Академический Документы
Профессиональный Документы
Культура Документы
txt
--------------------------------------------------------------------------------------------------------------
Q The internal resistance force developed in a body per unit area is known as__________
A stress
B strain
C elasticity
D none
Ans -A-
--------------------------------------------------------------------------------------------------------------
Q The S I unit of stress is _______
A GPa
B MPa
C KPa
D Pa
Ans -D-
--------------------------------------------------------------------------------------------------------------
Q 1 MPa= _______
A 1N/m2
B 1N/mm2
C 1KN/mm2
D 1 KN/m2
Ans -B-
--------------------------------------------------------------------------------------------------------------
Q 1 GPa= _______
A 1N/m2
B 1N/mm2
C 1KN/mm2
D 1 KN/m2
Ans -C-
--------------------------------------------------------------------------------------------------------------
Q 1 Pa= _______
A 1N/m2
B 1N/mm2
C 1KN/mm2
D 1 KN/m2
Ans -A-
--------------------------------------------------------------------------------------------------------------
Q The change in length per unit original length is known as ____________
A stress
B strain
C elasticity
D none
Ans -B -
--------------------------------------------------------------------------------------------------------------------
Q The S I unit for strain is __________
A Pa
B MPa
C GPa
D none
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q The property of material to get Ruptured without significant deformation on applying external load is known as ______
A elasticity
B Plasticity
C ductility
D Brittleness
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q The property of material to get to get drawn in to thin wires without breaking is known as _____
A elasticity
B Plasticity
C ductility
D BrittlenesS
Ans -C -
--------------------------------------------------------------------------------------------------------------------
Q The property of a material to resist deformation is known as _________
A elasticity
B Plasticity
C stiffness
D BrittleneSs
Ans -C -
--------------------------------------------------------------------------------------------------------------------
Q The property of a material to absorb shock energy without failure is known as _________
A elasticity
B Plasticity
C stiffness
D resilience
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q the permanent deformation of a material with time when subjected to a constant as ______
A creep
B plasticity
C fatigue
D resilience
Ans -A -
--------------------------------------------------------------------------------------------------------------------
Q Failure of a material due to repeated cycles of loading and unloading is known as __________
A creep
B plasticity
C fatigue
D resilience
Ans -C -
--------------------------------------------------------------------------------------------------------------------
Q The property of a material to remain in its deformed state even after removing external loads is known as__________
A creep
B plasticity
C fatigue
D resilience
Ans -B -
--------------------------------------------------------------------------------------------------------------------
Q A wire of ductile material is able to regain its original length till ______
A proportional limit
B elastic limit
C Y S is reached
Ans -B -
--------------------------------------------------------------------------------------------------------------------
Q A wire of ductile material is able to regain its original length after ______
A proportional limit
B elastic limit
C Y S is reached
Ans -B -
--------------------------------------------------------------------------------------------------------------------
Q Hookes law is valid within _______
A elastic
B plastic
C Yeiding
D linear
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q The stress-strain graph is nearly horizontal in _____ region
A elastic
B plastic
C Yeiding
D linear
Ans -C -
--------------------------------------------------------------------------------------------------------------------
Q There is increase in strain without any increase in stress in _____
A elastic
B plastic
C Yeiding
D linear
Ans -C -
--------------------------------------------------------------------------------------------------------------------
Q Fracture occurs at _____
A rupture pt
B yeild pt
C elastic limit
D ultimate stress
Ans -A -
--------------------------------------------------------------------------------------------------------------------
Q The ratio of yield stress to working sterss is known as ____
A margin of safety
B factor of safety
C mod of elasticity
D none
Ans -B -
--------------------------------------------------------------------------------------------------------------------
Q The maximum stress reached in a ductile material is known as ______
A ultimate stress
B factor of safety
C mod of elasticity
D none
Ans - A-
--------------------------------------------------------------------------------------------------------------------
Q The ratio of ultimate load to working load is _____
A margin of safety
B factor of safety
C mod of elasticity
D none
Ans -B -
--------------------------------------------------------------------------------------------------------------------
Q The ratio of normal stress to normal strain is ____
A modulus of elasticity
B mod of rigidity
C bulk modulus
D Poissons ratio
Ans -A -
--------------------------------------------------------------------------------------------------------------------
Q The ratio of shear stress to shear strain is ____
A modulus of elasticity
B mod of rigidity
C bulk modulus
D Poissons ratio
