Академический Документы
Профессиональный Документы
Культура Документы
exclusively from
SEMI - CUSTOM
Kitchen & Bath Cabinetry
Limited Lifetime Warranty
Ideal Cabinetry® (warrantor) warrants to the original consumer purchaser, that all products manufactured or supplied
by warrantor will be free from defects in material and workmanship. This warranty is for your lifetime as long as you
own the cabinetry, on product used for Residential Purposes only and is not transferable to
subsequent owners. Proof of Purchase is required.
This warranty does not cover damage resulting from normal wear, accident, misuse or lack of reasonable and
necessary maintenance and service; nor does it warranty the improper installation or unauthorized repair, alteration,
or modification or defects in the product when the product is installed. This warranty is limited to the repair or
replacement of the defective part at the sole discretion of warrantor. Warranty is limited to All Wood Cabinetry
Semi-Custom branded products excluding all electrical components: Excluded items may carry separate
warranties as provided directly by the manufacturer of these products.
It is our option to provide repair parts or replace with functionally equivalent product. Return of product may be
required for replacements. Such repair parts or replacement shall be at warrantor's expense, but customer shall bear
all other expenses, including, but not limited to, cost of removal, transportation, re-installation, communication and
any special service required by customer such as, overtime labor, etc.
Natural woods vary in color and grain pattern and exhibit color change over time. Cabinets may darken or lighten
with age due to exposure to certain environmental conditions including but not limited to sunlight, moisture,
household cleaners, smoke, etc. These variations are considered the natural characteristics of the material and are
not covered under this warranty.
In the event of a warranted product performance issue, submit request including proof of purchase documentation,
specific description of warranty issue (include photos where possible) in writing to:
Warranty Department
210 Century Boulevard
Bartow, FL 33830
EXCEPT TO THE EXTENT PROVIDED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE SHORTER OF THE PERIOD PROVIDED BY LAW OR THE PERIOD OF THIS WARRANTY, AND UNDER
NO CIRCUMSTANCE SHALL IDEAL CABINETRY BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
SUSTAINED IN CONNECTION WITH THE PRODUCT. THE EXPRESS WARRANTY ABOVE CONSTITUTES THE
ENTIRE WARRANTY AND IS IN LIEU OF ALL OTHERS EXPRESSED OR IMPLIED.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how
long an implied warranty lasts, therefore, the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights, which vary from state to state.
INDEMNITY
Ideal Cabinetry shall not be liable for either its failure to perform or its delays in performance hereunder arising out
of or resulting from causes beyond its control, including but not limited to, acts of God, acts of Representation, acts
of Government, wars, fires, floods, epidemics, quarantine, strike, freight embargoes, weather or default by suppliers
due to any such causes.
Table of Contents
Cabinet Construction............................................................................................ 5
Customization Options.......................................................................................... 6
Accessories.................................................................................................... 45-51
PLEASE NOTE: Line drawings are artistic representations of products for general dimensioning purposes.
These should not be relied upon for accurate product appearance. Please consult the website or a designer if
you have any questions or specific design requirements.
Shaker Square Recessed Panel Door Styles
- 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon
framed doors with 5/8" thick solid MDF recessed center panels framed doors with 5/8" thick solid MDF recessed center panels
- 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon
framed drawer fronts with 5/8" thick solid MDF recessed framed drawer fronts with 5/8" thick solid MDF recessed
center panels center panels
- Soft close hinges & full extension drawers with soft close - Soft close hinges & full extension drawers with soft close
- Available in Pacific White painted finish - Available in Pearl Gray painted finish
- Decorative hardware required - Decorative hardware required
- Available with glass doors or open cabinets - Available with glass doors or open cabinets
- 3/4" thick x 3" wide solid birch Shaker style mortise and tenon
framed doors with 5/8" thick birch veneer over MDF recessed - 3/4" thick x 3" wide solid birch Shaker style mortise and tenon
center panels framed doors with 5/8" thick birch veneer over MDF recessed
center panels
- 3/4" thick x 3" wide solid birch Shaker style mortise and tenon
framed drawer fronts with 5/8" thick birch veneer over MDF - 3/4" thick x 3" wide solid birch Shaker style mortise and tenon
recessed center panels framed drawer fronts with 5/8" thick birch veneer over MDF
recessed center panels
- Soft close hinges & full extension drawers with soft close
- Soft close hinges & full extension drawers with soft close
- Available in Cinnamon stain finish
- Available in Manganite stain finish
- Decorative hardware required
- Decorative hardware required
- Available with glass doors or open cabinets
- Available with glass doors or open cabinets
- 3/4" thick x 3" wide solid birch Shaker style mortise and tenon
framed doors with 5/8" thick birch veneer over MDF recessed
center panels
- 3/4" thick x 3" wide solid birch Shaker style mortise and tenon
framed drawer fronts with 5/8" thick birch veneer over MDF
recessed center panels - 3/4" thick, solid MDF raised panel vinyl clad doors
- Soft close hinges & full extension drawers with soft close - 3/4" thick, solid MDF raised panel vinyl clad drawer fronts
- Available in Cabernet stain finish - Soft close hinges & full extension drawers with soft close
- Decorative hardware required - Available in Arctic White vinyl
- Available with glass doors or open cabinets - Decorative hardware required
2 - Not available with glass doors or open cabinets
Square Raised Panel Miter Frame Door Styles
Brighton Polar White (BPW) Lancaster Toffee Glaze (LTG)
- 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed
- 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed doors with 5/8" thick solid birch raised center panels
doors with 5/8" thick solid MDF raised center panels
- 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed
- 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed drawer fronts with 5/8" thick solid birch raised center panels
drawer fronts with 5/8" thick solid MDF raised center panels
- 8" high drawer fronts feature a 2" wide mitered frame
- 8" high drawer fronts feature a 2" wide mitered frame
- Soft close hinges & full extension drawers with soft close
- Soft close hinges & full extension drawers with soft close
- Available in hand-brushed Toffee Glaze finish
- Available in Pacific White painted finish
- Decorative hardware required
- Decorative hardware required
- Available with glass doors or open cabinets
- Available with glass doors or open cabinets
- 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed - 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed doors with
doors with 5/8" thick solid birch raised center panels 5/8" thick solid birch raised center panels
- 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed - 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed drawer
drawer fronts with 5/8" thick solid birch raised center panels fronts with 5/8" thick solid birch raised center panels
- 8" high drawer fronts feature a 2" wide mitered frame - 8" high drawer fronts feature a 2" wide mitered frame
- Soft close hinges & full extension drawers with soft close - Soft close hinges & full extension drawers with soft close
- Available in Cinnamon stain finish - Available in Manganite stain finish
- Decorative hardware required - Decorative hardware required
- Available with glass doors or open cabinets - Available with glass doors or open cabinets
Lexington Cabernet (LCB) FULL Overlay cabinetry is constructed from various pieces of solid wood and
wood veneers. Differences in grain pattern and color should be expected.
Color differences in wood are the result of variations in minerals found in the
soil native to the tree’s origin. Absorption of these minerals will vary by tree
or parts of said tree. In addition, color changes can be experienced due to
different exposure to light. All species of wood will display characteristics such
as knots, pinholes, sap runs, mineral streaks and darkening with age. It is the
natural beauty of wood to exhibit these characteristics and they will be
present throughout your cabinetry.
