Академический Документы
Профессиональный Документы
Культура Документы
DCS/CCR OPERATOR
( OIL AND GAS)
Nationality : Indian.
Languages Known : English, Tamil, EXP: Aug 2013 to May 2019 PRODUCTION OPERATOR
- QNFS-Qatar
hindi.
EXP: June 2011 to May 2013 PRODUCTION OPERATOR
Passport Number: K7221598 . - KOC
Maintain perform production operation activities in existing wells and facilities to high integrity
standards.
Supervised oil operation in oil and gas production and water injection and the operation of
production and injection facilities on the well head platforms and maintain close liaison with
the Field Control Centre (FCC), notifying the center of field changes.
Managed day-to-day well head activities with high risk operation activities with a strong focus
on safety and environmental issues
Supervised production testing of oil and gas well-heads capability to meet production targets
and quantity and quality analysis using continues data monitoring from testing units.
Approved and issued work permits, prepare equipment for work and afer work is completed,
review maintenance work and test equipment and prepare it for safe operation.
Supervised and performed standing instructions and working procedures and HSE requirements
for safe and continuous production.
operation activities related Test computer to ensure proper functioning of computer systems
CURRENT RESPONCIBILITIES:
Taking regular round of unit to ensure safe oil operation of the plant.
Clear and understandable communication with CCR.
Logging of process parameters on hourly basis and reporting to field engineer and panel operator
about any abnormalities.
Following proper housekeeping to ensure clean and safe work area
First line maintenance like Glycol particulate/ charcoal filter replacement, Purging of pressure, level
and flow transmitters and gland tightening of Glycol pumps, strainer cleaning of pumps etc.
Monitor the pulse / vibration of different equipment in my section mainly the rotary machines.
Familiar with the behavior, sound, temperature and vibration of rotating equipment in my area and
also perform correction by self-adjustment to prevent the interruption of system operation or call
for maintenance to save the equipment from damages.
Sampling of various products for laboratory testing.
Pig launching and receiving. Well head operation from field mounted panels, Methanol and CI
Injection
Ensuring strict compliance with safety procedures, work permit procedure.
Start up, Shut down and Change over, handing & taking over of Compressors, pumps, steam
turbines, filters and exchangers.
Preparation of area and equipment before issuance of work permits for Hot, cold, vessel/confined
space work)
Operation of Hydraulic Turbines, Steam Turbine, engine & motor driven Multistage Centrifugal
Pumps and reciprocating compressors
Adjustment of process parameters through field mounted Pneumatic Fisher controllers (at some
locations)
Condensate and LPG loading in Bowsers. Oil level makeup in pumps and in day tanks of compressor.
Member of the emergency response team.
Participated in the development of safe SIMOPS operating procedures.
Prepared job packs for the area, which include the isolations list, safety pre job check list,
commissioning procedures, P & ID marking, punch listing, Blowing, Nitrogen Purging, Pressure and
Leak Testing. etc.
Safety apparatus Handled:
Handled (BF25) (I-BRID) infra-red gas detector for continuous gas monitoring, (MX6) methane
gas detector, escape set, parrot mask, SCBA-Self-contained breathing apparatus for handling
critical jobs ,live line to work long time in H2s.
Safety:
Follows all golden rules and guidelines established by the offshore, onshore and actively
participates in safety meetings, safety programs.
Having good knowledge and control in Permit to Work, Safe Job Plan/Job Safety Analysis,
MOC, Material Safety Data Sheet, Tool Box talks and Hazards & Hazards control and Imparts
job knowledge & training to my team in the fields. (LEL) Lowest explosion limit, (LOTO) lock
out and tag out (NORM) normally occurring radioactive materials, their hazard study and
control measures,(RAM) risk assessment management, personal safety management system
also in (ALARP) & (SIMOPS).
Lead meetings & discussed all jobs in details with Fellow Managers, Engineers and Supervisors
in upstream.
Maintained awareness and control well pad operations and actively intercepting individuals
entering the well pad, ensure all are aware of the current state of operations.
Approve PTW and evaluate (OCL) occupational exposure limit, (LEL) Lowest explosion limit,
(LOTO) lock out and tag out (NORM) normally occurring radioactive materials, their hazard
study and control measures, (RAM) risk assessment management, personal safety management
system also in (ALARP) as low as reasonably practicable. (SIMOPS) Simultaneous operation and
management system
Supervised SIMOPS activities and performed periodical test programs and monitor well
performance in low,high pressure onshore, offshore, sweet ,sour gas in oil & gas wells.
Having exposure to complex and hazardous H2S and CO2 process operations.
Handled (BF25) (I-BRID) infra-red gas detector for continuous gas monitoring, (MX6) methane
gas detector, escape set, parrot mask, SCBA- ,live line to work long time in H2s.
CERTIFICATION:
I hereby declare that the above particulars furnished by me are true to the best of
my knowledge and belief. I assure you sir, if I get a chance, I will execute my work to the fullest
satisfaction of my superiors.
(SRI RAMRAJ.G)