Академический Документы
Профессиональный Документы
Культура Документы
SECTION
WARNING CHIME SYSTEM
WCS B
E
CONTENTS
BASIC INSPECTION .................................... 3 PARKING BRAKE RELEASE WARNING CHIME F
: System Description ................................................10
DIAGNOSIS AND REPAIR WORKFLOW .......... 3 PARKING BRAKE RELEASE WARNING CHIME
Work Flow ................................................................. 3 : Component Parts Location ....................................11 G
PARKING BRAKE RELEASE WARNING CHIME
SYSTEM DESCRIPTION .............................. 5 : Component Description .........................................12
WARNING CHIME SYSTEM ............................... 5 KEY WARNING CHIME .............................................12 H
KEY WARNING CHIME : System Diagram .............12
WARNING CHIME SYSTEM ....................................... 5
KEY WARNING CHIME : System Description ........12
WARNING CHIME SYSTEM : System Diagram ...... 5
KEY WARNING CHIME : Component Parts Loca- I
WARNING CHIME SYSTEM : System Description
tion ...........................................................................13
...... 5
KEY WARNING CHIME : Component Description....13
WARNING CHIME SYSTEM : Component Parts
Location ..................................................................... 6 DIAGNOSIS SYSTEM (METER) ....................... 14 J
WARNING CHIME SYSTEM : Component De- CONSULT-III Function (METER/M&A) ....................14
scription ..................................................................... 7
DIAGNOSIS SYSTEM (BCM) (WITH INTELLI- K
LIGHT REMINDER WARNING CHIME ....................... 7 GENT KEY SYSTEM) ....................................... 18
LIGHT REMINDER WARNING CHIME : System
Diagram ..................................................................... 7 COMMON ITEM .........................................................18
LIGHT REMINDER WARNING CHIME : System COMMON ITEM : CONSULT-III Function (BCM - L
Description ................................................................ 7 COMMON ITEM) .....................................................18
LIGHT REMINDER WARNING CHIME : Compo-
nent Parts Location ................................................... 8 BUZZER .....................................................................19
M
LIGHT REMINDER WARNING CHIME : Compo- BUZZER : CONSULT-III Function (BCM - BUZZ-
nent Description ........................................................ 8 ER) ..........................................................................19
SEAT BELT WARNING CHIME .................................. 8 DIAGNOSIS SYSTEM (BCM) (WITHOUT IN- WCS
SEAT BELT WARNING CHIME : System Diagram TELLIGENT KEY SYSTEM) ............................. 21
...... 9
COMMON ITEM .........................................................21
SEAT BELT WARNING CHIME : System Descrip- O
tion ............................................................................ 9 COMMON ITEM : CONSULT-III Function (BCM -
COMMON ITEM) .....................................................21
SEAT BELT WARNING CHIME : Component
Parts Location ......................................................... 10 BUZZER .....................................................................21 P
SEAT BELT WARNING CHIME : Component De- BUZZER : CONSULT-III Function (BCM - BUZZ-
scription ................................................................... 10 ER) ..........................................................................22
PARKING BRAKE RELEASE WARNING CHIME .... 10 DTC/CIRCUIT DIAGNOSIS ......................... 23
PARKING BRAKE RELEASE WARNING CHIME
: System Diagram .................................................... 10 POWER SUPPLY AND GROUND CIRCUIT .... 23
OVERALL SEQUENCE
C
JSNIA0733GB M
DETAILED FLOW
1.OBTAIN INFORMATION ABOUT SYMPTOM WCS
Interview the customer to obtain as much information as possible about the conditions and environment under
which the malfunction occurred.
O
>> GO TO 2.
2.CHECK SYMPTOM P
• Check the symptom based on the information obtained from the customer.
• Check if any other malfunctions are present.
>> GO TO 3.
