Академический Документы
Профессиональный Документы
Культура Документы
Table of Contents
1 General .......................................................................................................................................................... 5
1.1 Summary of technical data......................................................................................................................... 5
1.2 Specified minimum oil conservator height ............................................................................................... 6
1.3 Survey............................................................................................................................................................. 7
2 Technical Data.............................................................................................................................................. 14
2.1 Rated through-current (Iu), rated step voltage (Ui) and step capacity (PSt) ...................................... 14
2.2 Life of the vacuum interrupters ................................................................................................................. 14
2.3 Rated withstand voltages of the internal insulation............................................................................... 15
3 Appendix ....................................................................................................................................................... 17
3.1 On-load tap-changer VACUTAP® VV - classification (737774) ............................................................ 17
3.2 On-load tap-changer VACUTAP® VV III 250/400/600-Y/D-40...76–10/12-0 (899120)................... 18
3.3 On-load tap-changer VACUTAP® VV III 250/400/600-Y/D-40...76-10/12-W/G (899119).............. 19
3.4 On-load tap-changer VACUTAP® VV III 250/400/600-D-145–10/12-0 (899163) ........................... 20
3.5 On-load tap-changer VACUTAP® VV III 250/400/600-D-145-10/12-W/G (899162) ...................... 21
3.6 On-load tap-changer VACUTAP® VV I 401–76–10/12-W/G (899121) ............................................... 22
3.7 On-load tap-changer VACUTAP® VV I 401-145-10/12-W/G (727986).............................................. 23
3.8 On-load tap-changer VACUTAP® VV,
terminal dimensions - with change-over selector (737775)................................................................. 24
3.9 On-load tap-changer VACUTAP® VV,
terminal dimensions - without change-over selector (737776) ........................................................... 25
3.10 On-load tap-changer VACUTAP® VV, position of the connecting terminals (899051) ..................... 26
3.11 On-load tap-changer VACUTAP® VV, oil suction pipe (optional) (739172)........................................ 27
3.12 On-load tap-changer VACUTAP® VV, tap-changer head without oil suction pipe (898863)........... 28
3.13 On-load tap-changer VACUTAP® VV, OLTC head with oil suction pipe (737060) ............................. 29
3.14 On-load tap-changer VACUTAP® VV, head cover design - standard design (737777) ..................... 30
3.15 On-load tap-changer VACUTAP® VV, head cover design,
standard design with supervisory control (737778) ............................................................................... 31
3.16 On-load tap-changer VACUTAP® VV, head cover design with flange
for pressure relief device (737779)........................................................................................................... 32
3.17 On-load tap-changer VACUTAP® VV,
head cover design with pressure relief device MPREC (737780).......................................................... 33
3.18 On-load tap-changer VACUTAP® VV, head cover design,
dimensions of tap change supervisory control (733452) ....................................................................... 34
3.19 On-load tap-changer VACUTAP® VV, pipe connection (899496) ......................................................... 35
3.20 On-load tap-changer VACUTAP® VV, neutral point connection lead (738806)................................. 36
3.21 On-load tap-changer VACUTAP® VV, tie-in resistors attached laterally (899407) ........................... 37
3.22 On-load tap-changer VACUTAP® VV, installation drawing (738902) .................................................. 38
3.23 On-load tap-changer VACUTAP® VV, assembly drawing bell-type mounting (899110) ................... 39
3.24 On-load tap-changer VACUTAP® VV, position of OLTC for bell-type mounting (899409) .............. 40
3.25 On-load tap-changer VACUTAP® VV, assembly drawing cover mounting (898866) ......................... 41
3.26 On-load tap-changer VACUTAP® VV, drive shaft versions of the upper gear unit (737782) .......... 42
3.27 On-load tap-changer VACUTAP® VV, swivelling range of upper gear unit,
drive shaft on the left (899210)................................................................................................................ 43
3.28 On-load tap-changer VACUTAP® VV, swivelling range of upper gear unit,
drive shaft on the right (899211) ............................................................................................................. 44
3.29 On-load tap-changer VACUTAP® VV, horizontal drive shaft (899169) ............................................... 45
3.30 On-load tap-changer VACUTAP® VV, transformer with on-load tap-changer,
schematic drawing (899759)...................................................................................................................... 46
1 General
1.1 Summary of technical data
VVIII VV III VV III VV III VVIII VVIII VV I VV I
On-load tap-changer
250 Y 250 D 400 Y 400D 600 Y 600 D 401 3 ) 401 3 )
3 3 3
1
3 at any 3 at any 3 at any
Number of poles and at any position
neutral position neutral position neutral position
application on the
point on the point on the point on the
w inding
w inding w inding w inding
Max. rated through-current I u m
250 400 600 400
(in A)
AC w ithstand voltage
70 140 70 140 275 70 140 70 140 275 70 140 70 140 275 140 275
(in kV, 50 Hz, 1 min.)
Table 1a
1.3 Survey
1.3.1 Survey of the designs (no. of poles, change-over selector, installation length, fig. 1, 899541)
1
Technical Data TD 203/05 EN VACUTAP® VV
The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration.
203/05 EN ©Maschinenfabrik Reinhausen GmbH 2017 7
1 General
2a
2b
Technical Data TD 203/05 EN VACUTAP® VV
The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration.
