Академический Документы
Профессиональный Документы
Культура Документы
Low Tensile Strength and Elongation at break Much high Tensile Strength and Elongation at break
Standard Length is up to 2 meters only Long length available as per client requirement
Much heavier and bulky due to high thickness (8mm , Much light weight and easy to handle due to low
10mm, 12mm, 20mm and 25mm) thickness (2mm, 2.5mm and 3mm)
Note: The BIS has converted the old IS 5424:1969 due to above mentioned limitations by new IS 15652:2006,
The conversion letter issued by the BIS to all manufacturer of old IS is attached herewith.
You may verify this information at BIS Website: http://www.bis.org.in/qazwsx/cmd/CMDIII1615652.pdf
As per BIS norms it is illegal to Manufacturer or to Sell or to Purchase Electrical Rubber mats as per old IS i.e. 5424:1969.
Shock Proof - Electrical Insulation Mats, ISI marked - IS: 15652:2006
BIS, CPRI, NTH & ERDA approved WITH GENUINE TEST CERTIFICATE,
Superseding IS: 5424:1969 (Old standard)
Overview: An Electrical Insulation mat protects from Electric Shocks when working near Electrical Panels.
Dear User,
As per the Gazette notification, it is illegal to use Outdated rubber mats near Electrical panels.
These mats should be replaced to the mats confirming to the current Govt.standards of IS-15652:2006.
To verify this information, you may visit BIS website: http://www.bis.org.in/qazwsx/cmd/CMDIII1615652.pdf
During the period up to 31 Oct,2007 applications may be recorded and processed for GOL as per IS 5424:1969 .
An undertaking may be obtained from the firm that the action required for switchover to IS-15652:2006 shall be
completed before 1st November 2007.
IS 15652:2006 AND STI Doc:STI/15652/1, November 2007 WILL BE IMPLIMENTED WITH EFFECT FROM
1st November 2007.
All ROs/BOs are requested to take necessary action. STI can be downloaded from BIS Intranet.
(Rajeev Sharma)
Scientist D (CMD-III)