3.CHECK CONSULT-III SELF-DIAGNOSIS RESULTS
Connect CONSULT-III and perform self-diagnosis. Refer to MWI-30, "CONSULT-III Function (METER/M&A)".
>> GO TO 5.
5.REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace malfunctioning parts.
NOTE:
If DTC is displayed, erase DTC after repairing or replacing malfunctioning parts.
>> GO TO 6.
6.FINAL CHECK
Check that the warning buzzer in the combination meter operates normally.
Does it operate normally?
YES >> INSPECTION END
NO >> GO TO 1.
JPNIA1662GB
J
K
COMBINATION METER
• The buzzer (1) for the warning chime system is integrated in the
combination meter.
L
• The combination meter sounds the alarm buzzer installed in the
combination meter when receiving the buzzer output signal trans-
mitted from each unit.
M
WCS
JPNIA1549ZZ
BCM O
BCM receives signals from various units and transmits a buzzer output signal to the combination meter via
CAN communication if it judges that the warning buzzer should be activated.
WARNING CHIME FUNCTION LIST P
JPNIA1685ZZ
Unit Description
• Receives a buzzer output signal from the BCM with CAN communication line and sounds the B
buzzer.
• Judges whether the parking brake is released from the vehicle speed signal received from the
Combination meter ABS actuator and electric unit (control unit) with CAN communication line and the parking
brake switch signal from the parking brake switch, and sounds the buzzer if necessary. C
• Receives the seat belt buckle switch signal (driver side) from the seat belt buckle switch (driver
side) and transmits it to BCM with CAN communication line.
BCM
Based on the signals received from various units and switches, transmits the buzzer output sig- D
nal to the combination meter via CAN communication.
ABS actuator and electric unit
Transmits the vehicle speed signal to combination meter via CAN communication.
(control unit) E
Seat belt buckle switch (driver
Transmits a seat belt buckle switch signal (driver side) to the combination meter.
side)
Combination switch F
Transmits the combination switch signal to BCM.
(Lighting switch)
Driver side door switch Transmits the driver side door switch signal to BCM.
Key switch Transmits the key switch signal to BCM. G
Parking brake switch Transmits the parking brake switch signal to combination meter.
K
JPNIA1661GB
L
LIGHT REMINDER WARNING CHIME : System Description INFOID:0000000004938114
DESCRIPTION
M
With ignition switch in the OFF or ACC position, when the driver side door is open and the lighting switch is the
1st or 2nd position, the light reminder warning chime will sound.
WARNING CHIME OPERATION CONDITIONS WCS
The BCM transmits the buzzer output signal to combination meter with CAN communication line when all of
the following operation conditions are met. When combination meter receives buzzer output signal, it sounds
the buzzer.
O
Operation conditions Signal name Signal source
Ignition switch OFF or ACC position Ignition switch signal —
P
Combination switch (Lighting Combination switch
1st or 2nd position Combination switch signal
switch) (Lighting switch)
Driver side door Open (driver side door switch ON) Driver side door switch signal Driver side door switch
JPNIA1685ZZ
Unit Description
Combination meter Receives a buzzer output signal from the BCM and sounds the buzzer.
Judges the light reminder warning conditions from the signals provided by various switches and
BCM
transmits a buzzer output signal to the combination meter via CAN communication line if necessary.
Combination switch
Transmits the combination switch signal to BCM.
(Lighting switch)
Driver side door switch Transmits the driver side door switch signal to BCM.
E
JPNIA0750GB
DESCRIPTION
With ignition switch turned ON and driver seat belt unfastened, seat belt warning chime will sound for approxi- G
mately 6 seconds.
WARNING OPERATION CONDITIONS H
The BCM transmits the buzzer output signal to combination meter with CAN communication line when all of
the following operation conditions are met. When combination meter receives buzzer output signal, it sounds
the buzzer.
