Академический Документы
Профессиональный Документы
Культура Документы
a) EQUIPMENTS
i. For columns, vessels, reactors, Exchangers, furnaces, ejectors etc., measurement shall be
on square meter basis taken over the painted surface.
ii. For pumps, motors and compressors measurement shall be made on number basis.
b) PAINTING ON PIPING INCLUDING SPECIALS AND FITTINGS
i. Payment will be made on linear measurement in ‘Metres’ corrected to the nearest
centimeter.
ii. Piping shall be measured along the centre line through all types of fittings and flanges.
iii. Rates for painting of pipes shall be inclusive of painting of all types of pipe supports,
flanges, guides, shoes, saddles, clamps, etc and also all types of fittings except valves (2"
and above) which shall be paid separately on number basis.
iv. There will be no separate measurements of the colour bands/ identification signs (line
numbering), flow direction etc. on uninsulated piping, the rats of painting of linear length
of piping shall be inclusive of cost of such items.
c) PAINTING ON STEEL STRUCTURE
i. Payment for steel structures shall be made on the basis of admissible weight of structure
painted.
ii. Welds, bolts, nuts, washers etc. shall not be measured and rates for painting of structure
shall be inclusive of painting such items.
CONSTRUCTION ACTIVITIES
The various common activities in
construction are as under:
Excavation
Scaffolding, Platforms & Ladders
Structural Work, Laying of
Reinforcement & Concreting
Road Work (Laying of roads)
Cutting /Welding
Working in Confined Space
Proof/Pressure Testing
Working at Heights
Handling & Lifting Equipments
Vehicle Movement
Electrical
Offshore
Demolition
Radiography
Sand/shot blasting/ spray
painting
Work above water