- 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed Our Toffee Glaze finish features hand applied glaze applied over the base stain
doors with 5/8" thick solid birch raised center panels
which accentuates the door and drawer front profiles. This glazing, combined
- 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed with occasional fly specks, dents, drips and runs is random and intentional in
drawer fronts with 5/8" thick solid birch raised center panels
design to mimic the look of distressed furniture.
- 8" high drawer fronts feature a 2" wide mitered frame
- Soft close hinges & full extension drawers with soft close The Arctic White, Bronze Glaze, Pacific White and Pearl Gray finished
- Available in Cabernet stain finish product features solid wood painted face frames. As with any painted wood
- Decorative hardware required surface, expansion and contraction with changes in climate may cause
- Available with glass doors or open cabinets fractures in the paint surface at joints. This is an acceptable characteristic and
will vary based on climate conditions. In addition, there may be a slight color
shift over time due to continued exposure to both natural and artificial light. 3
Square Raised Panel with Applied Molding Door Styles
Cambridge Polar White (CPW) Haven Biscuit Glaze (HBG)
- 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed
doors with 5/8" thick solid MDF raised center panels and 1" wide doors with 5/8" thick solid MDF raised center panels and 1"
applied mitered MDF accent molding wide applied mitered MDF accent molding
- 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed
drawer fronts with 5/8" thick solid MDF raised center panels and drawer fronts with 5/8" thick solid MDF raised center panels
1" wide applied mitered MDF accent molding and 1" wide applied mitered MDF accent molding
- Soft close hinges & full extension drawers with soft close - Soft close hinges & full extension drawers with soft close
- Available in Pacific White painted finish - Available in Bronze Glaze finish
- Decorative hardware required - Decorative hardware required
- Available with glass doors or open cabinets - Available with glass doors or open cabinets
- 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed
- 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed doors with 5/8" thick solid birch raised center panels and 1"
doors with 5/8" thick solid birch raised center panels and 1" wide applied mitered birch accent molding
wide applied mitered birch accent molding
- 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed
- 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed drawer fronts with 5/8" thick solid birch raised center panels and
drawer fronts with 5/8" thick solid birch raised center panels and 1" wide applied mitered birch accent molding
1" wide applied mitered birch accent molding
- Soft close hinges & full extension drawers with soft close
- Soft close hinges & full extension drawers with soft close
- Available in Cinnamon stain finish
- Available in hand-brushed Toffee Glaze stain finish
- Decorative hardware required
- Decorative hardware required
- Available with glass doors or open cabinets
- Available with glass doors or open cabinets
- 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed - 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed
doors with 5/8" thick solid birch raised center panels and 1" doors with 5/8" thick solid birch raised center panels and 1"
wide applied mitered birch accent molding wide applied mitered birch accent molding
- 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed - 2-3/8" wide x 3/4" thick solid birch mortise and tenon framed
drawer fronts with 5/8" thick solid birch raised center panels drawer fronts with 5/8" thick solid birch raised center panels
and 1" wide applied mitered birch accent molding and 1" wide applied mitered birch accent molding
- Soft close hinges & full extension drawers with soft close - Soft close hinges & full extension drawers with soft close
- Available in Manganite stain finish - Available in Cabernet stain finish
- Decorative hardware required - Decorative hardware required
- Available with glass doors or open cabinets - Available with glass doors or open cabinets
4
Standard Cabinet Construction
Lifetime
Manufacturer
Warranty
7
Wall Cabinets
WALL CABINET CODING 15" High Double Door
CUSTOM
STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) DEPTH
W 30 30 W 36 24 18 ", 36"
W3015
30", 33
W3315
Cabinet Cabinet Cabinet Cabinet Cabinet Cabinet Cabinet W3615
Code Width Height Code Width Depth Height
15"
· All wall cabinets are 12" deep unless otherwise noted.
Actual height of 24" high cabinets is 23½" overall.
Refrigerator wall cabinets are 24" deep.
· Cabinet depth does not include door thickness 12"
· Products are available in all door styles unless
stated otherwise
· Standard cabinet exterior is unfinished veneer, exposed
sides require Finished Ends or Matching End Panels - No adjustable shelf
• CUSTOM DEPTH: 5" to 15" deep
· Soft close hinges
12" High Double Door 15" High x 24" Deep Double Door
CUSTOM CUSTOM
DEPTH ", 36"
DEPTH
30", 33
W2412 W302415
", 36" W3012 W332415
24", 30
W3612 15" W362415
12"
24"
12"
- No adjustable shelf
- No adjustable shelf - Must be installed between two cabinets, cabinet and wall,
• CUSTOM DEPTH: 5" to 15" deep or supported by refrigerator panels (RP)
• CUSTOM DEPTH: 16" to 23" deep
12" High x 24" Deep Double Door 18" High Double Door
CUSTOM CUSTOM
DEPTH DEPTH
", 3 6"
", 36" 24", 30
24”, 30 W242412 W2418
W302412 W3018
W362412 W3618
12"
18"
24"
12"
- No adjustable shelf
- Must be installed between two cabinets, - No adjustable shelf
cabinet and wall, or supported by
refrigerator panels (RP) • CUSTOM DEPTH: 5" to 15" deep
8 • CUSTOM DEPTH: 16" to 23" deep
Wall Cabinets
18" High x 24" Deep Double Door 30" High Single Door
CUSTOM CUSTOM
", 36"
DEPTH 9", 12", 1
5", 18", 2
1"
DEPTH
24”, 30
W242418 SPECIFY
RIGHT or LEFT HINGED
W302418
W0930
18"
W362418 30"
W1230
W1530
W1830
24"
12" W2130
- No adjustable shelf - Two adjustable shelves
- Must be installed between two cabinets, cabinet and wall, • CUSTOM DEPTH: 5" to 15" deep
or supported by refrigerator panels (RP)
• CUSTOM DEPTH: 16" to 23" deep
30", 36
" W3024 SPECIFY
RIGHT or LEFT HINGED
W3624
W0936
36"
W1236
24" W1536
W1836
12" W2136
12" - Three adjustable shelves
• CUSTOM DEPTH: 5" to 15" deep
- One adjustable shelf
• CUSTOM DEPTH: 5" to 15" deep
24" High x 24" Deep Double Door 42" High Single Door
CUSTOM CUSTOM
DEPTH 9", 12", 1
5", 18", 2
1"
DEPTH
"
30", 36
