the reducer to rotated the main shaft of the main mill. 1 Driving System--MTW Series Mill
MTW mill adopted the bevel gear integral
transmission. It easy to install and adjust, longer service life. It can achieve higher transmission efficiency save the space and lower the investment costs. 2 Internal Thin Oil Lubrication System
For MTM, the lubrication media is grease. The
disadvantages are large lubrication resistance, higher temperature, short bearing life and higher cost. Built-in lubrication pump is integrated in MTW series Trapezium Mill.Thus lubrication between the main shaft bearing and bevel gear shaft gearing can be easily realized without any external or additional lubrication pump&station. 3 Curved Air Duct
MTM mill use Straight type air duct. MTW
series Trapezium mill use curved surface duct. Tangential air flow inlet is more smoother. The resistance is smaller. The internal outlet direction is good for the distribution of the material. It won’t cause the raw material jam. 4 Curved Surface Shovel with Exchangeable Blade
MTW series mill adopted curved surface
shovel with split design. The blade is made of high wear resistance alloy material and exchangeable separately. MTM The curved surface shovel has a longer service life. Once the MTM shovel was wear out, you need change the whole part.
MTW 5 No Resistance Inlet Volute
About MTW mill, the inner surface of the
internal door and inlet volute are in the same curved surface. So that the eddy current effects can be effectively avoided and reduce the powder consumption.
MTM Volute MTW Volute
6 Connection&Appearance
MTW series mill adopted the overall
streamlined design which can offer elegant appearance and reasonable MTM inners to reduce airflow resistance and dust accumulation.