I
Operation conditions Signal name Signal source
Ignition switch ON Ignition switch signal —
J
Seat belt buckle switch signal (driver
Unfastened (driver side seat Seat belt buckle switch (driver side)
Seat belt (driver side) side)
belt buckle switch ON) via combination meter
(CAN communication)
K
WARNING CANCEL CONDITIONS
Warning is canceled if any of the following conditions is fulfilled.
L
Operation conditions Signal name Signal source
Ignition switch OFF Ignition switch signal —
M
Seat belt buckle switch signal (driver
Fastened (driver side seat belt Seat belt buckle switch (driver side)
Seat belt (driver side) side)
buckle switch OFF) via combination meter
(CAN communication)
6 seconds after the start of warning sound — — WCS
JPNIA1685ZZ
Unit Description
• Receives the seat belt buckle switch signal (driver side) from the seat belt buckle switch (driver
Combination meter side) and transmits it to BCM via CAN communication.
• Receives a buzzer output signal from the BCM and sounds the buzzer.
Judges the seat belt warning condition according to the seat belt buckle switch signal (driver side)
BCM received from the combination meter via CAN communication and transmits a buzzer output signal
to the combination meter via CAN communication if necessary.
Seat belt buckle switch
Transmits the seat belt buckle switch signal (driver side) to the combination meter.
(driver side)
JPNIA0751GB
DESCRIPTION
JPNIA1685ZZ
WCS
ABS actuator and electric unit (con-
trol unit)
1. Parking brake switch 2. 3. Combination meter
Refer to BRC-11, "Component Parts
Location". O
BCM
4. Refer to BCS-9, "Component Parts 5. Seat belt buckle switch (driver side)
Location".
P
Unit Description
Judges the remaining parking brake according to the vehicle speed signal received from the ABS
Combination meter actuator and electric unit (control unit) via CAN communication and the parking brake switch signal
from parking brake switch and sounds the warning buzzer.
ABS actuator and electric unit
Transmits the vehicle speed signal to the combination meter via CAN communication.
(control unit)
Parking brake switch Transmits the parking brake switch signal to the combination meter.
JPNIA1691GB
DESCRIPTION
With ignition switch in the OFF or ACC position, when the driver side door is open (driver side door switch ON)
and the key inserted into the ignition key cylinder (key switch ON), the warning chime will sound.
WARNING OPERATION CONDITIONS
The BCM transmits the buzzer output signal to combination meter with CAN communication line when all of
the following operation conditions are met. When combination meter receives buzzer output signal, it sounds
the buzzer.
JPNIA1685ZZ F
Unit Description
Combination meter Receives a buzzer output signal from the BCM and sounds the buzzer. J
Judges the key warning conditions from the signals provided by various switches and transmits a
BCM
buzzer output signal to the combination meter via CAN communication if necessary.
K
Key switch Transmits the key switch signal to BCM.
Driver side door switch Transmits the driver side door switch signal to BCM.
WCS
MAIN
Display item [Unit] Description
SIGNALS
Value of vehicle speed signal received from ABS actuator and electric unit (control
SPEED METER unit) via CAN communication.
X
[km/h] NOTE:
655.35 is displayed when the malfunction signal is received.
Vehicle speed signal value transmitted to other units via CAN communication.
SPEED OUTPUT
X NOTE:
[km/h]
655.35 is displayed when the malfunction signal is received.
ODO OUTPUT
Odometer signal value transmitted to other units via CAN communication.
[km/h or mph]
Value of the engine speed signal received from ECM via CAN communication.
TACHO METER
X NOTE:
[rpm]
8191.875 is displayed when the malfunction signal is received.
FUEL METER
X Fuel level indicated on combination meter.
[L]
Value of engine coolant temperature signal is received from ECM via CAN com-
W TEMP METER munication.
X
[°C] NOTE:
215 is displayed when the malfunction signal is input.
ABS W/L Status of ABS warning lamp detected from ABS warning lamp signal is received
[On/Off] from ABS actuator and electric unit (control unit) via CAN communication.