W302424 SPECIFY
RIGHT or LEFT HINGED
W362424
W0942
24" 42" W1242
W1542
W1842
24"
W2142
12"
24", 27
", 30 ", 33",
36" DEPTH
W2436
24" W2436-PDSCR
W2736
W3036 - Field install at desired
height in cabinet
36"
W3336 36" - Two tier chrome
shelves lowers 10" and
W3636 brings
items forward 14¾"
- Gas assisted
12" mechanism smoothly
12" raises and lowers unit
- Three adjustable shelves
- Locking arm feature
• CUSTOM DEPTH: 5" to 15"deep holds shelf in down
position
42" High Double Door CUSTOM 42" High Double Door with Pull Down Chrome Shelves
24", 27
", 30" , 33", 3
6"
DEPTH
24" W2442-PDSCR
W2442
W2742
- Field install at desired
W3042 height in cabinet
42" - Two tier chrome
W3342 42" shelves lowers 10" and
brings
W3642 items forward 14¾"
- Gas assisted
mechanism smoothly
raises and lowers unit
12"
12" - Locking arm feature
- Three adjustable shelves holds shelf in down
position
• CUSTOM DEPTH: 5" to 15" deep
10
Wall Cabinets
30" High Double Door with Pull Down Frosted Shelves 30" High Wall Angle
SPECIFY
Wall Corner
RIGHT or20"
LEFT HINGED
24"
W2430-PDSFR WA2430
Wall Corner
- Field install at desired 20"
height in cabinet 20"
- Features 5 removable
30" acrylic storage bins
- Lowers items 10" and 20"
brings forward 14¾"
- Gas assisted
mechanism smoothly
12" raises and lowers unit
- Two adjustable shelves
- Clip corner back provides clearance for installation
36" High Double Door with Pull Down Frosted Shelves 36" High Wall Angle
SPECIFY
RIGHT or LEFT HINGED
W2436-PDSFR WA2436
24"
42" High Double Door with Pull Down Frosted Shelves 42" High Wall Angle
SPECIFY
Wall Corner RIGHT or LEFT HINGED
W2442-PDSFR 20"
WA2442
24"
11
Wall Cabinets
36" and 42" High x 15" Deep Wall Angle 42" High Wall Blind Corner
CUSTOM
Wall Corner
RIGHT
SPECIFY
23" or LEFT HINGED
24"
DEPTH
27" 27"
WA271536 SPECIFY
15" RIGHT or LEFT BLIND
WA271542
23"
Wall Corner 42"
WBCU2742
36" 23"
or 27" 27"
42"
15" 15"
Blind
23" Closure
Panel
36"
15" 15"
or
42"
15"
- Three adjustable shelves
- Three adjustable shelves - Indicate R or L for blind side (right shown)
- Clip corner back provides clearance for installation - Cabinet can be pulled for exact fit (see installation chart)
15" 15"
- 3" filler & 1/8" blind closure panel included
• CUSTOM DEPTH: 5" to 15" deep
Blind
Closure
Panel Frame Opening
141/4"
Blind
Closure
Panel
12" High Double Door 15" High x 24" Deep Double Door
CUSTOM CUSTOM
DEPTH DEPTH
", 36"
W2412PFG 30", 33 W302415PFG
", 36" W3012PFG W332415PFG
24", 30
W3612PFG W362415PFG
15"
12"
24"
12"
- No adjustable shelf
- No adjustable shelf - Must be installed between two cabinets, cabinet and wall,
• CUSTOM DEPTH: 5" to 15" deep or supported by refrigerator panels (RP)
• CUSTOM DEPTH: 16" to 23" deep
12" High x 24" Deep Double Door 18" High Double Door
CUSTOM CUSTOM
DEPTH DEPTH
36"
W242412PFG 24 ", 30", W2418PFG
", 36"
24”, 30
W302412PFG W3018PFG
W362412PFG W3618PFG
12"
18"
24"
12"
- No adjustable shelf
- Must be installed between two cabinets, cabinet and - No adjustable shelf
wall, or supported by refrigerator panels (RP) • CUSTOM DEPTH: 5" to 15" deep
• CUSTOM DEPTH: 16" to 23" deep 13
Wall Cabinets with Glass Doors
18" High x 24" Deep Double Door 30" High Single Door
CUSTOM CUSTOM
DEPTH 5", 18", 2
1" DEPTH
", 36" 9", 12", 1
24”, 30 W242418PFG SPECIFY
RIGHT or LEFT HINGED
W302418PFG
W0930PFG
W362418PFG
18" 30" W1230PFG
W1530PFG
W1830PFG
24" W2130PFG
12"
- No adjustable shelf
- Must be installed between two cabinets, cabinet and wall, - Two adjustable shelves, matching cabinet finish
or supported by refrigerator panels (RP) • CUSTOM DEPTH: 5" to 15" deep
• CUSTOM DEPTH: 16" to 23" deep
- One adjustable shelf, matching cabinet finish - Three adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15" deep • CUSTOM DEPTH: 5" to 15" deep
24" High x 24" Deep Double Door 42" High Single Door
CUSTOM CUSTOM
DEPTH 5", 18", 2
1" DEPTH
" 9", 12", 1
30", 36
W302424PFG SPECIFY
RIGHT or LEFT HINGED
W362424PFG
W0942PFG
24"
42" W1242PFG
W1542PFG
W1842PFG
24"
W2142PFG
12"
- One adjustable shelf, matching cabinet finish
- Must be installed between two cabinets, cabinet and wall, - Three adjustable shelves, matching cabinet finish
or supported by refrigerator panels (RP) • CUSTOM DEPTH: 5" to 15" deep
• CUSTOM DEPTH: 16" to 23" deep
14
Wall Cabinets with Glass Doors
30" High Double Door 30" High Wall Angle
CUSTOM
DEPTH SPECIFY
RIGHT or LEFT HINGED
Wall Corner
20"
30", 3 3", 36" W2430PFG WA2430PFG
24 ", 27",
W2730PFG
Wall Corner
W3030PFG 20"
20"
W3330PFG
30"
W3630PFG
20"
12"
- Two adjustable shelves, matching cabinet finish - Two adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15" deep - Clip corner back provides clearance for installation
12"
- Three adjustable shelves, matching cabinet finish - Three adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15"deep - Clip corner back provides clearance for installation
42"
W3342PFG 42"
W3642PFG
20"
42"
12"
- Three adjustable shelves, matching cabinet finish - Three adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15" deep - Clip corner back provides clearance for installation
15
Glass Wall Cabinets with Glass Doors
36" and 42" High x 15" Deep Wall Angle 42" High Wall Blind Corner
CUSTOM
Wall Corner
RIGHT
SPECIFY
23" or LEFT HINGED
24"
DEPTH
27" 27"
WA271536PFG SPECIFY
RIGHT or LEFT BLIND
WA271542PFG
15"
23"
Wall Corner 42"
WBCU2742PFG
36" 23"
or 27" 27"
42"
15" 15"
Blind
23" Closure
Panel
36"
15" 15"
or
42"
15"
- Three adjustable shelves, matching cabinet finish
- Indicate R or L for blind side (right shown)
- Three adjustable shelves, matching cabinet finish
- Cabinet can be pulled for exact fit (see installation chart)
- Clip corner
15" back provides 15"
clearance for installation
- 3" filler & 1/8" blind closure panel included
• CUSTOM DEPTH: 5" to 15" deep
30" High Wall Blind Corner 36" High Wall Blind Corner
CUSTOM CUSTOM
24"
DEPTH DEPTH
SPECIFY SPECIFY
RIGHT or LEFT BLIND RIGHT or LEFT BLIND
WBCU2730PFG WBCU2736PFG
Blind
Closure Blind Wall Cabinet
Blind
Panel Closure
Panel
• CUSTOM DEPTH: 5" to 15" deep • CUSTOM DEPTH: 5" to 15" deep
Adjacent
24"
24"
24"
BLIND WALL INSTALLATION GUIDE
Adjacent
BLIND WALL INSTALLATION GUIDE
Filler
Wall Cabinet
Wall Space “A” Frame Opening
3"
Blind Wall Cabinet
16
Wall Cabinets with No Doors
WALL CABINET CODING 15" High No Door
CUSTOM
DEPTH
STANDARD (12" DEEP) REFRIGERATOR (24" DEEP)
", 36" W3015ND
W 30 30 W 36 24 18 30", 33
W3315ND
W3615ND
Cabinet Cabinet Cabinet Cabinet Cabinet Cabinet Cabinet
Code Width Height Code Width Depth Height 15"
· Standard wall cabinets are 12" deep. Refrigerator wall
cabinets are 24" deep.
