Академический Документы
Профессиональный Документы
Культура Документы
91
Submitter Email: derekfoster@magneticsdesigns.com
Type of Project: Revision to IEEE Standard C57.12.91-2011
PAR Request Date: 17-Dec-2015
PAR Approval Date: 03-Mar-2016
PAR Expiration Date: 31-Dec-2020
Status: PAR for a Revision to an existing IEEE Standard
Root Project: C57.12.91-2011
2.1 Title: Standard Test Code for Dry-Type Distribution and Power Changes in title: IEEE Standard Test Code for Dry-Type Distribution
Transformers and Power Transformers
3.1 Working Group: Dry Type Transformers - Test Code Working Group (PE/TR/DryType-WGC57.12.91)
Contact Information for Working Group Chair
Name: Derek Foster
Email Address: derekfoster@magneticsdesigns.com
Phone: 815-678-2421
Contact Information for Working Group Vice-Chair
None
3.2 Sponsoring Society and Committee: IEEE Power and Energy Society/Transformers (PE/TR)
Contact Information for Sponsor Chair
Name: Stephen Antosz
Email Address: santosz@ieee.org
Phone: 724-873-2153
Contact Information for Standards Representative
Name: James Graham
Email Address: jimgraham@ieee.org
Phone: 412-478-4450
5.1 Approximate number of people expected to be actively involved in the development of this project: 30
5.2 Scope: This standard describes methods for performing tests Changes in scope: This standard describes methods for performing
specified in IEEE Std C.57.12.01 and other referenced standards tests specified in IEEE Std C57C.57.12.01(TM) and other referenced
applicable to dry-type distribution and power transformers, with a standards applicable to dry-type distribution and power transformers,
voltage of 601V or higher in the highest voltage winding. It is intended with a voltage of 601V or higher in the highest voltage winding. It is
for use as a basis for performance, and the proper testing of dry-type intended for use as a basis for performance, safety, and the proper
distribution and power transformers. testing of dry-type distribution and power transformers. This standard
applies to all dry-type transformers including those with solid cast
This standard applies to all dry-type transformers including those with and/or resin encapsulated windings except instrumentas follows: a)
solid cast and/or resin encapsulated windings except as follows: Instrument transformers, stepb) Step-voltage and induction voltage
a) Instrument transformers regulators, arcc) Arc furnace transformers, rectifierd) Rectifier
b) Step-voltage and induction voltage regulators transformers, specialtye) Specialty transformers, andf) mineMine
c) Arc furnace transformers transformers. g) Testing Transformers h) Welding Transformers
d) Rectifier transformers
e) Specialty transformers
f) Mine transformers
g) Testing Transformers
h) Welding Transformers
1
5.3 Is the completion of this standard dependent upon the completion of another standard: No
5.4 Purpose: The purpose of this standard is to provide information regarding the procedures for the testing of dry-type transformers.
Transformer requirements and specific test criteria are not a part of this standard but are contained in appropriate standards such as IEEE Std
C57.12.01 or in user specifications.
5.5 Need for the Project: Since publication of the last revision of this standard, it has been recognized that some test procedures described in
the standard are no longer used, or are performed in a different way or with different test equipment to that described.
5.6 Stakeholders for the Standard: The stakeholders of this standard include the users (electric utilities, industrial and commercial facilities)
and manufacturers of dry type distribution and power transformers.
Intellectual Property
6.1.a. Is the Sponsor aware of any copyright permissions needed for this project?: No
6.1.b. Is the Sponsor aware of possible registration activity related to this project?: No
8.1 Additional Explanatory Notes (Item Number and Explanation): 5.2: The full title of IEEE Std C57.12.01 is IEEE Standard for General
Requirements for Dry-Type Distribution and Power Transformers