Air Compressor Installation Initial box if checks complete and accepted, write N/A (Not Applicable) or P/L (Punchlist) as required. N/A or Item Description WI Client P/L 1 Labeling/identification/inspection tags attached and verified as correct 2 Location & overall dimensions correct 3 Foundations/support structure complete and anchor bolts set 4 Support structure torqued (where applicable) 5 Installation checked against specifications & design drawings 6 Compressor components installed and correct: 6.1 - Air intake filter 6.2 - Air intake silencer 6.3 - Air inlet regulating valve 6.4 - Unloading and blow off valves 6.5 - Lube oil cooler 6.6 - Air intercooler/aftercooler 6.7 - Oil filter and moisture separator 6.8 - Valves and piping – flanged connections free from stress 6.9 Local control panels and instrumentation installed and correct 7 Coupling alignment complete & recorded 8 Lubrication complete & recorded 9 Motor, bumped, direction of rotation correct 10 Checked compressor free to be rotated by hand 11 V-belt check sheet verified & complete 12 Drive coupling reconnected 13 Safety guards installed 14 Protective coatings intact and correct 15 Cooling water checked Remarks and Attachments Remarks Attachments _________________________________________________________________________ _________________________________________________________________________ _________________________________________________________________________ Final Verification and Sign off
WI-0000-FIC-002 REV0. This Document is Uncontrolled once Printed. 1 OF 2