Академический Документы
Профессиональный Документы
Культура Документы
2 Mbbr media
3 Aeration diffuser
Main features:
Production Shipping
Application Install
MBBR Media
Nitrificatione
Density Surface area Packing membrane-
Model Picture Size(mm) fficiency Dosing ratio%
(g/cm3) (m2/m3) number forming time
(gNH4-N/m3.d)
PE01 Φ12 x 9 0.96-0.98 >800 400-1200 >630000 3-15 days 15-67
Application
Application:
Flexible
Easy
installation.
Simple
maintenance.
Tube diffuser
Tube diffuser for effluent treatment can be connected on one side or in pairs to different
rectangular and round tubes (ABS material) with the appropriate adapter. The membranes
are manufactured
with premium
quality EPDM
material and are
availablewith fine
or coarse-bubble
perforation.
The support tubes
(ABS or PVC mate
rial)can be reused
when membranes
are replaced.
Polyhedral Hollow Ball
The hollow ball has features such as high free volume, low pressure drop, low mass-transfer unit height,
high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so
on, and the application temperature in media ranges from 60 Degree C to 150 Degree C. For these
reasons it is widely use in the packing towers in petroleum industry, chemical industry, alkali-Chloride
industry, coal gas industry and environmental protection, etc..
01
Specification
02
Surface area Free Bulk density Number per
(mm) (m2/m3) volume (%) (kg/m3) m3
Plastic ladder ring is a kind of high performance random packing that achieves high capacity and
low pressure drops. plastic ladder ring packing is also called plastic ladder ring, it added cone-
shaped flanging at one edge. So it reduced the resistance when air pass through bed layer, and
increased voidage. The height/diameter ratio of the plastic cascade ring packing is is 1/2 or 1/3
ratio .plastic cascade ring can be installed in a tower that tends to orient in a more structured way
such that its inner surface could be more efficient.
Application :
Plastic ladder ring is applied in synthetic ammonia factories decarbonization, desulfurize system,
crude oil separation, and other kind of separations, such as carbinol separation, organic acid
separations absorbing and desorbing towers
Plastic vsp ring have the characteristics oflarge void rate, low pressure drop and low height of
mass transfer unit, high extensive point, full contact of gas and liquid, low specific weight and high
mass transfer efficiency. It is widely used in the packing towers, petroleum industry, chemical
industry, alkali-Chloride industry, coal gas industry and environmental protection and etc.
Features:
4.Large throughout
Ф25 185 93 60
Ф50 100 95 45
Ф90 78 97 30
Tellerette Rosette Ringng
Tellerette scrubber packings are a high efficiency plastic tower packing designed for use in wet
scrubbers, cooling towers, mist eliminators, absorption columns and gas strippers.The open
filamentous shape of tellerette packing minimises restrictions to the gas flow through the packed
bed thus minimising gas pressure drop and energy consumption.Not only low pressure
drop,tellerett packings are effective with high-solid particulate loadings. This packings are also
effective mist eliminators following a wet scrubber.
As a defferent shape product with plastic pall ring. Plastic heilex ring is a new kind of open-
celled filler. Heilex ring has unique configuration, and usually made by PP injection. plastic heilex
ring enlarges its surface area and void space which contribute a lot to enhance the product
performance.
And heilex ring won’t nested, and the gas-liquid could be well distributed.
So heilex ring can widely used in the acid
gas absorption cooling and gas purification
processes etc.
Bulk
Specification Surface area Void Numbers Packing
inch density
mm m2/m3 space% per/m3 factorm-1
kg/m3
2'' 50x50 101 94 65 8000 70
3'' 76x76 55 96 56 3420 87
4'' 100x100 75 95 48 1850 46
Plastic Covering Ball With Borderg
The plastic covering ball with border , plastic side covering ball can reduce acid-mist
mostly,improve the pollution of CO2 in oxygen so concerning safeguard of consuming water quality,
depuration of atmosphere etc. plastic covering ball with border , Plastic Side Covering Ball may
broadly used in energy plant collectively with other companies of totally different sorts consuming
water treatment of coagulation tank , horizontal acid storage space tank and salt consuming water
and so on.
Bulk
Specification Surface area Void Numbers Packing
DxHxT density
mm m2/m3 space% per/m3 factorm-1
kg/m3
25 25x17.5x1.0 185 95 96 74000 216
38 38x19x1.2 116 96 68 16000 131
50 50x25x1.5 85 96 83 9000 97
76 76x38x2.6 81 95 84 3980 94.5
100 100x50x3.0 76 94.1 45 1800 101.1
Plastic Super Saddle Rings, Plastic Intalox Saddlesg
The plastic super saddle rings, plastic intalox saddles are enhanced from from plastic saddles,
and plastic super intalox saddles’ unique scalloped edge is the key to the products’ high
performance.
Sion-Chepack plastic super saddle rings, plastic intalox saddles are a versatile and economical
industry standard with well-known performance characteristics.
Bulk
Specification Surface area Void Numbers Packing
DxHxT density
mm m2/m3 space% per/m3 factorm-1
kg/m3
16 16x8.9x1.1 370 85 135.6 299136 602.6
25 25x12.5x1.4 228 90 97.8 8150 312.8
38 38x19x1 132.5 91 57.5 27200 175.8
50 50x25x1.5 114.2 92.7 54.8 10740 143.1
76 76x38x3 90 92.9 68.4 1480 112.3
Q-Pac Tower Packing Mediag
Q-Pac packing media mainly applied in wet scrubbing/air strpping equipment.Its uniformly
spaced bar-and-rod design and self-cleaning properties minimize plugging by mineral scale of
biological growth. That means less down time for maintenance.Additionally, The Q-Pac tower
packing media has natural affinity for oil, and provide high surface area in the form of uniformly
spaced rods with no narrow joints that tend to trap sludge particles. Round rods pointing
downward allow suspended solid particles to fall from the coalescing media into the sludge
compartment for periodic collection.
Advantages:
Bulk
Surface area Void Numbers Packing
Dimension density
m2/m3 space% per/m3 factorm-1
kg/m3
8.25x9.5cm 98.4 96.3 33.7 1165 23
Hacketten, Tri-Pack, Globe-Pac Tower Packingg
Plastic tri-pack tower packing media (also named as hacketten, Tri-Pak, plastic globe-pac
packing) is a hollow spheri-cal-shaped packing made of injection moulder plastic in four sizes
diameter.Based on original Net structure, it increase spherical rib & struts' distribution.Dense
distribution will increase intercept surface or points on each intricate ribs. Water droplet type
vertical bars will promote gas ,liquid seperation.
Hacketten, Tri-Pack, plastic globe-pac packing has high void space,greater than packings of
comarable size, and achieves superior pressure drop values, up to 90% reduction, as compard to
other products. The packing has a high active surface area, exposing all of its surface area to be
fully wetted during column operation. The performance capabilities of plastic Tri-Packs have
results in significant saving in hundreds of packed column operations.Tri Bio Pack Media are
widely applied for Absorbers, Degassing, Liquid/liquid extraction, water treatment, Heat transfer
etc.
25 85 90 6.2 28
32 70 92 5.6 25
50 48 93 4.2 16
95 38 95 3.3 12