· Matching interiors are standard in wall cabinets with no
door 12"
· Products are available in all door styles unless
stated otherwise - No adjustable shelf
· Standard cabinet exterior is unfinished veneer, exposed • CUSTOM DEPTH: 5" to 15" deep
sides require Finished Ends or Matching End Panels
· No Doors
12"
24"
- No adjustable shelf
• CUSTOM DEPTH: 5" to 15" deep - No adjustable shelf
- Must be installed between two cabinets, cabinet and wall,
or supported by refrigerator panels (RP)
• CUSTOM DEPTH: 16" to 23" deep
24"
24"
12"
- No adjustable shelf
- Must be installed between two cabinets, cabinet and wall, - Two adjustable shelves, matching cabinet finish
or supported by refrigerator panels (RP)
• CUSTOM DEPTH: 5" to 15" deep
• CUSTOM DEPTH: 16" to 23" deep
12" 12"
- One adjustable shelf, matching cabinet finish - Three adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15" deep • CUSTOM DEPTH: 5" to 15" deep
24"
12"
- One adjustable shelf, matching cabinet finish
- Must be installed between two cabinets, cabinet and wall, - Three adjustable shelves, matching cabinet finish
or supported by refrigerator panels (RP)
• CUSTOM DEPTH: 5" to 15" deep
• CUSTOM DEPTH: 16" to 23" deep
18
Wall Cabinets with No Doors
30" High No Door 30" High Wall Angle
CUSTOM
DEPTH Wall Corner
", 36" 20"
24" , 27", 3
0", 33 W2430ND WA2430ND
W2730ND
Wall Corner
20"
W3030ND 20"
30" W3330ND
W3630ND
20"
12"
- Two adjustable shelves, matching cabinet finish - Two adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15" deep - Clip corner back provides clearance for installation
12"
- Three adjustable shelves, matching cabinet finish - Three adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15"deep - Clip corner back provides clearance for installation
W2442ND WA2442ND
20"
W2742ND
W3042ND Wall Corner
20" 20"
42" W3342ND 42"
W3642ND
20"
42"
12"
- Three adjustable shelves, matching cabinet finish - Three adjustable shelves, matching cabinet finish
• CUSTOM DEPTH: 5" to 15" deep - Clip corner back provides clearance for installation
19
Wall Cabinets with No Doors
36" and 42" High x 15" Deep Wall Angle 42" High Wall Blind Corner
CUSTOM
24"
DEPTH
Wall Corner
WA271536ND
23" SPECIFY
27" 27"
30" High Wall Blind Corner 36" High Wall Blind Corner
CUSTOM CUSTOM
24"
DEPTH DEPTH
SPECIFY SPECIFY
RIGHT or LEFT BLIND RIGHT or LEFT BLIND
WBCU2730ND WBCU2736ND
Blind
Closure Blind Wall Cabinet
Blind
Panel
Closure
Panel
• CUSTOM DEPTH: 5" to 15" deep • CUSTOM DEPTH: 5" to 15" deep
Adjacent
24"
24"
24"
BLIND WALL INSTALLATION GUIDE
Adjacent
BLIND WALL INSTALLATION GUIDE
Filler
Wall Cabinet
Wall Space “A” Frame Opening
3"
Blind Wall Cabinet
20
Wall Cabinets
12" Deep Wine Rack 15" Wide Wall Skin
30"
WRX3018 WSK1536
WSK1542
- 3/16" thick
- Field installed
36" - Matching veneer plywood
42" exterior for wood finishes
- BG, CB, CN, MG, TG
- Matching painted MDF
exterior for painted finishes
- Matching interior and exterior standard - AW, PG, PW
Vertical
- 3/4" thick solid wood “X” shelf NOTE: Cannot be used in
Grain
- Must be installed between two cabinets or cabinet and conjunction with Factory
wall Finished Ends
14¼"
WRHC36S WSK2412
"
.38
17
WSK2415
WSK2418
9.69" - Available 36" width
- Includes Hood, WSK2424
"
31 able
12"
mm Chimney, Hood Liner - 3/16" thick
Tri
19.32" 15"
and Blower 18" - Field installed
10.84"
- Chimney is trimmable 24"
- Matching veneer plywood
to adjust the height exterior for wood finishes
- Blower is 390 CFM, 6.0 - BG, CB, CN, MG, TG
sones, enclosed light - Matching painted MDF
"
.88 exterior for painted finishes
22 - Clearance of 3" Vertical
" on each side is Grain - AW, PG, PW
36
19" recommended
.31
" NOTE: Cannot be used in
20.08"
38 - Available in CN, MG, 23¼" conjunction with Factory
PW and PG only
Finished Ends
17
.38
" WRHC36A WSK1212 WSK1224
WSK1215 WSK1230
- Available in 36" width
9.69" WSK1218 WSK1236
- Includes Hood,
"
31 able Chimney, Hood Liner
12"
WSK1242
mm
Tri 19.32" and Blower 15" - 3/16" thick
10.84"
- Chimney is trimmable 18" - Field installed
to adjust the height 24"
- Matching veneer plywood
30"
- Blower is 390 CFM, 6.0 exterior for wood finishes
" 36" - BG, CB, CN, MG, TG
.31
8 "
38 sones, enclosed light 42"
20.15"
24.8 - Matching painted MDF
- Clearance of 3"
exterior for painted finishes
on each side is - AW, PG, PW
" recommended
36 Vertical
19"
- Available in BG, CB, Grain NOTE: Cannot be used in
TG and PW only conjunction with Factory
11¼"
Finished Ends
21
Base Cabinets
BASE CABINET CODING 24" Deep Double Door
CUSTOM
33", 36
"
DEPTH
24"
B 30 - 2T B33
B36
Cabinet Cabinet Customization
Code Width (2ROTS) 34½"
24" Deep Single Door 24" Deep Single Door with 1 Roll-Out Tray
CUSTOM
", 18", 2
1" DEPTH SPECIFY
RIGHT or LEFT HINGED
12", 15 24"
1"
SPECIFY ", 18", 2 B12-1T
12", 15 24"
RIGHT or LEFT HINGED
B15-1T
B12
B18-1T
34½"
B15
B21-1T
B18 34½"
B21
21½"
21½"
24" Deep Double Door 24" Deep Double Door with 1 Roll-Out Tray
CUSTOM
", 30"
DEPTH , 30"
24", 27 24" 24", 27 24"
B24-1T
B24
B27-1T
B27
B30-1T
B30
34½" 34½"
21½"
21½"
33", 36
"
24" B33-1T 33", 36
" 24" B33-2T
B36-1T B36-2T
34½" 34½"
21½" 21½"
24" Deep Single Door with 2 Roll-Out Trays 24" Deep Single Door with 1 Chrome Roll-Out Tray
SPECIFY SPECIFY
RIGHT or LEFT HINGED " RIGHT or LEFT HINGED
1" 15", 18
", 18", 2 24"
12", 15 24"
B12-2T B15-1WT
B15-2T B18-1WT
B18-2T
34½"
34½"
B21-2T
21½"
21½"
- FIELD INSTALLED
- One full width chrome wire roll-out tray
- Two full width roll-out trays - Features Full-Extension runners
24" Deep Double Door with 2 Roll-Out Trays 24" Deep Double Door with 1 Chrome Roll-Out Tray
24" 24"
", 30" B24-2T B24-1WT
24", 27 24"
B27-2T
B30-2T
34½"
34½"
21½"
21½"
- FIELD INSTALLED
- One full width chrome wire roll-out tray
- Two full width roll-out trays - Features Full-Extension runners
23
Base Cabinets
24" Deep Single Door with 2 Chrome Roll-Out Trays 24" Deep Double Door with 2-Tier Cookware Organizer
SPECIFY
"
RIGHT or LEFT HINGED 24" 24" B24-CWO
15", 18
24"
B15-2WT
B18-2WT
34½"
34½"
21½"
21½"
- FIELD INSTALLED
- FIELD INSTALLED - Two chrome wire tiers operate independently
