Академический Документы
Профессиональный Документы
Культура Документы
Cautions
Safety Instructions
Introduction
In this manual are described method to use the product and precautions.
(Contents described in this User’s Manual may change without prior notice for
performance improvement of the product or due to change of specifications.) PC-based operation requirements
Always read this User’s Manual before using this product. Composition ERASE a function
MPIO will do our best to repay for our customer’s love via better products. Parts Name and how to use the byttons
Detailed Information on FM TUNER Mode
In accordance with the Copyright Act, behaviors to simulate, copy, reproduce
or translate all or some of software and documents of this product are
Basic Operation
prohibited without prior consent by MPIO Co., Ltd. and behavior to reduce
How to disassemble/assemble
them in the pattern for electronic media or a machine to read are also necklace type of earphone
prohibited.
Operating Software Installation
* Microsoft, Windows, Windows Explorer and Windows logo are
Microsoft Corporation’s registered mark or trademark.
* Intel and Pentium are Intel Corporation’s registered trademark. Volume control
* Macintosh and Macintosh logo are Apple Computer, Inc.’s registered Music Search (Navigation)
mark or trademark.
* Systems and products included in this User’s Manual are relevant
corporation's or institutions registered mark or trademark, and or Mark
is not always specified expressively.
Features Specifications
Introduction
recognized it as a mobile disk.
FM Radio function
- FM listening, searched frequency saving, Auto preset function.
USB 2.0 High Speed Data Transmission
3D Sound Effect
USB 2.0 High Speed
- Standard Preset EQ is a basic feature and a user can set 4 types of 3D sound
effect of Pure Studio, Concert Sound, Groove and Dynamic Bass.
Multi Format Player
- MP3, WMA, ASF formats are supported as Multi-Format player.
Graphic User Interface(GUI) for user’s convenience.
- A great effort has been made on GUI to enhance a user’s convenience.
The player offers graphic-oriented icon, simple and easy-accessible menu. Li-Polymer
Navigation Max.10 hours (128Kbps MP3 file play, Volume 13)
- User’s convenience was improved since the player has a tree-type
composition like a window searcher so as to easily save and scan music file.
Contents described in this User’s Manual may change without prior notice for
Voice Recording performance improvement.
- Memory capacity actually used may be reduced by logical file system irrespective of
Firmware upgrade memory capacity of product.
- We’ll do our best to improve the performance of the player through continuous - Playing time may vary depending on operation method or menu setting.
- Data transmission rate may vary by specifications of the user’s PC.
firmware upgrade service. - PC connection using extension cords like USB hub, etc will be excluded from warranty.
- Charging times of a rechargeable battery is limited and the user must replace battery if
constant time elapses.
- Life and charging times of battery may vary depending on user’s using method.
PC-based operation requirements Composition
Introduction
- Hard disk space: 20MB or more
- Operational system: Windows 98/ 98SE/ ME/ 2000 / XP Product Warranty
Macintosh
- Main body: USB Interface (Rev V1.1) 2.0 supported, standard system and
CD-ROM Driver mounted
EX) Power Mac G3 (Blue & White)/G4 /G4 Cube, iMac / iBook, Powerbook, Transparent Case or Hard Case
Powerbook G4
- Memory: 64MB or more
Earphone and case may
- Hard disk space: 20MB or more vary depending on sale area
- Supported operational system: Macintosh OS 9.2 or more
Be sure to use USB cables provided since the MP3 Player may not Additional components (optional)
operate in connection of a PC by using extension cords.
Current track/
No. of all tracks
Introduction
Battery
Music information
Introduction
remained
(Top View) Music display screen
information
Bit rate
REW button VOL (–) button
Previous music, Volume reduce
backward wind/menu move Format type / Bit rate /
File format Playing time
Playing time display
FF button VOL (+) button
Next music, Volume increase/
backward wind/menu move Move to the upper menu
MENU button or folder in searching
Menu entry (Long key) Navigation or Menu. Weekday/day/
Information change month/year
function (Short key) Playback condition
Sector repeat function PLAY/PAUSE button Alarm setup status (only in playbak)
(when setting up A B Turn on/off/ Music file play, A.M./P.M. Time display Date and watch display
[sector repeat] in Menu) Pause / FM SCAN
FM CHANNEL
LCD display
Displays file information, mode change
(Front View)
FM listening screen and
menu setup status.
Lyric support display time
If files have lyrics, lyrics are displayed on
the LCD screen as left figure when
[MENU] [DISPLAY] [LYRICS] setting
values are set to ON from OFF.
