Scribd Logo
Загрузить

Добро пожаловать в Scribd!

  • Grab

    Загружено:

    vihaan
    109 просмотров15 страниц
    The document provides instructions for putting a 30_EGF excavator grab into operation, including greasing pivot points, gearboxes, press rods, and rope sheaves; replacing a filter cap; checking oil levels; installing batteries and antennas; checking the suspension, ropes, cylinders, and scoops; performing a trial run; checking for leaks; and verifying cycle times. Grease specifications and maximum/minimum oil levels are also included. The document aims to ensure the grab is properly prepared, tested, and stored for use.

    Исходное описание:

    smag grab

    Оригинальное название

    grab

    Авторское право

    © © All Rights Reserved

    Доступные форматы

    PDF, TXT или читайте онлайн в Scribd

    Этот документ был вам полезен?

    Это неприемлемый материал?

    Пожаловаться на этот документ
    The document provides instructions for putting a 30_EGF excavator grab into operation, including greasing pivot points, gearboxes, press rods, and rope sheaves; replacing a filter cap; checking oil levels; installing batteries and antennas; checking the suspension, ropes, cylinders, and scoops; performing a trial run; checking for leaks; and verifying cycle times. Grease specifications and maximum/minimum oil levels are also included. The document aims to ensure the grab is properly prepared, tested, and stored for use.

    Авторское право:

    © All Rights Reserved
    Скачайте в формате PDF, TXT или читайте онлайн в Scribd
    Отметить как неприемлемый контент
    109 просмотров15 страниц

    Grab

    Загружено:

    vihaan
    The document provides instructions for putting a 30_EGF excavator grab into operation, including greasing pivot points, gearboxes, press rods, and rope sheaves; replacing a filter cap; checking oil levels; installing batteries and antennas; checking the suspension, ropes, cylinders, and scoops; performing a trial run; checking for leaks; and verifying cycle times. Grease specifications and maximum/minimum oil levels are also included. The document aims to ensure the grab is properly prepared, tested, and stored for use.

    Авторское право:

    © All Rights Reserved
    Скачайте в формате PDF, TXT или читайте онлайн в Scribd
    Отметить как неприемлемый контент
    из 15

    30_EGF_PUT IN OPERATION

    PUTTING IN OPERATION
    30_EGF_PUT IN OPERATION

    Construktive description / main units

    SUSPENSION

    GRAB HEAD

    PRESS ROD

    MOBILE
    Traverse
    LOCKING
    ZYLINDER Lower
    Traverse

    HYDRAULIK
    ELEKTRIC
    SCOOP
    30_EGF_PUT IN OPERATION

    1. greasing scoop
    pivot points

    Lithium-saponified grease
    DIN 51825/2 KTA-L2k

    click
    30_EGF_PUT IN OPERATION

    2. greasing gear
    boxes

    Lithium-saponified grease
    DIN 51825/2 KTA-L2k
    30_EGF_PUT IN OPERATION

    greasing gear boxes

    click
    30_EGF_PUT IN OPERATION

    3. greasing press
    rods

    Lithium-saponified grease
    DIN 51825/2 KTA-L2k

    click
    30_EGF_PUT IN OPERATION

    4. greasing rope sheave


    bearings

    Lithium-saponified grease
    DIN 51825/2 KTA-L2k

    click
    30_EGF_PUT IN OPERATION

    5. replacing the filter cap

    ap
    rc
    te
    pl

    fil
    ug
    30_EGF_PUT IN OPERATION

    6. check the oil filling

    Hydraulic oil
    DIN 51524/2, Typ HLP 10

    50 – 60mm

    Maximum

    Minimum
    30_EGF_PUT IN OPERATION

    7. installation of akku/receiver and


    antenna

    nn a
    ant e
    ku
    ak

    G
    LU
    P
    i v er

    LE
    rece
    MA
    FE
    /
    LE
    MA

    Accumulators have to be charged


    12 hour prior each use
    30_EGF_PUT IN OPERATION

    8. Checking of grab

    Suspension

    Ropes

    Pres Sheaves
    s ro
    ds
    Cy
    lin
    d er

    Scoops
    30_EGF_PUT IN OPERATION

    9. Connect the crane and open grab


    by pulling the emergency line
    30_EGF_PUT IN OPERATION

    10. Greasing ropes

    Adhesive grease
    DIN 51513 BC
    30_EGF_PUT IN OPERATION

    carry out a trial run without bulk material !

    11. Checking of gab

    Max 20 mm with free hänging closed and empty Grab

    MAX 20 mm

    12. If more than 20mm

    Deaerate the hydraulic system as mentoined in


    instruction no. 031
    30_EGF_PUT IN OPERATION

    13. Checking for internal leakage

    Does the Grab remain in closed position after 10


    minutes closed and free hanging?

    14. Checking the cycle times

    Grab cycle times are mentoined in your Grabs manual!

    15. Close the Grab and store it


    in the depositing device

    Last Update: 03.07.2006


    Abt.: GS/ Kevin Wenke
    SMAG GmbH
    Salzgitter Maschinenbau
    Peiner Grabs Service Department
    Windmühlenbergstr. 20-22
    38259 Salzgitter

    Вам также может понравиться