- Two full width chrome wire roll-out trays - Adjustable dividers accommodate different size
- Features Full-Extension runners cookware
24" Deep Double Door with 2 Chrome Roll-Out Trays 24" Deep Single Full Height Door
CUSTOM
24" B24-2WT
DEPTH
24"
21"
15", 18", 24" SPECIFY
9", 12",
RIGHT or LEFT HINGED
B09FH
34½"
B12FH
34½" B15FH
B18FH
B21FH
21½"
21½"
- FIELD INSTALLED
- Two full width chrome wire roll-out trays - Two full-depth adjustable shelves
- Features Full-Extension runners • CUSTOM DEPTH: 9" to 23" deep
24" Deep Single Door with 2-Tier 24" Deep Double Full Height Door
Cookware Organizer SPECIFY
RIGHT or LEFT HINGED CUSTOM
15" DEPTH
24" B15-CWO 3", 36"
24", 27
", 30", 3 24" B24FH
B27FH
B30FH
34½"
B33FH
34½"
B36FH
21½"
21½"
- FIELD INSTALLED
- Two chrome wire tiers operate independently - Two full-depth adjustable shelves
24 - Adjustable dividers accomodate different size cookware • CUSTOM DEPTH: 9" to 23" deep
Base Cabinets
24" Deep Base Single Wastebasket 24" Deep Base - 4 Drawers
CUSTOM
B1WB15 DEPTH
"
15", 18 24" 36" 24"
B1WB18 BD36
- Basket slides on heavy
duty, full extension
runners
34½"
- 35 quart capacity 34½"
plastic basket is
secured by epoxy
coated white
wire “cage”
21½"
- White basket is 21½"
removable
- Basket dimensions: 14"W x 10"D x 18"H - Two standard top drawers
- Top mount roll-out tray for trash bag storage - Two deep drawers
- SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE • CUSTOM DEPTH: 15" to 23" deep
24" Deep Base Double Wastebasket 24" Deep Base Cooktop - Single False Front
24" Deep Base - 3 Drawers 24" Deep Base Cooktop - Double False Front
CUSTOM
DEPTH
30"
12", 15",
18", 24", 24" BCT36
36" 24"
BD12 *
BD15
34½" BD18
BD24 34½"
BD30
21½"
21½"
- One standard top drawer
- Two deep drawers
- False top drawer fronts
• CUSTOM DEPTH: 15" to 23" deep
- Two deep drawers
* Maximum drawer handle width for lower drawers is 4" wide
for raised panel styles, 5½" wide for recessed panel styles. - Accepts drop-in cooktop 25
Base Cabinets
24" Deep Sink Base 24" Deep Farm Sink Base
CUSTOM CUSTOM
", 30"
DEPTH 36" 24" DEPTH
24", 27 24"
SB24 FSB36
SB27 13½"
SB30
34½"
34½"
21½" 21½"
- No shelf, false drawer front - Front rail is field modified to fit sink
- May also be used as drop-in cooktop base - No shelf
• CUSTOM DEPTH: 9" to 23" deep • CUSTOM DEPTH: 9" to 23" deep
17"
21½"
- Angle sink front must be installed between two cabinets
- No shelf, two false drawer fronts - Frame/door can be installed with hinges on right or left
- May also be used as drop-in cooktop base - Floor support and toe base must be field constructed
• CUSTOM DEPTH: 9" to 23" deep - Maximum sink width for this application 25¾"
7", SBTOTK27
,2
24
" SBTOTK30
SBTOTK33 *
3"
34½" SBTOTK36 *
1-11/16"
3
GOLD SERIES
Wall Space "A" Door Opening
Base Cabinets
8 7/8"
12"
Blind Base Corner Installation 33" and 36" Easy Reach
45"
Min Max
42"
Wall Corner SPECIFY
33", 3
6" RIGHT or LEFT HINGED
39"
42"
Adjacent 3 8"
23 / 23 3/8
Cabinet
36"
30"
Top View
24"
A
C
SILVER SERIES
34½"
7/8"
12"
8
2" 9",
21½" 12"
9",1
Min Max
39" 45"
36" 42"
Frame Opening
- One full depth “L” shaped shelf
- Interior shelf MUST be installed prior to counter top
- Doors open 170 degrees for easy access
Cabinet
BBCU39
BBCU42
- SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE
24" Deep Blind Base Corner 33" and 36" Easy Reach Super Suzan
CUSTOM
30" 24" DEPTH Wall Corner
33", 3
SPECIFY
RIGHT or LEFT HINGED
6"
SPECIFY 3 8" EZR33SS
23 / 23 3/8
"
RIGHT or
LEFT BLIND EZR36SS
34½"
BBCU39 24"
34½"
21½"
2" 9",
21½" 12"
Blind Closure 9",1
Panel
- Indicate R or L for blind side (right shown) - Two 26" or 28" diameter, pie-cut independently
- Cabinet can be pulled for exact fit (see installation chart) revolving all wood shelves
- 3" filler & 1/8" blind closure panel included - Doors open 170 degrees for easy access
• CUSTOM DEPTH: 9" to 23" deep - SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE
24" Deep Blind Base Corner 36" Easy Reach Chrome Susan
CUSTOM
DEPTH
SPECIFY
24" Wall Corner RIGHT or LEFT HINGED
36"
36"
SPECIFY 3 /8" 23 3/8
EZR36-2WLS
RIGHT or 23 "
LEFT BLIND
34½"
BBCU42 24"
34½"
21½"
Blind Closure
21½" 12" 12"
Panel
- Indicate R or L for blind side (right shown)
- Cabinet can be pulled for exact fit (see installation chart) - CHROME SUSAN FIELD INSTALLED
- 3" filler & 3/16" blind closure panel included - Doors open 170 degrees for easy access
• CUSTOM DEPTH: 9" to 23" deep (9" to 14" deep - SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE
options have false front & no drawer) 27
Base Cabinets
24" Deep Base Pantry Pullout
9",
12"
24" BPPO9
BPPO12
34½"
21½"
BFFPO3
3" only
28
Base Cabinets
Matching Base End Panel 24" Deep End Panel with Filler
MBEP BEP2435
½"
24"
5/8" - 1½" and 3" solid wood
34 1/2" 1/4"
filler included
- Panel and fillers supplied
* loose for field assembly
BSK345 ISK4848
- 3/16" thick
- 3/16" thick
- Field modified and
installed - Field modified and installed
48"
34 1 / 2 " - Matching veneer plywood - Matching veneer plywood
exterior for wood finishes exterior for wood finishes
- BG, CB, CN, MG, TG - BG, CB, CN, MG, TG
Vertical - Matching painted MDF - Matching painted MDF
Grain exterior for painted Vertical exterior for painted finishes
finishes - AW, PG, PW Grain - AW, PG, PW
NOTE: Cannot be used in
23 1/4" conjunction with Factory 48"
Finished Ends
BP2435
¾"
24"
- Reversible, may be installed
left or right
- 3/4" thick plywood
construction painted or
stained to match
34½"
Vertical
Grain
1½", 3"
29
Base Cabinets with No Doors
BASE CABINET CODING 24" Deep Single Full Height No Door
CUSTOM
DEPTH
21"
15", 18",
B 30 - 2T 9", 12", 24"
B09ND
B12ND
Cabinet Cabinet Customization
B15ND
Code Width (2ROTS) B18ND
34½"
B21ND
· Standard Base Cabinets are 24" deep and 34½" high
· Standard cabinet exterior is unfinished veneer, exposed
sides require Finished Ends or Matching End Panels
· Matching interiors are standard in base cabinets with no 21½"
doors
- Two full-depth adjustable shelves
• CUSTOM DEPTH: 9" to 23" deep
18½"
30
Tall Cabinets
TALL CABINET CODING 24" Deep Two Door Utility
CUSTOM
DEPTH
18"
