Академический Документы
Профессиональный Документы
Культура Документы
COMPULSORY
Answer : Incorrect
rock – gas – oil - fresh water - salt water
5. Look at this picture!
This is a graph that show about gas lift design. What is number 1, 2, and 3 ?
Answer :
1. Kick-off Point (Pko)
2. Point of injection
3. Point of balance
6. Mention 3 parameters which measure at Special core analysis!
Answer :
Pore volume compressibility, formation resistivity factor, cementation factor,
cementation exponent, resistivity index, water saturation, saturation exponent,
relative permeability, Capillary pressure, waterflood susceptibility
FINAL ROUND
COMPULSORY
7. A well is producing oil with 2250 bpd flowrate. Its Productivity Index (PI) is known
at 2.5 STB/day/psi, and currently has 850 flowing pressure (Pwf). Calculate its
static pressure (Ps)!
Answer :
J = Q/(Ps-Pwf) = 900 Psi
(Ps-Pwf) = Q/J Ps – 850 = 900
= 2250/2.5 Ps = 900 + 850 = 1750 Psi
8. Explain the difference between the drainage and imbibition processes! (tarek)
Answer :
Drainage process : The process of generating the capillary pressure curve
by displacing the wetting phase, i.e., water, with the nonwetting phase
(such as with gas or oil).
Imbibition Process : The other principal flow process of interest involves
reversing the drainage process by displacing the nonwetting phase (such
as with oil) with the wetting phase, (e.g., water).
1. Badger Bit,
2. Spud Bit,
3. Knuckle Joint,
4. Whipstock,
5. Turbodrill,
6. Dynadrill,
7. Bent Sub
10. Friedrich Mohs in 1812 defined 10 levels of mineral hardness. Arrange 10 minerals
based on Mohs scale,from rock that has the lowest hardness up to highest !
Answer :
FINAL ROUND
COMPULSORY
1. Talc
2. Gypsum
3. Calcite
4. Fluorite
5. Apatite
6. Feldspar
7. Quartz
8. Topaz
9. Corundum
10. Diamond