Вы находитесь на странице: 1из 4

416E Backhoe Loader Single Tilt LMS00001-UP (MACHINE) POWERED BY C4.4 E...

Página 1 de 4

Cerrar SIS

Pantalla anterior

Producto:  BACKHOE LOADER


Modelo:  416E BACKHOE LOADER LMS00556
Configuración: 416E Backhoe Loader Single Tilt LMS00001-UP (MACHINE) POWERED BY C4.4 Engine

Especificaciones
C4.4 (Mech) Engines for Caterpillar Built Machines
Número de medio -KENR9208-02 Fecha de publicación -01/03/2010 Fecha de actualización -17/03/2010

i02709983

Fuel Injection Pump


SMCS - 1251; 1290

Número de pieza - 315-3382


S/N - HXB1-UP

Número de pieza - 315-3382


S/N - DXC1-UP

Número de pieza - 326-8993


S/N - MFG1-UP

Número de pieza - 325-1074


S/N - TMS1-UP

Número de pieza - 249-9226


S/N - DSK1-UP

Número de pieza - 326-8993


S/N - LMS1-UP

Número de pieza - 315-3382


S/N - PCR1-UP

Número de pieza - 315-3382


S/N - RXS1-UP

Número de pieza - 315-3382


S/N - SXB1-UP

Número de pieza - 326-8993


S/N - BWC1-UP

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 08/11/2011
416E Backhoe Loader Single Tilt LMS00001-UP (MACHINE) POWERED BY C4.4 E... Página 2 de 4

Note: Before the fuel injection pump is removed from the engine the fuel injection pump shaft must
be locked. Position the engine to TC compression stroke of number one cylinder before tightening the
locking screw. The locking screw will prevent the shaft from rotating. If the fuel injection pump was
removed prior to correctly timing the engine and locking the shaft, the fuel injection pump will need
to be timed by trained personnel.

Illustration 1 g01352237

Typical example

Note: The solenoid on the fuel injection pump is a serviceable item. The fuel injection pump is a
nonserviceable item.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 08/11/2011
416E Backhoe Loader Single Tilt LMS00001-UP (MACHINE) POWERED BY C4.4 E... Página 3 de 4

(1) O-ring

(2) Locking screw

(3) Washer

Locking the shaft

Loosen locking screw (2) and move the washer (3) to the locked position. Tighten the bolt to
the following torque. ... 17 N·m (12 lb ft)

Unlocking the shaft

Loosen locking screw (2) and install the washer (3) to the unlocked position. Tighten the bolt to
the following torque. ... 12 N·m (9 lb ft)

Illustration 2 g01352239

Typical example of a support bracket

(4) Tighten the mounting bolt to the following torque. ... 44 N·m (32 lb ft)

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 08/11/2011
416E Backhoe Loader Single Tilt LMS00001-UP (MACHINE) POWERED BY C4.4 E... Página 4 de 4

(5) Tighten the mounting bolt and the nut to the following torque. ... 22 N·m (16 lb ft)

Note: The support bracket must be installed after the coolant pump is installed. In order to stop the
distortion of the timing case, finger tighten the bolt (4) and then tighten the nut and bolt (5). Tighten
the bolt (4) .

Tighten the bolts that hold the fuel pump to the front housing to the following torque. ... 25 N·m (18
lb ft)

Copyright 1993 - 2011 Caterpillar Inc. Tue Nov 8 10:11:21 EST 2011
Todos los derechos reservados.
Red privada para licenciados del SIS.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 08/11/2011

Вам также может понравиться