U 24 24 84 SPECIFY
24"
24" Deep Two Door Utility 24" Deep Four Butt Door Utility
CUSTOM CUSTOM
18" 24"
DEPTH DEPTH
24" 24"
SPECIFY U242484
RIGHT or LEFT HINGED
30"
U182484 30"
21½" 21½"
24" Deep Two Door Utility 24" Deep Four Butt Door Utility
CUSTOM CUSTOM
18" 24" DEPTH 24" 24" DEPTH
SPECIFY U242490
RIGHT or LEFT HINGED
36" 36" U242496
U182490 42"
- One fixed shelf dividing
upper and lower doors, five
- One fixed shelf dividing adjustable shelves
90"
upper and lower doors, four
adjustable shelves 90"
- Optional rollout trays or
96" additional shelves available
- Optional rollout trays or
additional shelves available * On 96", loose toe kick box for
ease of installation
- Exposed sides require
TSK90 - Exposed sides require TSK90
- TSK96
• CUSTOM DEPTH: 9" to
23" deep * - Factory finish ends not
21½"
available for 96" Unit
21½"
• CUSTOM DEPTH: 9" to
23" deep 31
Tall Cabinets
24" Deep Two Door Utility 24" Deep Four Butt Door Utility
with Four Rollout Trays with Four Rollout Trays
SPECIFY
RIGHT or LEFT HINGED 24" U242484-4T
24"
18" 24"
U182484-4T
30"
30" - One fixed shelf
- One fixed shelf dividing dividing upper and
upper and lower doors lower doors
84"
84" - Four repositionable, full - Four repositionable,
width rollout trays full width rollout trays
- One adjustable shelf - One adjustable shelf
- Exposed sides require - Exposed sides
TSK84 require TSK84
21½"
21½"
24" Deep Two Door Utility 24" Deep Four Butt Door Utility
with Four Rollout Trays SPECIFY with Four Rollout Trays
RIGHT or LEFT HINGED U242490-4T
18" 24" 24" 24"
U182490-4T
- One fixed shelf
dividing upper and
- One fixed shelf dividing lower doors
36"
upper and lower doors
- Four repositionable,
- Four repositionable, full full width rollout trays
width rollout trays 90"
90" - Two adjustable
- Two adjustable shelves shelves
- Exposed sides require - Exposed sides
TSK90 require TSK90
21½"
21½"
24" Deep Two Door Utility 24" Deep Four Butt Door Utility
with Four Rollout Trays SPECIFY with Four Rollout Trays
RIGHT or LEFT HINGED U242496-4T
18" 24" 24" 24"
U182496-4T - One fixed shelf
dividing upper and
lower doors
- One fixed shelf dividing 42" - Four repositionable,
42"
upper and lower doors full width rollout trays
- Four repositionable, full - Two adjustable
width rollout trays 96"
shelves
96"
- Two adjustable shelves * Loose toe kick
* Loose toe kick box for box for ease of
ease of installation installation
- Exposed sides
- Exposed sides require require TSK96
TSK96
- Factory finish ends
- Factory finish ends not not available
* available
21½" 21½"
32
Tall Cabinets
24" Deep Two Door Utility 24" Deep Universal Oven
with Four Pull-out Chrome Trays
SPECIFY 33" 24"
RIGHT or LEFT HINGED OC332484U
18" 24"
U182484-PO4WS 18"
- Consult chart for oven
cutout dimensions
- FIELD INSTALLED PULL-OUT
UNIT - No adjustable shelf
- Pull-out unit includes 4 chrome 84" - 3 field removable drawers
84"
baskets and optional door - 3" stiles in oven compartment
mounts
- Exposed sides require TSK84
- Top and bottom glides are soft
closing and 250 lb. weight rated - For frame openings refer to
page 40
- One fixed shelf dividing upper
and lower door
- One adjustable upper shelf 21½" MIN. MAX MIN. MAX
CABINET CUTOUT CUTOUT CUTOUT CUTOUT
- Exposed sides require TSK84 WIDTH WIDTH HEIGHT HEIGHT
21½"
OC332484U 27" 31" 22" 60"
¾” ½"
TP2484 RP84
TP2490 RP90
TP2496 RP96
30" Deep Universal Refrigerator Panel 30" Deep Universal Refrigerator Panel with Filler
½"
RP3096
¾"
30" TP3096 30"
34
Tall Cabinets with Glass Doors
TALL CABINET CODING 24" Deep Four Butt Door Utility
with Four Rollout Trays
24" Deep Four Butt Door Utility 24" Deep Four Butt Door Utility
CUSTOM with Four Rollout Trays
24" 24"
DEPTH 24" 24"
U242490PFG-4T
U242484PFG
30"
- Top door is glass
with matching cabinet
interior throughout
- Top door is glass
- One fixed shelf
- One fixed shelf dividing dividing upper and
84" upper and lower doors, four 90" lower doors
adjustable shelves - Four repositionable,
- Optional rollout trays or full width rollout trays
additional shelves available in solid birch; not a
part of the matching
- Exposed sides require cabinet interior
TSK84 - TSK90
- Two adjustable shelves
• CUSTOM DEPTH: 9" to - Exposed sides require
21½"
23" deep TSK90
21½"
24" Deep Four Butt Door Utility 24" Deep Four Butt Door Utility
CUSTOM
DEPTH
with Four Rollout Trays
24" 24" U242496PFG-4T
U242490PFG 24" 24" - Top door is glass
with matching cabinet
36" U242496PFG interior throughout
42"
- Top door is glass - One fixed shelf dividing
42" upper and lower doors
- One fixed shelf dividing
upper and lower doors, five - Four repositionable, full
adjustable shelves width rollout trays in
90" 96" solid birch; not a part
96" - Optional rollout trays or of the matching cabinet
additional shelves available interior
* On 96", loose toe kick box for - Two adjustable shelves
ease of installation * Loose toe kick box for
ease of installation
- Exposed sides require TSK90
- TSK96 - Exposed sides require
* TSK96
- Factory finish ends not
21½"
available for 96" Unit 21½" - Factory finish ends
not available
• CUSTOM DEPTH: 9" to 23" 35
Glass Tall Cabinets with Glass Doors
24" Deep Universal Oven 24" Deep Two Door Utility
CUSTOM
33" 24"
OC332484PFGU 18" 24"
DEPTH
SPECIFY
18" RIGHT or LEFT HINGED
- Top door is glass
- Consult chart for oven
30"
U182484PFG
cutout dimensions
- No adjustable shelf - Top door is glass
84"
- 3 field removable drawers 84" - One fixed shelf dividing
- 3" stiles in oven compartment upper and lower doors, four
adjustable shelves
- Exposed sides require TSK84
- For frame openings refer to - Optional rollout trays or
page 40 additional shelves available
- Exposed sides require TSK84
MIN. MAX MIN. MAX
21½" CABINET CUTOUT CUTOUT CUTOUT CUTOUT • CUSTOM DEPTH: 9" to
WIDTH WIDTH HEIGHT HEIGHT
23" deep
OC332484U 27" 31" 22" 60" 21½"
21½"
· Standard Vanity Base Cabinets are 21" deep and 34½" high CUSTOM
· Cabinet depth does not include door thickness DEPTH
· Custom Depths are available where indicated. Use 18½"
FOR CUSTOM DEPTHS
Standard Base Cabinet coding to order as specified.