Status of VDC OFF indicator lamp detected from VDC OFF indicator lamp signal
VDC/TCS IND
is received from ABS actuator and electric unit (control unit) via CAN communica-
[On/Off]
tion.
SLIP IND Status of SLIP indicator lamp detected from slip indicator lamp signal received
[On/Off] from ABS actuator and electric unit (control unit) via CAN communication.
Status of brake warning lamp detected from brake warning lamp signal is received
from ABS actuator and electric unit (control unit) via CAN communication.
BRAKE W/L
NOTE:
[On/Off]
Displays “Off” if the brake warning lamp is illuminated when the valve check starts,
the parking brake switch is turned ON or the brake fluid level switch is turned ON.
DOOR W/L Status of door warning detected from door switch signal received from BCM via
[On/Off] CAN communication.
HI-BEAM IND Status of high beam indicator lamp detected from high beam request signal is re-
[On/Off] ceived from BCM via CAN communication.
TURN IND Status of turn indicator lamp detected from turn indicator signal is received from
[On/Off] BCM via CAN communication.
W/L ON HISTORY
• Stores histories when warning/indicator lamp is turned on.
• “W/L ON HISTORY” indicates the “TIME” when the warning/ indicator lamp is turned on.
• The “TIME” above is :
- 0 : The condition that the warning/indicator lamp has been turned on 1 or more times after starting the
engine and waiting for 30 seconds.
- 1 - 39 : The number of times the engine was restarted after the 0 condition.
- NO W/L ON HISTORY : Stores NO (0) turning on history of warning/indicator lamp.
NOTE:
• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets
low.
Display Item
WCS
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
×: Applicable item
Diagnosis mode
System Sub system selection item
Work Support Data Monitor Active Test
Door lock DOOR LOCK × × ×
Rear window defogger REAR DEFOGGER × ×
Warning chime BUZZER × ×
Interior room lamp timer INT LAMP × × ×
Exterior lamp HEAD LAMP × × ×
Wiper and washer WIPER × × ×
Turn signal and hazard warning lamps FLASHER × × ×
Automatic air conditioner AIR CONDITONER × ×
• Intelligent Key system
INTELLIGENT KEY × × ×
• Engine start system
Combination switch COMB SW ×
Body control system BCM ×
NVIS - NATS IMMU × × ×
Interior room lamp battery saver BATTERY SAVER × × ×
Back door TRUNK ×
Vehicle security system THEFT ALM × × ×
RAP system RETAINED PWR ×
Signal buffer system SIGNAL BUFFER × ×
TPMS TPMS (AIR PRESSURE MONITOR) × × ×
BUZZER WCS
O
CONSULT-III APPLICATION ITEMS
DATA MONITOR
Display item
Description
[Unit]
PUSH SW
Status of push-button ignition switch judged by BCM.
[On/Off]
UNLK SEN-DR
Status of unlock sensor judged by BCM.
[On/Off]
VEH SPEED 1
Value of vehicle speed signal received from combination meter with CAN communication line.
[km/h]
TAIL LAMP SW
Status of lighting switch judged by BCM using the combination switch readout function.
[On/Off]
FR FOG SW
Status of front fog lamp switch judged by BCM using the combination switch readout function.
[On/Off]
DOOR SW-DR
Status of driver side door switch judged by BCM.
[On/Off]
CDL LOCK SW
Status of door lock unlock switch judged by BCM.
[On/Off]
ACTIVE TEST
Display item
Description
[Unit]
SEAT BELT WARN TEST The seat belt warning chime operation can be checked by operating the relevant function (On/Off).
ID REGIST WARNING The ID regist warning chime operation can be checked by operating the relevant function (On/Off).
LIGHT WARN ALM The light warning chime operation can be checked by operating the relevant function (On/Off).
