Академический Документы
Профессиональный Документы
Культура Документы
ECONO-BEAM Features
• Small, low cost, self-contained sensors engineered to provide reliable sensing, primarily in straightforward OEM applications
• Simple installation with no adjustments
• 10 to 30V dc operation
• Bipolar outputs (one NPN and one PNP); each output rated at 150 milliamps
• Choose models for light operate or dark operate
• Totally solid-state and epoxy-encapsulated for unlimited life
• Very compact, yet rugged enough to withstand tough sensing environments; rated IP66, NEMA 4X
Due to their small size, right-angle design, and unique shape, this sensor pair is ideal for mounting
against the side rails of conveyors for use in flow control and product sensing, and are an excellent
choice for use on supermarket checkout stands. They may be bolted face-to-face to form a powerful
slot sensor for edgeguiding of opaque materials or for sensing gear teeth, timing rings, or “flags,” with
enough excess gain to operate even in the dirtiest sensing environments. Infrared, 880 nm
Effective Beam: 3 mm
1000
Bipolar
SE61E E
NPN/PNP X Opposed Mode 300 mm
Opposed Mode
12 in
SE61R C
LO E 100
200 mm 8 in
100 mm 4 in
S
0 0
1.8 m S
2 m (6.5') 10-30V dc 100 mm 4 in
(6') G 10
200 mm 8 in
A
300 mm 12 in
I
Bipolar N
SE61E 0 .6 m 1.2 m 1.8 m 2.4 m 3.0 m
NPN/PNP 1
2 ft 4 ft 6 ft 8 ft 10 ft
SE61RNC 0.01 m 0.1 m 1m 10 m
DISTANCE
DO 0.033 ft 0.33 ft 3.3 ft 33 ft
DISTANCE
*NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SE61RNC W/30).
• High-speed models may be ordered by adding suffix “MHS” to the model number of any standard ECONO-BEAM dc sensor (e.g., SE61EMHS).
Response time for these sensors decreases to 1 millisecond; faster response comes at the expense of lower excess gain.
Bipolar 1000
SE612LV NPN/PNP E
X Retroreflective Mode
LO C With BRT-3 Reflector 150 mm
Retroreflective Mode
6 in
100
E 100 mm 4in
S
4.5 m S
50 mm 2 in
2 m (6.5') 10-30V dc 0 With BRT-3 Reflector 0
(15') G 10
50 mm 2 in
A 100 mm 4 in
I
Bipolar N 150 mm 6 in
SE612LVNC NPN/PNP 1
0.01 m 0.1 m 1m 10 m 0 .9 m 1.8 m 2.7 m 3.6 m 4.5 m
3 ft 6 ft 9 ft 12 ft 15 ft
DO 0.033 ft 0.33 ft 3.3 ft 33 ft
DISTANCE
DISTANCE
† Specified using model BRT-3 retroreflector (3" diameter). Actual range may vary depending on retroreflector size and efficiency.
Ideal for applications where the target’s reflectivity and profile are sufficient to return a large percentage of the
emitted light back to the sensor. Divergent diffuse model SE612W is particularly useful for sensing transparent or
translucent objects (clear plastic or glass) and for dependable sensing of irregular surface features; its excess gain
falls off sharply beyond 1". As a result, it may be used when it is necessary to ignore background objects. Infrared, 880 nm
Bipolar E
X 7.5 mm Diffuse Mode 0.3 in
SE612D NPN/PNP C
Diffuse Mode
5.0 mm 0.2 in
100
E
LO S 2.5 mm 0.1 in
S
200 mm 0 0
E
22.5 mm Divergent Mode 0.9 in
X Divergent Mode
Bipolar C
100
15 mm 0.6 in
E 7.5 mm 0.3 in
SE612W NPN/PNP S
0 0
S
LO 7.5 mm 0.3 in
76 mm G 10
15 mm 0.6 in
2 m (6.5') 10-30V dc A
(3") I
22.5 mm 0.9 in
Bipolar N
0 25 mm 50 mm 75 mm 100 mm 125 mm
SE612WNC NPN/PNP 1
0.1 mm 1 mm 10 mm 100 mm
1.0 in 2.0 in 3.0 in 4.0 in 5.0 in
DISTANCE
DO 0.004 in 0.04 in 0.4 in 4 in
DISTANCE
E SE612C
X SE612C
Bipolar C
Convergent Mode
15 mm Convergent Mode 0.6 in
100
E
SE612C NPN/PNP S
10 mm 0.4 in
5 mm 0.2 in
LO S
0 0
12 mm G 10 5 mm 0.2 in
2 m (6.5') 10-30V dc A
(0.5") I
10 mm 0.4 in
Bipolar N 15 mm 0.6 in
SE612CNC NPN/PNP 1
0.1 mm 1 mm 10 mm 100 mm
0 15 mm 30 mm 45 mm 60 mm 75 mm
0.6 in 1.2 in 1.8 in 2.4 in 3.0 in
DO 0.004 in 0.04 in 0.4 in 4 in
DISTANCE
DISTANCE
SE612CV
E SE612CV
X 3 mm Convergent Mode 0.12 in
Convergent Mode
16 mm Bipolar C
E 100
2 mm 0.08 in
1 mm 0.04 in
SE612CV (0.65") NPN/PNP S
S 0 0
LO 1 mm 0.04 in
G 10
Spot Size 2 m (6.5') 10-30V dc A 2 mm 0.08 in
I 3 mm 0.12 in
at Focus: Bipolar N
SE612CVNC 1.2 mm NPN/PNP 1
0.1 mm 1 mm 10 mm 100 mm
0 7.5 mm
0.3 in
15 mm 22.5 mm 30 mm 37.5 mm
0.6 in 0.9 in 1.2 in 1.5 in
*NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SE612C W/30).