· Order B33 or B36
· Products are available in all door styles unless
· Select 9" to 23" depth
stated otherwise - One full depth adjustable
shelf · 9" to 14" deep have
· Standard cabinet exterior is unfinished veneer, exposed false fronts & no drawer
sides require Finished Ends - Two standard drawers
21" Deep Single Door Vanity Base 21" Deep Single Door Vanity Sink Base
SPECIFY SPECIFY
1" RIGHT or LEFT HINGED RIGHT or LEFT HINGED
", 18", 2
12", 15 21"
VSB2121
STANDARD
21" DEPTHS 21" 21"
VB1221
VB1521
VB1821
34½"
VB2121 - Maximum sink
cutout 19" wide
34½"
CUSTOM - No shelf
DEPTH - False drawer
front
FOR CUSTOM DEPTHS
· Order B12, B15, B18 or
18½"
B21
· Select 9" to 23" depth
- One full depth adjustable shelf 18½"
· 9" to 14" deep have
- One standard drawer false fronts & no drawer
21" Deep Double Door Vanity Base 21" Deep Double Door Vanity Sink Base
STANDARD ", 30"
STANDARD
", 30" 21" DEPTHS 24", 27 21"
21" DEPTHS
24", 27 21"
VB2421 VSB2421
VB2721 VSB2721
VB3021 VSB3021
34½"
34½"
CUSTOM
DEPTH CUSTOM
FOR CUSTOM DEPTHS 18½"
DEPTH
18½"
· Order B24, B27 or B30 FOR CUSTOM DEPTHS
· Select 9" to 23" depth · Order SB24, SB27
or SB30
- One full depth adjustable shelf · 9" to 14" deep have - No shelf
false fronts & no drawer · Select 9" to 23" depth
- One standard drawer - False drawer front
39
Vanity & Desk Cabinets
21" Deep Double Door Vanity Sink Base 21" Deep Double Full Height Door Vanity Base
CUSTOM
CUSTOM DEPTH
18½" DEPTH 18½" FOR CUSTOM DEPTHS
FOR CUSTOM DEPTHS · Order B24FH, B27FH,
- No shelf, two false fronts · Order SB33 or SB36 - Two adjustable shelves B30FH or B36FH
· Select 9" to 23" depth · Select 9" to 23" depth
21" Deep Single Full Height Door Vanity Base 21" Deep Vanity Base Drawer
STANDARD
SPECIFY 21" DEPTHS
1"
", 18", 2 RIGHT or LEFT HINGED ", 18", 2
4"
12", 15 21" 12", 15 21"
VBD1221
STANDARD
21" DEPTHS VBD1521
VB1221FH VBD1821
VB1521FH VBD2421
34½" VB1821FH 34½"
VB2121FH
CUSTOM CUSTOM
DEPTH DEPTH
18½" FOR CUSTOM DEPTHS 18½" FOR CUSTOM DEPTHS
· Order B12FH, B15FH, · Order BD12, BD15,
B18FH or B21FH - One standard drawer BD18 or BD24
- Two adjustable shelves · Select 9" to 23" depth · Select 15" to 23" depth
- Two deep drawers
28½"
28½"
18½"
18½"
NOTE: Does not
support hanging - One adjustable shelf
- Three standard drawers files
- Comfortable height for dressing table or writing surface
- Comfortable height for dressing table or writing surface - Matching exterior standard
40 - Matching exterior standard
Vanity & Desk Cabinets
21" Deep Desk Knee Drawer Vanity Base Skin
26
¼"
21"
DKD30 VBSK345
4-7/8"
- 3/16" thick
"
- Field modified and
28 installed
NOTE: Full
30
"
Extension Soft-Close - Matching veneer
34½" plywood exterior for
Runner Not Available wood finishes
- BG, CB, CN, MG, TG
- One full width pencil/cosmetic drawer - Matching painted MDF
- Knee drawer is designed for use between two desk exterior for painted
base cabinets finishes
- AW, PG, PW
- Comfortable height for dressing table or writing surface
when installed at 28½" height with 1½" thick countertop NOTE: Cannot be used
in conjunction with
- Slab drawer front all door styles 20¼" Factory Finished Ends
- May be trimmed up to 1" on each side
30" High x 7" Deep Vanity Wall Boutique Vanity Tall Skin
VWB2430 VTSK84
24" 7"
- 3/16" thick
- Field modified and installed
84" - Matching veneer plywood
exterior for wood finishes
- Two adjustable - BG, CB, CN, MG, TG
30"
shelves
- Matching painted MDF
- Matching interior exterior for painted finishes
and exterior - AW, PG, PW
standard
NOTE: Cannot be used in
conjunction with Factory
Finished Ends
23¼"
41
Vanity Cabinets with No Door
VANITY CABINET CODING 21" Deep Double Full Height Door Vanity Base
21" STANDARD
15", 18", 24"
9", 12",
21" DEPTHS
VB1221ND
VB1521ND
VB1821ND
34½" VB2121ND
CUSTOM
DEPTH
21½"
FOR CUSTOM DEPTHS
· Order B12ND, B15ND,
B18ND or B21ND
- Two adjustable shelves · Select 9" to 23" depth
42
Vanity Linen Cabinets
21" Deep Two Door Linen 21" Deep Four Door Linen
STANDARD
SPECIFY 21" DEPTH
RIGHT or LEFT HINGED
18" 21"
VLC242184
STANDARD
21" DEPTH 24" 21"
VLC182184
30"
30"
84" 84"
18½" 18½"
CUSTOM CUSTOM
DEPTH DEPTH
FOR CUSTOM DEPTHS FOR CUSTOM DEPTHS
· Order U182484 Note: Roll out trays not · Order U242484
available for Vanity Linen
· Select 9" to 23" depth · Select 9" to 23" depth
Cabinets or reduced depth
cabinets.