203/05 EN ©Maschinenfabrik Reinhausen GmbH 2017 9
1 General
2c
Technical Data TD 203/05 EN VACUTAP® VV
The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration.
10 ©Maschinenfabrik Reinhausen GmbH 2017 203/05 EN
1 General
4
Technical Data TD 203/05 EN VACUTAP® VV
The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration.
12 ©Maschinenfabrik Reinhausen GmbH 2017 203/05 EN
1 General
5
Technical Data TD 203/05 EN VACUTAP® VV
The copying, distribution and utilization of this document as well as the communication of its contents to others without expressed authorization is prohibited.
Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or ornamental design registration.
203/05 EN ©Maschinenfabrik Reinhausen GmbH 2017 13
2 Technical Data
2 Technical Data
2.1 Rated through-current (Iu), rated step voltage (Ui) and step capacity (PSt)
Table 2 Rated through-currents (Iu), related rated step voltage (Ui) and step capacities (PSt), at highest and
lowest rated step voltage of the step capacity curve (see fig. 6).
1)
Note: See also diagram Ui-/Iu
Without a1= Between tap selector contacts of the winding of one step position
change-over (connected or not).
selector a = Between beginning and end of a tapped winding and, with coarse
tap winding, between beginning and end of a coarse tap winding.
Note for coarse tapping arrangement in (-) -position of the change-
over selector:
When stressed with impulse voltage, the permissible withstand voltage
"a“ must be adhered to between the end of a coarse tap winding con-
nected with the K tap selector contact and the tap selector contact at
the end of the tapped winding of the same phase.
b = Between the tap selector contacts of different phases and between
With change-over selector contacts of different phases, which are connec-
reversing ted with the beginning/end of a tapped winding or with a tap selector
switch contact.
(+) - position The permissible voltages between the contacts for tap-changers for
delta connection vary with the positions of the change-over selector
and the tap selector. This is the reason the different permissible
withstand voltages (b1, b2 or b3) must be adhered to for an insulation
distance.
b1 = Between selected contacts of different phases.
b2 =From the selected contact of one phase to the unselected contacts
of other phases.
With b3 = Between unselected contacts of different phases.
reversing f = Between tap selector contacts and (+) -change-over selector contacts
switch to ground.
(–) - position Different values apply to designs with delta connection:
f1 = Between terminal and ground and in the (+) - position of the
change-over selector, between (+) -change-over selector contacts
and ground.
f2 = Between unselected tap selector contacts and in the (-) -position
of the change-over selector, between (+) - contacts and ground.
Additional for coarse tapping arrangement in (+) - position of the change-
over selector:
c1 = From one (-) - change-over selector contact to terminal of the same
With coarse tap phase.
selector c2 = Between (-) -change-over selector contacts of different phases and
(+) - position a (-) - change-over selector contact to a (+) - change-over selector
contact of another phase.
Different permissible values apply to tap-changers with delta
connection:
c21 = Between a (-) -change-over selector contact and a (+) -
change-over selector contact of another phase.
c22 = Between (-) change-over selector contacts of different phases.
Fig. 7
Specific dielectric stress of the tap winding
3 Appendix
3.1 On-load tap-changer VACUTAP® VV - classification (737774)
3.8 On-load tap-changer VACUTAP® VV, terminal dimensions - with change-over selector (737775)
3.9 On-load tap-changer VACUTAP® VV, terminal dimensions - without change-over selector (737776)
3.10 On-load tap-changer VACUTAP® VV, position of the connecting terminals (899051)
3.11 On-load tap-changer VACUTAP® VV, oil suction pipe (optional) (739172)
3.12 On-load tap-changer VACUTAP® VV, tap-changer head without oil suction pipe (898863)
3.13 On-load tap-changer VACUTAP® VV, OLTC head with oil suction pipe (737060)
3.14 On-load tap-changer VACUTAP® VV, head cover design - standard design (737777)
3.15 On-load tap-changer VACUTAP® VV, head cover design, standard design with supervisory control (737778)
3.16 On-load tap-changer VACUTAP® VV, head cover design with flange for pressure relief device (737779)
3.17 On-load tap-changer VACUTAP® VV, head cover design with pressure relief device MPREC (737780)
3.18 On-load tap-changer VACUTAP® VV, head cover design, dimensions of tap change supervisory control (733452)
3.20 On-load tap-changer VACUTAP® VV, neutral point connection lead (738806)
3.21 On-load tap-changer VACUTAP® VV, tie-in resistors attached laterally (899407)
3.23 On-load tap-changer VACUTAP® VV, assembly drawing bell-type mounting (899110)
3.24 On-load tap-changer VACUTAP® VV, position of OLTC for bell-type mounting (899409)
3.25 On-load tap-changer VACUTAP® VV, assembly drawing cover mounting (898866)
3.26 On-load tap-changer VACUTAP® VV, drive shaft versions of the upper gear unit (737782)
3.27 On-load tap-changer VACUTAP® VV, swivelling range of upper gear unit, drive shaft on the left (899210)
3.28 On-load tap-changer VACUTAP® VV, swivelling range of upper gear unit, drive shaft on the right (899211)
3.30 On-load tap-changer VACUTAP® VV, transformer with on-load tap-changer, schematic drawing (899759)
1) On-load tap-changer
2) Motor-drive unit
3) Protective relay
4) Oil conservator