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q The maximum value of poissons ratio is _______
A1
B 0.5
C 0.25
D 0.75
Ans -C -
--------------------------------------------------------------------------------------------------------------------
Q The expression for change in length of a uniform cross section wire subjected to axial load is _____
A PL/AE
C eE
D All
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q The expression for stress is _____
A P/A
B dL/L
C P/AE
D all
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q The expression for strain is _____
A S/E
B dL/L
C P/AE
D All
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q modulus of elasticity can be calculated within _______ region
A elastic
B plastic
C yielding
D linear
Ans -D -
--------------------------------------------------------------------------------------------------------------------
A stiffness
B Plasticity
C flexibility
D resilence
Ans -C -
--------------------------------------------------------------------------------------------------------------------
Q The elongation produced by unit load in the rod is known as ______
A stiffness
B Plasticity
C flexibility
D resilence
Ans -C-
--------------------------------------------------------------------------------------------------------------------
Q If an axial force of 1KN is applied to a rod of 100 mm2 cross section area produces change
in length of 1 mm over a length of 12 m;the modulus of elasticity of the material will be ___
A 120 MPa
B 10 Gpa
C 12 Gpa
D 120 Gpa
Ans -D -
--------------------------------------------------------------------------------------------------------------------
Q If an axial force of 1KN is applied to a rod of 100 mm2 cross section area ;length 5 m & the modulus of elasticity
of the material is 100 GPa ;the change in length of the rod will be _____
A 1 mm
B 1m
C 0.5 mm
D 0.25 mm
Ans -C-
--------------------------------------------------------------------------------------------------------------------
Q If an axial force of 1KN is applied to a rod of 25 diameter;length 300 mm; the modulus of elasticity
of the material is 200 GPa ;the change in length of the rod is 0.045 mm...
A 1.5
B 0.75
C 0.5
D 0.25
Ans -C-
--------------------------------------------------------------------------------------------------------------------
Q The expression for stiffness is
A AE/L
B L/AE
C PL/AE
Ans - B-
--------------------------------------------------------------------------------------------------------------------
Q The expression for flexibility is
A AE/L
B L/AE
C PL/AE
Ans -B-
--------------------------------------------------------------------------------------------------------------------
Q Change in length of a rod due to change in tempreture depends on ________
A original length
B change in tempreture
C modulus of elasticity
Ans -D-
--------------------------------------------------------------------------------------------------------------------
Q Change in length of a rod due to change in tempreture does not depend on ________
A original length
B change in tempreture
C modulus of elasticity
Ans -C-
--------------------------------------------------------------------------------------------------------------------
Q Change in length of a rod due to change in tempreture does not depend on ________
A ambient temperature
B change in tempreture
C modulus of elasticity
Ans -A-
--------------------------------------------------------------------------------------------------------------------
Q Thermal sterss is developed in a rod subjected to a change in temperature when _______
C A&B
D none
Ans -B-
--------------------------------------------------------------------------------------------------------------------
Q Which of the following beams will develop thermal stress when subjected to a change in temperature?
A Cantilever beam
D none
Ans -B-
--------------------------------------------------------------------------------------------------------------------
Q Which of the following beams will develop thermal stress when subjected to a change in temperature?
A Cantilever beam
D none
Ans -D-
---------------------------------------------------------------------------------------------------------------------
Q Which of the following beams will develop thermal stress when subjected to a change in temperature?
A fixed beam
D none
Ans -A-
---------------------------------------------------------------------------------------------------------------------
Q Which of the following beams will develop thermal stress when subjected to a change in temperature?
A Cantilever beam
D none
Ans -B-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
the co-efficent of thermal expansion for copper is greater than that for steel.
D none
Ans -B-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
the co-efficent of thermal expansion for copper is greater than that for steel.
D none
Ans -A-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
the co-efficent of thermal expansion for copper is greater than that for steel.
D none
Ans -A-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
the co-efficent of thermal expansion for copper is greater than that for steel.
D none
Ans -B-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
The composite strip is placed between 2 rigid supports so that the ends touch the supports.
D none
Ans -D-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
The composite strip is placed between 2 rigid supports so that the ends touch the supports.
D none
Ans -C-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
The composite strip is placed between 2 rigid supports so that the ends touch the supports.
