 – Code 323T
Optionals:
• Electronic tensioner Code 2940 100
• Two cylinders included in the machine. Others are available
as optionals.
58
H.T. Universal Dyeing Lab Machine - Code 3230
Laboratory equipment suitable to dye socks, skeins, cones
and flocks up to 1,5 kg.
Adjustable temperature up to +135°C.
Model with one dyeing position. Equipped with stainless steel
basin o basket/recipiente endowed with a wrapping device
for socks, fabrics, yarns (maximum size 500 mm height and
150 mm Ø).
Circulation pump with flow going from outside inwards and
vice versa
Dyeing cycle controlled by means of microprocessor with
digital reading.
YA R N A N D FA B R I C D Y E I N G / F I N I S H I N G
Cooling by circulation water-air / circulation only air.
Revolution speed adjustable from 0 up to 50 rpm.
Equipped with microcontroller with 50 settable programs.
Optional dyeing pot of 5000 cc capacity.
59
Dyeing Lab Machine/6 - Code 323M
YA R N A N D FA B R I C D Y E I N G / F I N I S H I N G
Roller length: 300 mm.
Adjustable speed form 0 to 15 m/min, by means of a
potentiometer.
61
Stenter Lab Dryer - Code 3106A
Weight: 40 Kg
Dimensions: (L) 650 x (W) 550 x (H) 400 mm
62
Fabric Vapor Lab - Code 3107
YA R N A N D FA B R I C D Y E I N G / F I N I S H I N G
by mean of a potentiometer.
Equipped with 1 dyeing basin – max capacity 1,5 litres. Staying
time of sample under treatment from 8 seconds to 30 minutes
Electric or steam heating.
Equipped with 1 washing tank, with pertinent squeezer (the
second and/or the third washing tanks with pertinent squeezers
are available on demand).
63
Hotplate / Stirrer - Code 3121
64
MISCELLANEOUS
Contact reading.
Measuring range from 1 to 25000 rpm and from 0,1 to
3810 m/min. with accuracy ± 1 rpm (from 1 to 599 rpm),
and ± 0,01% of reading (from 600 to 25000 rpm).
Complete with accessories.
Equipped with a set of rubber ferrules.
66
Tensiometer Zivy
Available in the following scales:
TEN 5K 1 - 5 g (cN) Code 182A
TEN 12K 2 - 12 g (cN) Code 182B
TEN 30K 5 - 30 g (cN) Code 182C
TEN 70K 10 - 70 g (cN) Code 182E
TEN 120K 20 - 120 g (cN) Code 182F
TEN 170K 50 - 170 g (cN) Code 182G
67
Electronic tensiometer DTMB
68
Stroboscope
Code 186 A:
• Analogical reading, scale from 200 to 18000 rpm
• Power supply: single-phase 220 V – 50/60 Hz
Code 186 B:
• Digital reading, scale from 0 to 30000 rpm
• Power supply: single-phase 220 V – 50/60 Hz
Code 186 C:
• Digital reading, scale from 200 to 30000 rpm
• Powered by rechargeable battery
Code 186 D:
• Analogical reading, scale from 200 to 18000 rpm
• Powered by rechargeable battery
MISCELLANEOUS
69
Thermo-anemometer Code 287C
70
Writing thermo-hygrograph - Code 180B
71
“Sartorius” analytic balance - Code 165.626
MISCELLANEOUS
73
Portable Ph-Meter - Code 322 C
Weight: 1.3 Kg
Dimensions: (L)280 x (W)200 x (H)75 mm.
74
Portable Thickness gauges
The following models are available:
Code 188F Measuring depth 200 mm
Thickness reading range 30mm - Accuracy 0,1 mm
Code 188R Measuring depth 200 mm
Thickness reading range 30mm - Accuracy 0,01 mm
Code 188G Measuring depth 30 mm
Thickness reading range 1 mm - Accuracy 0,001 mm
75
MESDAN S.p.A.
Via Masserino, 6
sales@mesdan.it
www.mesdan.it
MESDAN S.p.A.