- One fixed shelf dividing upper and lower doors, four - One fixed shelf dividing upper and lower doors, four
adjustable shelves adjustable shelves
- Exposed sides require VTSK84 - Exposed sides require VTSK84
43
Vanity Linen Cabinets with Glass Doors
VANITY CABINET CODING 21" Deep Four Door Linen
STANDARD
21" DEPTH
VLC 30 21 VLC242184PFG
24" 21"
84"
CUSTOM
DEPTH
FOR CUSTOM DEPTHS
18½"
· Order U182484PFG
· Select 9" to 23" depth
18½"
STANDARD CUSTOM
21" DEPTH DEPTH
VLC182184ND FOR CUSTOM DEPTHS
18" 21" · Order U242484ND
· Select 9" to 23" depth
30" - One fixed shelf dividing upper and lower sections, four
adjustable shelves
- Exposed sides require VTSK84
84"
CUSTOM
DEPTH
FOR CUSTOM DEPTHS
· Order U182484ND
· Select 9" to 23" depth
18½"
45
Accessories
Spice Drawer Insert Knife Block Insert
4", 27"
", 21", 2 ", 21"
15", 18 15", 18
SDI15 KBI15
SDI18 KBI18
SDI21 KBI21
SDI24
SDI27
4"
", 21", 2
15", 18 ", 21", 2
4"
15", 18
CDT15 UTD15
CDT18 UTD18
CDT21 UTD21
CDT24 UTD24
46
Accessories
Rollout Tray Kits ",33",3
6" Base Cabinet Shelf Kits
27",30
18",21",24",
12",15",
5"
20"
- Shelf kits match face frame and door - Shelf kits match face frame and door
- 3/4" Thick plywood faced with light birch veneer - 3/4" thick plywood
finish
- Edgebanded on front edge
- Edgebanded on front edge
- One shelf and set of clips per kit
- One shelf and set of clips per kit
- Consult availability guide EXAMPLE: 36" wide wall cabinet uses SK3612MI
SHELF KIT AVAILABILITY GUIDE FOR BASES/TALLS SHELF KIT AVAILABILITY GUIDE FOR WALLS
ACTUAL PART# DESIGNED TO FIT ACTUAL
PART# DESIGNED TO FIT WIDTH WIDTH
SK1224MI B12ND 10¼" SK1212MI W1212ND, W1230PFG/36/42, W1230ND/36/42 10¼"
SK1524MI B15ND 13¼" SK1512MI W1512ND, W1530PFG/36/42, W1530ND/36/42 13¼"
SK1824MI B18ND, U182484PFG/90/96, U182484ND/90/96 16¼" SK1812MI W1812ND, W1830PFG/36/42, W1830ND/36/42 16¼"
SK2124MI B21ND 19¼" SK2112MI W2112ND, W2130PFG/36/42, W2130ND/36/42 19¼"
SK2424MI B24ND, U242484PFG/90/96, U242484ND/90/96 22¼" SK2412MI W2412ND, W2430PFG/36/42, W2430ND/36/42 22¼"
SK2724MI B27ND 25¼" SK2712MI W2712ND, W2730PFG/36/42, W2730ND/36/42 25¼"
SK3024MI B30ND 28¼" SK3012MI W3012ND, W3024PFG/30/36/42, W3024ND30/36/42 28¼"
SK3324MI B33ND 31¼" SK3312MI W3312ND, W3330PFG/36/42, W3330ND/36/42 31¼"
SK3624MI B36ND 34¼" SK3612MI W3612ND, W3624PFG/30/36/42, W3624ND/30/36/42 34¼"
48
Accessories
Cabinet Fronts Only (CFO) Matching Wall End Panels
MWEP30
MWEP36
Most Wall cabinets can be
ordered as “Cabinet Fronts MWEP42
Only”. Face frame, doors,
hinges and bumpers will be
supplied and shipped loose.
Cabinet Fronts Only (CFO) 8’ Finished Toe Kick – Matches Frame Color
MTK8
Most Tall cabinets can be ¼"
ordered as "Cabinet Fronts
Only". Face frame, doors, 8'
hinges and bumpers will be
supplied and shipped loose.
49
Accessories
U-Shaped Tray Divider 3" - Chrome Sink Base Liner
28½" or 34½"
USTD3-CR SBL2730
SBL3336
23¼"
9 7�8"
TD12CR TUK
TD18CR
30" 30"
135° 3" 42" 135° 3"
3" 3"
WFS48
WFS4815
48" 3/4"
11¾"
or 15"
52
Molding
Furniture Valance ¾" FV48 Scribe Molding SM8
48"
5½"
8' ¼"
5½"
5 1 8"
¾"
- 3/4" thick solid wood
- 1/4" thick solid wood
- May be trimmed 3" on each end
3" ¾"
- 3/4" thick solid wood
- May be trimmed on each end - 1/4" thick solid wood
1 7/8"
¾" - 3/4" thick solid wood
- 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation
- Available in CB, CN, MG, PW and PG finishes ONLY
¾" 3"
2¾"
- 3/4" thick solid wood
- Use with TMMS8 for top of cabinet installation - 1" thick solid wood 3½" D
- Available in all styles except PG and AW 3½" W
Top View
¾" 3½" D
Molding 3½" W
Top View
- 3/4" thick solid unfinished wood 1 /16"3
- Solid hardwood
- Recommended for installation of ACM8,
1¾" D
CM8, CCM8, SCM8 moldings 3½" W
Top View
8' 5/8"
34½"
1¾" D
3/8" 3½" W
Top View
- 3/4" thick solid wood
- Solid hardwood
- Available in all styles except PG
- Available in all styles except PG
8' ½"
8 7/8"
5/8 "
8' 8'
4"
3½"
2¼"
¾"
DH45-100 - 7" Euro Pull DH44-346 - 8" Square Bar Pull DH116-120 - 10" Quadra Pull
3¾" center (96mm) 7½" center (196mm) 5" inside center (128mm)
8-13/16" outside center (224mm)
DH44-348 - 9" Square Bar Pull
DH45-102 - 10" Euro Pull*
8-13/16" center (224mm) DH116-122 - 11" Quadra Pull
6-15/16" center (176mm)
6-5/16" inside center (160mm)
DH44-350 - 13" Square Bar Pull* 10-1/16" outside center (256mm)
DH45-104 - 13" Euro Pull* 12-5/8" center (320mm)
9¾" center (248mm) DH116-126 - 14" Quadra Pull
DH44-352 - 19" Square Bar Pull* 8-13/16" inside center (224mm)
18-7/8" center (480mm) 12-5/8" outside center (320mm)
55
Decorative Hardware
DH43-826 DH43-630 DH43-618
DH65-120 DH88-110
8"
2-7/
- Square dimpled pull - Ribbed bow pull NOTE: Refer to the individual
- Matte nickel - Brushed nickel
decorative hardware size
- 6-5/16" center (160mm) - 3-3/4" center (96mm)
specifications to determine
- 7-1/2" outside length - 4-11/16" outside length
compatibility with this template.
57
Cabinet Frame & Opening Dimensions
24"
30" 27"
36" Wall Blind 33"
or Wall Blind or
42" 39"
58
Cabinet Frame & Opening Dimensions
NOTE: 96" TALL CABINETS ARE SUPPLIED WITH LOOSE TOE KICK BOX (EXPOSED SIDES REQUIRE TSK96)
59
Cabinet Frame & Opening Dimensions
6"
2"
13 ½”
15”
11/2"
41/2" 1 ½”
24",27",30",33",36"
36”
NOTE: B27, B30 have full width drawers
BBCU42 BBCU39
1 ½" 1 ½" 1 ½" 1 ½"
12" 9" 12" 9" 9" 9"
1 ½"
6"
1 ½" 1 ½"
4 ½" 4 ½"
36" 30"
62
Notes
63
Notes
64
idealcabinetry.com
866-367-2516
SEMI-CUSTOM
Kitchen & Bath Cabinetry
IC-A_W-SPECBOOK-0319