D none
Ans -D-
---------------------------------------------------------------------------------------------------------------------
Q A steel strip is weilded to a copper strip of the same dimensions along the length.
The composite strip is placed between 2 rigid supports so that the ends touch the supports.
D none
Ans -C-
---------------------------------------------------------------------------------------------------------------------
Q If a force of maginitude P acts on the surface of a area A ,the shear stress is ______
A P/A
B P cos@/A
C P sin@/A
D none
Ans -B-
---------------------------------------------------------------------------------------------------------------------
Q If a force of maginitude P acts on the surface of a body at angle @ with the surface of area A,
A P/A
B P cos@/A
C P sin@/A
D none
Ans -C-
---------------------------------------------------------------------------------------------------------------------
Q If F is is the shear force acting on a rivet in a state of angle shear & the rivet has an area of cross section A,
A F/A
B 2F/A
C F/2A
D none
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q If F is is the shear force acting on a rivet in a state of double shear & the rivet has an area of cross section A,
A F/A
B 2F/A
C F/2A
D none
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q While punching a hole in a metal sheet using a punch,_____ stress is developed in a punch.
A normal compressive
B normal tensile
C shear
D lateral
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q While punching a hole in a metal sheet using a punch,_____ stress is developed in a metal sheet.
A normal compressive
B normal tensile
C shear
D lateral
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A steel rod of length L has a circular cross section of dia meter d.If dl is the change in its length
A dl/L
B -Vdl/L
C dd/D
D -dd/D
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A steel rod of length L has a circular cross section of dia meter d.If dl is the change in its length
A dl/L
B -Vdl/L
C dd/D
D -dd/D
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A steel rod of length L has a circular cross section of dia meter d.If dl is the change in its length
A dl(1-2V)/L
B -dl(1-2V)/L
C dd(1-2V)/D
D -dd(1-2V)/D
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The relation between modulus of elasticity E,bulk modulus K & poissons ratio V is _________
A E=3K(1+2V)
B E=3K(1-2V)
C E=2K(1+3V)
D E=2K(1-3V)
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q The relation between modulus of elasticity E,modulus of rigidity G & poissons ratio V is _________
A E=3G(1+2V)
B E=3G(1-2V)
C E=2G(1+V)
D E=2G(1-V)
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q The relation between modulus of elasticity E,modulus of rigidity G & bulk modulus K is _________
A 9KG/(3G+K)
B 9KG/(3G-K)
C 9GK/(G-3K)
D 9GK/(G+3K)
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q The longitudinal stress develoed in a rod of cross setion area 50 mm2 is 100 MPa.
A 2N
B 2 KN
C 5N
D 5 KN
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q If the working load is one third of the ultimate load,the factor of safety is ____
A 3
B 0.33
C 1
D 30
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q If the working load is one third of the ultimate load,the margin of safety is ____
A 3
B 0.33
C 1
D 2
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Working loads on structures must be _____ultimate load.
A equal to
B greater than
C less than
D none
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q The value of factor of safety is always ___.
A >1
B <1
C =1
D no such value
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The value of margin of safety is always ___.
.
A >1
B <1
C =1
D >0
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Modulus of elasticity depends on _____
A length
B change in length
C stress
D none
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Modulus of rigidity depends on _____
A shear stress
B shear strain
C both A & B
D none
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Bulk modulus depends on ________.
A volumetric strain
B volumetirc stress
C both A & B
D none
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Poissons ratio depends on ______.
A longitudinal stess
B lateral strian
C both A & B
D none
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods have uniform cross section areas in the ratio 1:2 &
A 1:2
B 2:1
C 1:4
D 4:1
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods have uniform circular cross section areas with diameters in the ratio of 1:2 &
A 1:2
B 2:1
C 1:4
D 4:1
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods have uniform cross section areas in the ratio 1:2 &
A 1:2
B 2:1
C 1:1
D 4:1
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods have uniform cross section areas in the ratio 1:2 &
A 1:2
B 2:1
C 1:1
D 4:1
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q The change in length of a rod of uniform cross section was found to be 2mm for some applied force.
The change in length of a rod of the same material & length but of twice the cross setion
A 1
B 2
C 0.5
D 4
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The change in length of a rod of uniform cross section was found to be 2mm for some applied force.
