Академический Документы
Профессиональный Документы
Культура Документы
Deemed to be University
ENGINE
HEAT ENGINE
IC & EC ENGINES
Engine block
Manufacturing method
Casting and forging
Functions
Maintaining the engine's stability and
lubrication while withstanding a variety
of temperatures and loads.
Materials used
Aluminium alloy
Casting
Functions
Housing the exhaust and intake
valves, the fuel injector and
necessary linkages, and passages
for the fuel and air mixture. In
water-cooled engines.
Materials Used
Aluminium alloy
Manufacturing method
Casting
Functions
1. Transfer force from expanding gas in
the cylinder to the crankshaft via a
piston rod and/or connecting rod.
Materials Used
Cast iron, cast steel, forged steel, cast
aluminium alloys and forged aluminium alloy
Manufacturing method
Casting
Functions
1. Sealing the combustion chamber so that
there is minimal loss of gases to the crank
case.
2. Improving heat transfer from the piston to
the cylinder wall.
3. Regulating engine oil consumption by
scraping oil from the cylinder walls back to
the sump.
Manufacturing method
Forging and heat treatment
Functions
Transfers motion from the piston to
the crankshaft and functions as a
lever arm.
Materials Used
Cast iron
Manufacturing method
Casting
Functions
A flywheel is used to store
energy. When torque is applied
to a flywheel, its energy is
conserved in its rotational
momentum.
Materials Used
Silicon-chrome steel for (ILV)
Austenitic nickel-chromium (EV)
Manufacturing method
Extrusion forging, forging press,
Heat treatment and lathe
operations.
Functions
1. They permit the intake of fuel
and air.
2. Then they must seal
compression.
3. After the explosion the exhaust
valve must permit the burned
gases to leave the combustion
chamber.
Excellence and Service
CHRIST
Engine construction
Deemed to be University