Академический Документы
Профессиональный Документы
Культура Документы
Dimensions
- Calculation of screw Dimensions T10
- Guidelines for maximum permissible operation force T11
- Minimum yield loads T9
- Estimation of screw diameters VDI 2230 T12
- Fatigue strength T13
- Steels for low and high temperature applications (-253 to -10 ° C) DIN 267/13 T24
- Steels for low and high temperature applications (-10 to -300 ° C) DIN 267/13 T24
- Steels for low and high temperature applications (above 300 ° C)</< td> DIN 267/13 T25
- Suitable mating materials for bolts and nuts</< td> DIN 267/13 T25
- Stainless steels
- Stainless steels -- Designation system (section 1) ISO 3506 T26
- Stainless steels -- Designation system (section 2) ISO 3506 T27
- Stainless Steel grades and property classes
Mechanical properties according to DIN-ISO 3506 T28
Lower yield stress at elevated temperatures T28
Coefficients of friction for the bearing area (bolt or nut) and the thread µ total T29
Preload Fv and tightening torque Ma T29
Minimum breaking torques (Mb min) T29
Chemical composition T30
Corrosion resistance T30
Tables of chemical resistances (page 1) Acetic acid thru Barium chloride T31
Tables of chemical resistances (page 2) Barium hydroxide thru Copper chloride T32
Tables of chemical resistances (page 3) Copper carbonate thru Hydrazine sulphate T33
Tables of chemical resistances (page 4) Hydrochloric acid thru milk T34
Tables of chemical resistances (page 5) Mixed acid thru phenol T35
Tables of chemical resistances (page 6) Phosphoric acid thru Potassium sulphate T36
Tables of chemical resistances (page 7) Pyrogallic acid thru sugar solution T37
Tables of chemical resistances (page 8) Sulphur, dry thru vegetables T38
Tables of chemical resistances (page 9) Vinegar thru zinc sulphate T39
- Special materials
Hastelloy ® Inconel ® Monel ® T40
Nilo ® Nimonic ® Titanium T40
- Brass, kuprodur (copper) ISO 8839 T42
- Aluminum (aluminium) ISO 8839 T42
- Polyamid (nylon ®) T43
Tightening of fasteners
- Coefficients of friction in the bearing area (bolt or nut) and in the thread µ total T20
- Steel screws T21
- Serrated and ribbed screws and nuts T22
- Thread forming screws DIN 7500 T22
Threads
- Screw threads to DIN standards, overview T44
- Screw threads to other standards, overview T50
- ISO metric screw threads - basic dimensions ISO 261 T51
-Threads: Limits of size/tolerance for nuts 5H/6H ISO 965 T52
-Threads: Limits of size/tolerance for nuts 5H/6H (continued) + 7H ISO 965 T53
-Threads: Limits of size/tolerance for bolts 6g/6h ISO 965 T54
-Threads: Limits of size/tolerance for bolts 6g/6h (continued) + 8g ISO 965 T55
Tolerances
- Kaflok ® (nylon ® - polyamid) patch (See note: A below) DIN 267/28 T82
Quality Certificates