The change in length of a rod of the same material & length but of HALF the cross setion
A 1
B 2
C 0.5
D 4
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q The change in length of a rod of uniform cross section was found to be 2mm for some applied force.
The change in length of a rod of the same material & length but of twice the diameter
A 1
B 2
C 0.5
D 4
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q The change in length of a rod of uniform cross section was found to be 2mm for some applied force.
The change in length of a rod of the same material & length but of half the diameter
A 1
B 2
C 0.5
D 4
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Poissons ratio for rubber is _____ than that of steel.
A larger
B smaller
C equal
D cannot be said
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q Modulus of elasticity for rubber is _____ than that of steel.
A larger
B smaller
C equal
D cannot be said
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods A & B of diffrent materials have the same length,area of cross section &
B dLa = .5 dLb
C dLa = dLb
D dLa = 4 dLb
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods A & B of diffrent materials have the same length,area of cross section &
C dLa = dLb
D none of above
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods A & B of diffrent materials have the same length,area of cross section &
are subjected to the same axial force.If Ea = 2Eb & Da =2Db, Then,__________
B dLa = .5 dLb
C dLa = dLb
D none of above
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q Two rods A & B of diffrent materials have the same length,area of cross section &
are subjected to the same axial force.If Ea = 2Eb & Db =2Da, Then,__________
B dLa = .5 dLb
C dLa = 2dLb
D none of above
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q If V is the volume of a rectangular bar subjected to a three dimensional stress state &
the Poissons ratio for the material is 0.5, the change in volume of the bar will be _____.
A V
B 2V
C 0.5V
D 0
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,E = 3K.The value of Poissons ratio for the material will be______.
A 0
B 0.25
C 0.5
D 0.75
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,E = 1.5K.The value of Poissons ratio for the material will be______.
A 0
B 0.25
C 0.5
D 0.75
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,the poissons ratio is 0.The relation between modulus of elasticity E &
A 0
B 3K
C 1.5K
D 1.2K
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,the poissons ratio is 0.5.The relation between modulus of elasticity E &
A 0
B 3K
C 1.5K
D 1.2K
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,the poissons ratio is 0.3.The relation between modulus of elasticity E &
A 0
B 3K
C 1.5K
D 1.2K
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,the poissons ratio is 0.The relation between modulus of elasticity E &
A 0
B 2G
C 3G
D 2.5G
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,the poissons ratio is 0.5.The relation between modulus of elasticity E &
A 0
B 2G
C 3G
D 2.5G
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q For a certain material,the poissons ratio is 0.25.The relation between modulus of elasticity E &
A 0
B 2G
C 3G
D 2.5G
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q For any material,the maximum value of E in terms of G is E=______
A G
B 2G
C 3G
D 2.5G
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q For any material,the minimum value of E in terms of G is E=______
A G
B 2G
C 3G
D 2.5G
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q For any material,the minimum value of G in terms of E is G=______
A E
B 2E
C E/3
D E/2
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q For any material,the maximum value of G in terms of E is G=______
A E
B 2E
C E/3
D E/2
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q For any material,the maximum value of E in terms of K is E=______
A 0
B 2K
C 3K
D 2.5K
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q For any material,the minimum value of E in terms of K is E=______
A 0
B 2K
C 3K
D 2.5K
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q For any material,the minimum value of K in terms of E is K=_____
A E
B 2E
C E/3
D E/2
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q If E=3K, then G=______
A 0
B 1.5K
C K
D (6/7)K
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q If E=2K, then G=______
A 0
B 1.5K
C K
D (6/7)K
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q If 4E=9K, then G=______
A 0
B 1.5K
C K
D (6/7)K
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q If 2G=3K, then E=_____
A 0
B 3K
C K
D 2K
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q If 7G=6K, then E=_____
A 0
B 3K
C K
D 2K
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(T),Sy=50MPa(C) & Sz=50 MPa(T).If the modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25,
A 0
B 0.125
C 0.25
D 0.375
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=100MPa(T),Sy=100MPa(C) & Sz=100 MPa(T).If the modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25,
A 0
B 0.125
C 0.25
D 0.375
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(T),Sy=50MPa(C) & Sz=0.If the modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25,
A 0
B 0.125
C 0.25
D 0.375
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(T),Sy=50MPa(T) & Sz=50 MPa(T).If the modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25,
A 0
B 0.125
C 0.25
D 0.375
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(T),Sy=50MPa(T) & Sz=100 MPa(C).If the modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25,
A 0
B 0.125
C 0.25
D 0.375
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(T) Sz=0.The modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25.