SYSTEM APPLICATION G
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items. H
×: Applicable item
Diagnosis mode
System Sub system selection item
Work Support Data Monitor Active Test I
Door lock DOOR LOCK × × ×
Rear window defogger REAR DEFOGGER × ×
J
Warning chime BUZZER × ×
Interior room lamp control INT LAMP × × ×
Remote keyless entry system MULTI REMOTE ENT × × × K
Exterior lamp HEAD LAMP × × ×
Wiper and washer WIPER × × ×
L
Turn signal and hazard warning lamps FLASHER × ×
• Automatic air conditioner
AIR CONDITONER × ×
• Manual air conditioner
M
Combination switch COMB SW ×
Body control system BCM ×
NVIS - NATS IMMU × × × WCS
Interior room lamp battery saver BATTERY SAVER × × ×
Back door TRUNK ×
O
Vehicle security system THEFT ALM × × ×
RAP system RETAINED PWR × ×
Signal buffer system SIGNAL BUFFER × × P
TPMS TPMS (AIR PRESSURE MONITOR) × × ×
Panic alarm system PANIC ALARM ×
BUZZER
DATA MONITOR
Display item
Description
[Unit]
IGN ON SW
Status of ignition switch judged by BCM.
[On/Off]
KEY ON SW
Status of key switch judged by BCM.
[On/Off]
DOOR SW-DR
Status of driver side door switch judged by BCM.
[km/h]
REVERSE SW CAN
This item is displayed, but cannot be monitored.
[On/Off]
TAIL LAMP SW
Status of lighting switch judged by BCM using the combination switch readout function.
[On/Off]
FR FOG SW
Status of front fog lamp switch judged by BCM using the combination switch readout function.
[On/Off]
BUCKLE SW Status of seatbelt buckle switch (driver side) received from combination meter with CAN communica-
[On/Off] tion line.
VEHICLE SPEED
Value of vehicle speed signal received from combination meter with CAN communication line.
[km/h]
ACTIVE TEST
Display item
Description
[Unit]
IGN KEY WARN ALM The key warning chime operation can be checked by operating the relevant function (On/Off).
SEAT BELT WARN TEST The seat belt warning chime operation can be checked by operating the relevant function (On/Off).
LIGHT WARN ALM The light warning chime operation can be checked by operating the relevant function (On/Off).
1.CHECK FUSE C
Check for blown fuses.
Terminals
H
(+) (−) Ignition switch po- Voltage
Combination meter sition (Approx.)
Connector Terminal I
27 Ground OFF
M34 15 ACC Battery voltage
J
28 ON
Is the inspection result normal?
YES >> GO TO 3. K
NO >> Check harness between combination meter and fuse.
3.CHECK GROUND CIRCUIT
L
1. Turn ignition switch OFF.
2. Disconnect combination meter connector.
3. Check continuity between combination meter harness connector terminals and ground.
M
Combination meter
Continuity
Connector Terminal
Ground WCS
22
M34 Existed
23
Is the inspection result normal? O
YES >> INSPECTION END
NO >> Repair harness or connector.
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) P
Terminals
(+) (−) Voltage
BCM (Approx.)
Connector Terminal
Ground
70
M70 Battery voltage
57
Is the measurement value normal?
YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK GROUND CIRCUIT
Check continuity between BCM harness connector and ground.
BCM
Continuity
Connector Terminal Ground
M70 67 Existed
Does continuity exist?
YES >> INSPECTION END
NO >> Repair harness or connector.
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM) : Diag-
nosis Procedure INFOID:0000000005175552
Terminals
Ignition switch position
(+) C
BCM (−)
OFF ACC ON
Connector Terminal
70
D
Battery Battery Battery
M67
57 voltage voltage voltage
WCS
• The buzzer for warning chime system is installed in the combination meter.
• The combination meter sounds the alarm buzzer based on the signals transmitted from various units.
Component Function Check INFOID:0000000004938131
BUZZER
Under the condition of buzzer input : On
Except above : