Академический Документы
Профессиональный Документы
Культура Документы
PIEZAS INDIVIDUALES
Cant.
Ref. Cant. NPR Nota No. de pieza Nombre de la pieza
req.
SPOOL
1 NPR 3T-0688 1
SPRING
2 NPR 9M-1986 1
PLUG-O-RING
3 NPR 9S-8008 1
PLUG-O-RING
4 NPR 9S-4191 3
(TRANSMISSION OIL FILTER DRAIN)
SEAL-O-RING
5 NPR 3J-1907 3
BASE-XMSN OIL FILTER
6 NPR 125-0542 1
SEAL-O-RING
7 NPR 2S-8439 1
HOUSING AS
8 NPR 3P-0887 1
RETAINER
9 NPR 7S-6745 1
SPRING
10 NPR 3S-8652 1
RING-RETAINING
11 NPR 2J-6356 1
SEAL-O-RING
12 NPR 3D-2824 1
PLUG-O-RING
13 NPR 9S-4182 1
SEAL-O-RING
14 NPR 3J-7354 1
FILTER ELEMENT AS-OIL
15 NPR 1R-0773 1
(ADVANCED EFFICIENCY)
Desarmado y Armado
12H, 140H and 160H Motor Graders Power Train
140H Motor Grader, Powered By 3306B Engine
Número de medio - SEBP5051-05 | Fecha de publicación - 01-08- Número de medio - Fecha de publicación -01-10- Fecha de actualización -12-10-
SENR8548-14 2011 2011
2012 | Fecha de actualización - 10-08-2012
Ver información más reciente de juego i03477845
125-3286 FILTER GP-OIL -TRANSMISSION i01119234
S/N 5HM1-UP
PART OF 8W-6235 LINES GP-TRANSMISSION OIL
Transmission Oil Filter Base - Remove
GRUPO ENTERO and Install
Ref. Cant. NPR Nota No. de pieza Nombre de la pieza
SMCS - 3068-010 Ver imagen
Removal Procedure
Start By:
3. Remove two bolts (6) from transmission oil filter base (2).
Remove transmission oil filter base (2) from the mounting
brackets.
Ver imagen
g00621156
Illustration 1
2. Remove eight bolts (5), the washers, and four flange halves
(4) in order to disconnect two hose assemblies (3). plug the
hose fittings in order to prevent the loss of oil, and keep dirt g00621160
Illustration 3
out of the oil system.
4. Remove plug (10) from the transmission oil filter base (2) . 2. Install spring (7), spool (8), and plug (10) in the
transmission oil filter base (2) .
5. Remove O-ring seal (9) from plug (10) .
6. Remove spool (8) and spring (7) from the transmission oil Ver imagen
filter base (2) .
Installation Procedure
Note: Verify that all of the components of the differential and
bevel gear are clean and free of foreign material prior to
installation.
Note: Check all of the components and all of the O-ring seals for
wear or for damage. Replace the components, if necessary.
Lubricate the O-ring seals lightly with the lubricant that is being
sealed.
g00621157
Illustration 5
Ver imagen
3. Position transmission oil filter base (2) to the mounting
bracket. Install two bolts (6) and the washers in order to
secure transmission oil filter base (2) to the mounting
bracket.
Ver imagen
g00621160
Illustration 4
End By: Install the transmission oil filter. Refer to Operation and
Maintenance Manual, "Transmission Oil Filter - Remove and
1 1
Install" for the correct procedure.
0
i01193816
3. Remove four bolts (6) from transmission oil filter base (2). Note: Check all of the components and all of the O-ring seals for
Remove transmission oil filter base (2) from the mounting wear or for damage. Replace the components, if necessary.
brackets. Lubricate the O-ring seals lightly with the lubricant that is being
sealed.
Ver imagen
Ver imagen
g00621160
Illustration 3 g00621160
Illustration 4
Note: The current model only has one fitting on the top of
the transmission oil filter base (2) . Note: The current model only has one fitting on the top of
the transmission oil filter base (2) .
4. Remove plug (10) from the transmission oil filter base (2) .
1. Install O-ring seal (9) on plug (10) .
2. Install spring (7), spool (8), and plug (10) in the secure transmission oil filter base (2) to the mounting
transmission oil filter base (2) . bracket.
End By: Install the transmission oil filter. Refer to Operation and
Maintenance Manual, "Transmission Oil Filter - Remove and
1 1
Install" for the correct procedure.
0
g00638958
Illustration 5
Ver imagen
g00638956
Illustration 6