Академический Документы
Профессиональный Документы
Культура Документы
DESCRIPTION
If the ECU stores DTC, the VSC warning light turns on in the combination meter. The skid control ECU is
connected to the combination meter via the CAN and MPX communications.
WIRING DIAGRAM
1 of 3 10/25/2018, 5:19 PM
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: V... https://one.tis.toyota.com/t3Portal/document/rm/RM00B0U/xhtml/RM0...
INSPECTION PROCEDURE
NOTICE:
When replacing the ABS and traction actuator (Skid control ECU), perform zero point calibration .
PROCEDURE
2 of 3 10/25/2018, 5:19 PM
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: V... https://one.tis.toyota.com/t3Portal/document/rm/RM00B0U/xhtml/RM0...
(a) Select the item below in the ACTIVE TEST, use the intelligent tester (with CAN VIM) to generate a
control command, and then check that the VSC warning light illuminates.
ABS and traction actuator (Skid control ECU)
VSC WARN LIGHT Turns VSC warning light ON / OFF Observe combination meter
OK:
The VSC warning light turns on or off in accordance with the intelligent tester.
3 of 3 10/25/2018, 5:19 PM