(For change of Lyrics Menu, see page 34.)
Basic Operation
How to disassemble/assemble necklace type of earphone Either of necklace type of earphone or general high quality type of
earphone (MPIO-OP200) is provided depending on sale area.
How to disassemble How to assemble
necklace type of earphone * Disassemble both main body and earphone as below figure. necklace type of earphone
* Assemble both main body and earphone as below figure.
Basic Operation
Basic Operation
Insert the
Earphone Catch earphone Insert the earphone into
assembling and main body earphone to the earphone
status when with both hands arrow direction. hole of the main
opening the box. respectively. body for
connection.
After connection,
Catching the turn the earphone
by about 15 degree
earphone, twist anticlockwise while
and turn it by Raise the somewhat applying Completion of
about 15 degree earphone to force until connection.
clockwise. arrow direction “Tickle” sounds
(Earphone locking to pull it out. (“Tickle” sound
means complete
status released) connection status).
Battery Charging Operating Software Installation
The PC using Windows ME, Windows 2000 and Windows XP supports USB 2.0 or 1.1 Storage Device basically and
Charging with the product turns on. perceives the MP3 player as a portable storage device without installing a separate program. Thus, you can utilize the
'Low Battery' is displayed after remaining quantity of the battery icon increasingly MP3 player by using a Windows Explorer. For a computer using Windows 98/98SE, a ‘Windows 98 Device Driver’
should be installed first.
reduces and the battery must be charged.
Charging starts while the USB & Charging figure flickers on the LCD screen if How to install Windows 98 Device Driver, MPIO Utility and other Utility
connecting the USB terminal of the PC after connecting the USB cable to the
Basic Operation
Basic Operation
Bumping figure is displayed on the LCD screen if charging is completed. is done and installation begins as left figure. If
automatic execution is not done,, select the
CD-ROM from the Window Searcher and then
double click it (See below figure).
Battery Charging Display Battery Bump Display
If clicking the [Next] button, all utility programs If clicking the [Finish] button, all installation
selected currently are installed. precess are completed. The MPIO Utility icon is
The user can install necessary programs shown as below on the ground screen.
optionally. However, 3 utility programs to be
installed are as below:
- Windows 98 Device Driver
- MPIO Utility
- Windows Media Player Plug-in
Connect USB cables of both product and Click the [Next] button after firstly inserting
PC each other. Click the [Next] button if a the supplied Utility CD into the CD-ROM
‘New Hardware Addition Magician’ window and then selecting ‘CD-ROM Drive’ menu.
appears as left figure. If doing so, a Complete Window appears
after sequence to copy and install
necessary driver file in the Utility CD is
processed. Installation is completed if
clicking the [Finish] button.
Press and hold the volume key to increase and decrease the volume fast.
(However, volume control is available only while playing music of listening FM.)
Press and hold the Menu Press and hold the MENU
button and move to the button and move to the
Thus, the user can execute command such as Save/Delete of data, To make Folder in main menu screen. main menu screen.
the same method as hard disk of the PC (Save data in the or method as below). Select the FM TUNER icon Select the MUSIC icon by
by using the button using the button and
Copy & Paste: After selecting data to save, “copy” them and then “paste” them to and press the Menu button press the MENU button
shortly again. shortly again.
the movable disk.
The Mode Conversion screen
Drag & Drop: After selecting data to save, drag them with the mouse left button temporarily appears and
The Mode Conversion screen
pressed and then drop the mouse left button at the movable disk temporarily appears and
moves to the FM TUNER
moves to the MUSIC MODE.
recognized. MODE.
Detailed Information on Music Mode
Separate the PC and the player after checking the ‘Safe Removal of Hardware’ window.
Windows 2000 - Separate the PC and the player after pressing the [OK] button if the ‘Safe Removal of Hardware’ window appears.
Window XP - Separate the PC and the player if the ‘Safe Removal of Hardware’ completion message appears.
Operating methods by function REPEAT setting (Repeat Playback)
Repeat Normal- Sequential play / Repeat One –Play only one music repeatedly / Repeat All –Unlimited sequential
When setting all menu, press the Volume (+) button to return to the upper play / Random – Random sequential play / Directory Normal – Sequential play of music only in folder /
menu without setting values saved. (Menu escape function) Directory All - Unlimited sequential play of music only in folder /
Directory Random - Unlimited sequential play of music only in folder at random
Select the REPEAT icon after entering Select desired play status after
Detailed Information on Music Mode
Listening to music into the Menu button by pressing and entering into the MENU button by pressing
Watch function
NAVIGATION (music find)
Press the MENU button shortly while playing music or listening to FM radio.