If the change in volume of the cube is requierd to be zero,the force to be applied along Y-direction is ______
A 0
B 5kN(T)
C 5kN(C)
D 0.5kN(T)
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(C) Sz=0.The modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25.
If the change in volume of the cube is requierd to be zero,the force to be applied along Y-direction is ______
A 0
B 5kN(T)
C 5kN(C)
D 0.5kN(T)
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(C) Sz=100 MPa(T).The modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25.
If the change in volume of the cube is requierd to be zero,the force to be applied along Y-direction is ______
A 0
B 5kN(T)
C 5kN(C)
D 0.5kN(T)
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A steel cube of dimensions 10 mmx 10 mmx 10 mm is subjected to stresses
Sx=50MPa(T) Sz=100 MPa(C).The modulus of elasticity of steel is 200GPa & Poissons ratio is 0.25.
If the change in volume of the cube is requierd to be zero,the force to be applied along Y-direction is ______
A 0
B 5kN(T)
C 5kN(C)
D 0.5kN(T)
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q If v=0,then G=____
A 0
B 3K
C (3/2)K
D 2K
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q If v=0.5,then G=____
A 0
B 3K
C (3/2)K
D 2K
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q If v=0.1,then G=____
A 0
B (12/11)K
C (13/12)K
D 2K
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q If v=0.2,then G=____
A 0
B (12/11)K
C K
D (3/4)K
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q If v=0.25,then G=____
A 0
B (12/11)K
C (3/5)K
D (3/4)K
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A strain of 4 x 10^-3 was observed for a wire of length 200mm.
A 50
B 5
C 0.5
D 0.8
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q A strain of 4 x 10^-3 was observed for a wire of length 200mm & diameter 20 mm.If the poissons ratio is 0.25,
A 0.02
B 0.05
C 0.5
D 0.8
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A strain of 4 x 10^-4 in a particular specimen was observed to be accompanied by a stress of 80 MPa.
A 80 GPa
B 200 GPa
C 133.33 GPa
D 200 MPa
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
A 80 GPa
B 200 GPa
C 133.33 GPa
D 200 MPa
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A strain of 4 x 10^-4 in a particular specimen was observed to be accompanied by a stress of 80 MPa.
A 80 GPa
B 200 GPa
C 133.33 GPa
D 200 MPa
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A stepped bar of steel consists of a portion with cross setion area 500mm2 connected to a portion
with cross section area 750mm2.The maximum axial tensile force that can be applied to the bar at the ends without
A 50
B 75
C 100
D 150
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A stepped bar of steel consists of a portion with cross setion area 500mm2 connected to a portion
with cross section area 1000 mm2.Each portion has a length of 1m.The maximum elongation of the bar
by applying an axial tensile force at the ends without exceeding a stress of 100MPa is _____mm.
A 0.5
B 0.75
C 0.1
D 0.15
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A strip of steel (E=200GPa,v=0.25) has a length of 1m,width 200mm & thickness of 10 mm.
A line of length 1 m is drawn parallel to its length on one of its side surfaces.
When the strip is subjected to an axial tensile force of 100kN, the length of the line will be _____mm.
A 1000
B 1000.25
C 999.75
D 0.25
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A strip of steel (E=200GPa,v=0.25) has a length of 1m,width 200mm & thickness of 10 mm.
A line of length 1 m is drawn parallel to its length on one of its side surfaces.
When the strip is subjected to an axial compressive force of 100kN, the length of the line will be _____mm.
A 1000
B 1000.25
C 999.75
D 0.25
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A strip of steel (E=200GPa,v=0.25) has a length of 1m,width 200mm & thickness of 10 mm.
A line of length 200 mm is drawn parallel to its length on one of its side surfaces.
When the strip is subjected to an axial tensile force of 100kN, the length of the line will be _____mm.
A 199.99375
B 200.00625
C 200.25
D 199.75
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A strip of steel (E=200GPa,v=0.25) has a length of 1m,width 200mm & thickness of 10 mm.
A line of length 200 mm is drawn parallel to its length on one of its side surfaces.
