Академический Документы
Профессиональный Документы
Культура Документы
The
SL150 Mark for Review
supports (1) Points
the
following
drives:
T10KD
Correct!
2. To increase customer ease of use, all but which of the following are Customer
Replaceable Units of the SL150? Mark for Review
(1) Points
Power Supplies
Operator Panel
Robot Module
Correct!
3. The HP Library and Tape Tool (LTT) diag tool will allow you to:
Mark for Review
(1) Points
Correct!
Correct!
5. Basic library initialization performed from the touch screen of the SL150 front
control panel involves the following tasks: Mark for Review
(1) Points
Creating a partition
Correct!
1. The
SL150 Mark for Review
supports (1) Points
the
following
drives:
T10KD
Correct!
2. To increase customer ease of use, all but which of the following are Customer
Replaceable Units of the SL150? Mark for Review
(1) Points
Power Supplies
Operator Panel
Robot Module
Correct!
3. The HP Library and Tape Tool (LTT) diag tool will allow you to:
Mark for Review
(1) Points
Correct!
Correct!
5. Basic library initialization performed from the touch screen of the SL150 front
control panel involves the following tasks: Mark for Review
(1) Points
Creating a partition
Correct!
6. What
features Mark for Review
does the (1) Points
new
library
GUI in
the
Remote
Browser
Interface
include
in the
SL150?
Organize magazines
Correct!
7. The SL150 library can be divided into a maximum of how many partitions with
each havingat least one tape drive and one magazine? Mark for Review
(1) Points
8 (*)
12
password
changeme
passw0rd (*)
null
Correct!
9. The SL150 remote browser graphical user interface can be used to configure the
following tasks: Mark for Review
(1) Points
Correct!
SL500, SL3000
SL700, SL500
Correct!
nine (*)
four
three
two
OKM encryption with the SL150 became available with the LTO6
Correct!
13. Which version of the SNMP standard are supported by the SL150 library?
Mark for Review
(1) Points
Version 2c only
Version 3 only
Correct!
14. Which of the following StorageTek tape libraries are currently customer
installable? Mark for Review
(1) Points
Correct!
15. Which of these elements cannot be proactively monitored with the SL150
Mark for Review
(1) Points
Correct!
16. The SCSI
Fibre Mark for Review
Channel (1) Points
Protocol
is also
referred
to as
which of
the
following
?
IPPI
ESCON
FCP (*)
ATM
Correct
The protocol
Correct
18. A World Wide Name is divided into three sections. What is described in Section 2
? Mark for
Review
(1) Points
Correct
19. In a library, how are the World Wide Names assigned ?
Mark for
Review
(1) Points
A switch
A director
A hub (*)
A terminal
Correct
21. In a fabric
topology, Mark for Review
which (1) Points
device
should
you
power up
first ?
The host
The disk
Correct
22. When a tape drive in a fabric network is powered on, what is the next step in
the sequence required for it to be able to operate as part of the network ? Mark for
Review
(1) Points
Process Login (PRLI)
Fabric registration
Correct
Ethernet cables
Only hubs
Correct
24. If you were to connect a MAGMA box directly to a tape drive using a fiber cable,
you establish what type of connection ? Mark for
Review
(1) Points
Private loop
Point-to-point (*)
Public loop
Fabric
25. In a Fibre Channel network, a Node can best be described as which of the
following ? Mark for
Review
(1) Points
A disk
An optical connection
Incorrect. Please refer to the “StorageTek
StorageTek Fibre Channel Fundamentals for Tape
Drives” course for more information.
26. What will be
the indication Mark for Review
when the (1) Points
drive is
performing an
Initial
Program Load
(IPL) or
initialization?
The LED will have a solid red light until the load is complete
The LED will flash red slowly for about two minutes (*)
The LED will have a fast amber flash until the load is complete
27. Which Oracle media type uses a single hub design with media wound
around a take-up reel and positioned in front of the read-write head? Mark for
Review
(1) Points
Total bytes read and written to the cartridge and number of files on
tape
Last 5 mounts statistics
End of Data block number and position
The physical address of the last mounted tape drives (*)
Correct
Ethernet Fundamentals
(Answer all questions in this section)
RJ45 (*)
D Style
N_Port
RS-422
Correct
8 bytes
128 bytes
32 bytes
64 bytes (*)
16 bytes
32. What is the primary purpose of the tape drive Ethernet interface ?
Mark for
Review
(1) Points
Correct
33. What Web site contains a list of part numbers for the MAGMA box and host bus
adapter (HBA) circuit cards? Mark for
Review
(1) Points
Primus database
MPSS page
34. The 24GB Streaming Test has completed. How do you obtain the detailed
read/write statistics? Mark for
Review
(1) Points
35. What type of teminator would you use with an LTO Generation 3 SCSI tape
drive to ensure the maximum data transfer rate? Mark for
Review
(1) Points
Single ended
Zero
Two (*)
Three
One
Correct
True (*)
False
Correct
38. Which version of the Oracle System Handbook does not provide support related
information? Mark for
Review
(1) Points
Internal
Public (*)
Partner
Correct
39. In the Oracle System Handbook, how are Field Replaceable Units marked?
Mark for
Review
(1) Points
With a[ C]
With an [S]
With a [$]
With a [&]
40. To find the latest firmware version of the LTO6 tape drive, which two tools
would you look in on the https://tapesupport.us.oracle.com/ site? Mark for
Review
(1) Points
(Choose all correct answers)
Reference/Firmware Version/OEM Code Version (*)
Reference/FSCLookuptool/StorageTek Drives
Incorrect.
Please refer
to the Tape
Automation
Troubleshooti
ng and Repair
course for
more
information.
Troubleshooting
Incorrect.
Please refer
to the Tape
Automation
Troubleshooti
ng and Repair
course for
more
information.
code_version_verde.tgz
verde.tgz (*)
550_verde.bin
vErd_SL500_ver.bin
Incorrect.
Please refer
to the SL500
Service and
Support
ourse for
more
information.
Incorrect.
Please refer
to the SL500
Service and
Support
ourse for
more
information.
Initialization (*)
Drive Communication
Mount
Audit
Correct
46. How does
the library Mark for Review
start an (1) Points
Initialization
Sequence?
Initialization occurs when the library is directed by the user using the
backup software interfacing with the library
Initialization occurs when the robot is fully seated
Initialization only occurs when the front door is opened and closed
47. The library base unit contains one or two tape drives. Drive expansion
modules, which can hold one to four tape drives, can be added to the rack to Mark for
increase the number of total tape drives. What is the maximum number of Review
tape drives in a rack?
(1) Points
24
20
16
18 (*)
10
A card key