Enter into the MENU screen by Search desired music by using the button. Format type, bit rate and playing time can be checked during play of music, and time
pressing and holding the MENU Then press the button to play the music. is displayed on the whole LCD screen if pressing the Menu button once again shortly.
button while playing and then Even in play of FM radio, time is displayed if pressing the Menu button shortly.
select the Navigation icon.
* If pressing any button shortly with backlight turned off in all modes, the button is used as
function to turn on only backlight. Every button performs its original function after the backlight
turns on. The purpose is to prevent unnecessary malfunction instead of the hold button of the unit.
However, any button immediately performs its original function when the backlight continues to Using Watch function
turns on or off. In addition, if leaving the backlight turned on for a long time, consumption of the * For further details of time setting and alarm time setting, see page 32 and 33.
battery increases and has an effect on playing time.
Setup of A B sector repeat function (Usefully used for foreign language study)
Select the SYSTEM icon after entering Select the A B icon after entering into the Select the VOICE RECORDER icon after entering into the MENU screen by pressing and
into the MENU screen by pressing sub menu by pressing the MENU button shortly. holding the MENU button. Select a desired recording quality after entering into the sub
and holding the MENU button. menu by pressing the MENU button shortly.
Detailed Information on Music Mode
Search and select voice recording file in the RECORD Folder for playing by list search in
The A B sector repeat point is released if pressing the MENU button shortly once again. NAVIGATION function or Pause status.
The ALARM icon appears on the Watch screen when setting alarm to ON.
Setup SYSTEM (AUTO PLAY, A B, RESUME, SLEEP, AUTO POWER OFF, FADE, INFO)
[ BACKLIGHT time setting ]
(OFF, 3 ~ 30 seconds, ON) Enter into the Menu screen by pressing and holding the MENU button.
However, consumption of battery increases Select the SYSTEM icon by using the button and enter into the sub menu of
and thus has an effect on playing time if
setting to ON. system by pressing the MENU button once again shortly.
Setting values are saved if pressing the MENU button shortly after entering into the
desired Menu among SYSTEM (AUTO PLAY, A B, RESUME, SLEEP, AUTO
POWER OFF, FADE, INFO) and then setting value by the button in the above
[ LCD contrast setting ] method.
(1~5 step)
: Means pressing the button shortly. It moves to the upper menu without setting values saved if pressing the Volume (+)
: Means to press and hold the button for more than a second. button when setting all menu status (Menu Exit function).
FM radio listening
Detailed Information on FM TUNER Mode
FM Screen Watch Screen FM Screen Watch Screen Menu Setup Music Mode
Fast frequency The Mode Change icon temporarily appears and moves to
search Fast channel search
the FM TUNER mode.
Upper menu move
FM TUNER Mode
Search frequency by using the button.
* MUSIC mode starts when powering ON again, and even when powering
OFF in the FM TUNER mode.
Setup SAVE CHANNEL (Searched Frequency Band Save)
Search desired FM frequency band to save by using the button. * You can change Scan mode and Channel mode from time to time if pressing
Enter into the Menu screen by pressing and holding the MENU button and then the button while listening to FM.
select the SAVE CH icon.
* SCAN mode
- This is mode to scan frequency band in the unit of 500Hz or 100KHz.
Detailed Information on FM TUNER Mode
* CHANNEL mode
- This is mode to scan frequency band in the channel upreviously saved.
in the above methods, and then setting values by using the button.
Japan
Double click to execute the ‘MPIO Utility’ icon on the ground screen of the user’s PC.
MPIO UTILITY
For No. , , proceed in the order as below:
Click the [Format & Config] button. Click the [OK] button.
Click the [OK] button if a ‘Hardware Format & Config (format and initial
safety removal’ window as below figure setup status recovery work) is
appears after a while. completed if clicking the [OK] button.
Double click to execute the ‘MPIO Utility’ icon on the ground screen of the user’s PC. Double click to execute the ‘MPIO Utility’ icon on the ground screen of the user’s PC.
MPIO UTILITY
For No. , proceed in the order as below: For No. , proceed in the order as below:
Click the [Setup Config] button. Click the [OK] button. Click the [F/W Upgrade] button. Click the [OK] button.
Click the [OK] button if a ‘Hardware Setup Config (initial setup status
safety removal’ window as below figure Select the previously downloaded ‘Upgrade.FL350.dwu’
recovery work) is completed if clicking
appears after a after a while. the [OK] button. from the [File Search] window and then click the [Open] button.