When the strip is subjected to an axial compressive force of 100kN, the length of the line will be _____mm.
A 199.99375
B 200.00625
C 200.25
D 199.75
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A metal plate of length L & width b has a circle drawn on it.If it is subjected to a tensile
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A metal plate of length L & width b has a circle drawn on it.If it is subjected to a tensile
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A metal plate of length L & width b has a circle drawn on it.If it is subjected to two mutually
perpendicular & equal tensile stresses S acting along its length & width,the circle will_______
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q A metal plate of length L & width b has a circle drawn on it.If it is subjected to a
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A metal plate of length L & width b has a circle drawn on it.If it is subjected to a
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A metal plate of length L & width b has a circle drawn on it.If it is subjected to two mutually
perpendicular & equal compressive stresses S acting along its length & width, the circle will ________.
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
The tempreature at which the length of rail decreases by 1.2 mm is __________ `C.
A 10
B 15
C 25
D 35
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
The tempreature at which the length of rail increases by 1.2 mm is __________ `C.
A 10
B 15
C 25
D 35
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Three steel rods A,B & C have areas of cross sections Aa >Ab > Ac.All the rods have the
same length & are subjected to the same change in temperature.The change in length will be maximum for ________.
A B
B A
C none
D C
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q Three steel rods A,B & C have areas of cross sections Aa >Ab > Ac.All the rods have the
same length,are contrained by rigid supports at both ends & are subjected to
the same change in temperature. The stress will be maximum for ________.
A A
B B
C C
D none
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q Three steel rods A,B & C have areas of cross sections Aa >Ab > Ac.All the rods have the
same length,are contrained by rigid supports at both ends & are subjected to
the same change in temperature. The force exerted on the supports will be maximum for ________.
A A
B B
C C
D none
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q Three steel rods A,B & C have areas of cross sections La >Lb > Lc.All the rods have the
same areas of cross section & are subjected to the same change in temperature.The change
A A
B B
C C
D none
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q Three steel rods A,B & C have areas of cross sections La >Lb > Lc.All the rods have the
same areas of cross section,are constrained by rigid supports at both ends &
are subjected to the same change in temperature.The stress will be maximum for_______.
A A
B B
C C
D none
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The steel rod (a =12 X 10^-6 /`C & E=200GPa) of length 500 mm & area of cross section 200 mm2
A 120
B 72
C 0
D 80
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q The steel rod (a =12 X 10^-6 /`C & E=200GPa) of length 500 mm & area of cross section 200 mm2
A 120
B 72
C 0
D 80
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The steel rod (a =12 X 10^-6 /`C & E=200GPa) of length 500 mm & area of cross section 200 mm2
is fixed at one end to a rigid support & a support which yeilds by 0.1 mm at the other.It is initially at a temperature of 20`C.
A 120
B 72
C 0
D 80
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q The steel rod (a =12 X 10^-6 /`C & E=200GPa) of length 500 mm & area of cross section 200 mm2
is fixed at one end to a rigid support & a support which yeilds by 0.2 mm at the other.It is initially at a temperature of 20`C.
A 120
B 72
C 0
D 80
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A copper rod(a=17 X 10^-6 /`C & E=100GPa) is fixed at one end to a rigid support & there is a gap
of 1 mm between its other end & another rigid support at a temperature of 20`C.The rod will be stress
A 58.82
B 78.82
C 100
D none
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A copper rod(a=17 X 10^-6 /`C & E=100GPa) is fixed at one end to a rigid support & there is a gap
of 1 mm between its other end & another rigid support at a temperature of 20`C.If its temperature is increased by 50`C,
A -15
B 15
C 0
D none
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A copper rod(a=17 X 10^-6 /`C & E=100GPa) is fixed at one end to a rigid support & there is a gap
of 1 mm between its other end & another rigid support at a temperature of 20`C.If its temperature is increased by 75`C,
A 0
B 27.5
C 53
D 70
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A copper rod(a=17 X 10^-6 /`C & E=100GPa) is fixed at one end to a rigid support & there is a gap
of 1 mm between its other end & another rigid support at a temperature of 20`C.If its temperature is increased by 90`C,
A 0
B 27.5
C 53
D 70
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A copper rod(a=17 X 10^-6 /`C & E=100GPa) is fixed at one end to a rigid support & there is a gap
of 1 mm between its other end & another rigid support at a temperature of 20`C.If its temperature is increased by 100`C,
A 0
B 27.5
C 53
D 70
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q A hole of diameter 25 mm is to be drilled in a metal sheet of thickness 4 mm & shearing strength 120 Mpa.
A 58.9
B 235.62
C 37.7
D 4.8
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A hole of diameter 25 mm is to be drilled in a metal sheet of thickness 4 mm & shearing strength 120 Mpa.
A 76.8
B 19.2
C 37.7
D 25
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A circular hole is to be drilled in a metal sheet of thickness 4 mm.The ultimate shearing strength
of metal is 120MPa & the safe compressive stress developed in the punch 80 MPa.
A 24
B 10.7
C 32
D 12
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
A 31.83
B 63.66
C 15.92
D 20
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A rivet of diameter 20 mm is in a state of double shear & is subjected to a shear force of 210kN.
A 31.83
B 63.66
C 15.92
D 20
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A rivet of diameter 20 mm is in a state of single shear & has a ultimate shear stress of 200 MPa.
The shear force that will cause the rivet to fail in shear is _____MPa.
A 125.66
B 31.42
C 62.83
D 100
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A steel rod is enclosed centrally in a hollow steel tube.The composite rod is subjected to an axial force P.
If Pr & Pt are the forces resisted by rod & tube respctively, & Ar & At are their cross section areas, then_______
A (Pr/Pt)=(Ar/At)
B (Pr/Pt)=(At/Ar)
C Pr -Pt= Ar-At
D Pr + Pt = Ar + At
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q A steel tube (E = 200 GPa) has an internal diameter of 40 mm,thickness 10 mm & a length of 2 m.
A 0.283
B 50.13
C 0.85
D 0.113
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A steel tube (E = 200 GPa) has an internal diameter of 40 mm,thickness 10 mm & a length of 2 m.
If it is subjected to an axial pull of 80kN,the change in the length of the tube will be ______mm.
A 0.283
B 50.13
C 0.85
D 0.113
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A steel bar ABC (E =200 GPa) is 1 m long.For AB =0.7 m,it has cross section area of 500 mm2 &
for BC =0.3 m the cross section area is 400 mm2.The bar is subjected to an axial pull of 100 kN.
A AB
B BC
C same throught
D none of above
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q A steel bar ABC (E =200 GPa) is 1 m long.For AB =0.7 m,it has cross section area of 500 mm2 &
for BC =0.3 m the cross section area is 400 mm2.The bar is subjected to an axial pull of 100 kN.
A 200
B 225
C 250
D 300
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q A steel bar ABC (E =200 GPa) is 1 m long.For AB =0.7 m,it has cross section area of 500 mm2 &
for BC =0.3 m the cross section area is 400 mm2.If maximum stress in the bar is not to
exeed 200 MPa,the maximum axial force that can be applied is _______Mpa
A 100
B 120
C 150
D 80
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q The modulus of elasticity of a material is 210 GPa & its modulus of rigidity is 75 GPa.
A 210
B 75
C 350
D none
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q The modulus of elasticity of a material is 210 GPa & its modulus of rigidity is 75 GPa.
A 0
B 0.2
C 0.3
D 0.4
Ans -D-
-----------------------------------------------------------------------------------------------------------------------
Q The modulus of rigidity of a material is 75 GPa & its Poissons ratio is 0.4.
A 210
B 75
C 350
D none
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The bulk modulus of a material is 350 GPa & its Poissons ratio is 0.4.
A 210
B 75
C 350
D none
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The bulk modulus of a material is 350 GPa & its modulus of rigidity is 75 GPa.
A 210
B 75
C 350
D none
Ans -A-
-----------------------------------------------------------------------------------------------------------------------
Q The modulus of elasticity of a material is 210 GPa & its Poissons ratio is 0.4.
A 210
B 75
C 350
D none
Ans -C-
-----------------------------------------------------------------------------------------------------------------------
Q The modulus of elasticity of a material is 210 GPa & its Poissons ratio is 0.4.
A 210
B 75
C 350
D none
Ans -B-
-----------------------------------------------------------------------------------------------------------------------
Q Stress does not depend upon_______.
A applied
B area of c/s
C modulus of elasticity
D none of above
Ans -C-
-----------------------------------------------------------------------------------------------------------------------