• High-speed models may be ordered by adding suffix “MHS” to the model number of any standard ECONO-BEAM dc sensor (e.g., SE612CMHS).
Response time for these sensors decreases to 1 millisecond; faster response comes at the expense of lower excess gain.
Ideal for situations where hostile environments or space restrictions prohibit placing the sensor itself in the sensing
position. The response time required by model SE612F is 10 milliseconds (0.01 seconds). If fast-moving objects are
to be detected, select a fiber optic assembly which senses the object for a long period of time. (For example, a
bifurcated fiber optic with a rectangular bundle termination like model BR2.53S may be positioned so that the object
is detected while it passes along the entire length of the rectangular sensing area.) Not recommended for
applications requiring bending or repeated flexing of fibers. Infrared, 880 nm
E SE612F
X 75 mm
SE612F 3 in
Opposed Mode
C Opposed Mode
100 50 mm 2 in
E
S IT23S Fibers 25 mm 1 in
Bipolar S 0 IT13S IT23S 0
SE612F NPN/PNP G 10
25 mm 1 in
LO A
IT13S Fibers
50 mm 2 in
I 75 mm 3 in
N
Range 1 0 100 mm 200 mm 300 mm 400 mm 500 mm
varies by 1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
4 in 8 in 12 in 16 in 20 in
DISTANCE
sensing DISTANCE
mode 2 m (6.5') 10-30V dc
1000
and fiber SE612F
E
optics X Diffuse Mode
1.9 mm
SE612F
0.075 in
0.65 mm 0.025 in
SE612FNC NPN/PNP BT23S Fiber
1.3 mm 0.050 in
G 10
DO A 1.9 mm 0.075 in
I
N BT13S Fiber
0 7.5 mm 15 mm 22.5 mm 30 mm 37.5 mm
1 0.3 in 0.6 in 0.9 in 1.2 in 1.5 in
1 mm 10 mm 100 mm 1000 mm DISTANCE
.04 in .4 in 4 in 40 in
DISTANCE
*NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SE612F W/30).
• High-speed models may be ordered by adding suffix “MHS” to the model number of any standard ECONO-BEAM dc sensor (e.g., SE612FMHS).
Response time for these sensors decreases to 1 millisecond; faster response comes at the expense of lower excess gain.
An excellent option where sensing must be accomplished in tight, inaccessible or volatile areas. Fibers withstand
vibration and shock and are immune to electrical noise. Plastic fibers function well at temperatures between -30°
and +70°C (-20°F to +158°F), and stand up to repeated flexing. Most are easy to shorten in the field, to develop
Visible red, 650 nm custom installations. Not recommended for severe environments.
E SE612FP
X Opposed Mode SE612FP
C Plastic Fibers 45 mm
Opposed Mode
1.8 in
100
E Plastic Fibers
30 mm 1.2 in
S
Bipolar S 15 mm .6 in
SE612FPNC NPN/PNP G 10
1.2 mm .05 in
2.4 mm .10 in
DO A
I 3.6 mm .15 in
N PBT26U Fiber
1 0 7.5 mm 15 mm 22.5 mm 30 mm 37.5 mm
.3 in .6 in .9 in 1.2 in 1.5 in
0.1 mm 1 mm 10 mm 100 mm
0.004 in 0.04 in 0.4 in 4 in DISTANCE
DISTANCE
*NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., SE612FP W/30).
• High-speed models may be ordered by adding suffix “MHS” to the model number of any standard ECONO-BEAM dc sensor (e.g.,
SE612FPMHS). Response time for these sensors decreases to 1 millisecond; faster response comes at the expense of lower excess gain.
ECONO-BEAM DC Specifications
Supply Voltage and Current 10 to 30V dc (10% maximum ripple) at less than 20 mA (exclusive of load)
Supply Protection Circuitry Protected against reverse polarity and transient voltages
Output Configuration Bipolar: One current sourcing (PNP) and one current sinking (NPN) open-collector transistor
Repeatability 0.4 ms; MHS models 0.06 ms; independent of signal strength.
Indicators All models except emitter-only units have a top-mounted LED indicator that lights whenever the receiver
“sees” its modulated light source.
Construction Reinforced thermoplastic polyester (models LV, CV, F and FP) or polycarbonate (other models) housing,
totally encapsulated for protection against moisture, vibration and corrosion.
Environmental Rating Meets NEMA standards 1, 3, 3S, 4, 4X, 12, and 13; IEC IP66
ECONO-BEAM DC Hookups
ECONO-BEAM DC Dimensions
Opposed Mode Diffuse & Divergent Mode
(model suffix E & R) (model suffix D & W)
LED Indicator (Receiver Only)
13.7 mm 15.2 mm
(0.54") (0.60")
6.4 mm
31.8 mm (0.25") 38.1 mm
(1.25") 19.1 mm
(1.50") LED Indicator
(0.75")
10.2 mm
16.5 mm (0.40")
9.7 mm
(0.65")
(0.38")
5.1 mm (0.20")
3.1 mm (0.12") 12.7 mm
12.7 mm
(0.50")
(0.50")
12.7 mm
(0.50")
6.1 mm (0.24")
30.0 mm 33.0 mm
(1.18") (1.33")
14.4 mm
14.4 mm (0.56")
(0.56")
M18 x 1 x 15 mm Thread
(Mounting Nut Supplied)
38.6 mm
(1.52")
22.9 mm
(0.90") 24.9 mm 11.9 mm (0.47")
(0.98")
15.2 mm
(0.60")
14.4 mm
(0.56")
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 888.373.6767 • www.baneng.com • E-mail: sensors@baneng.com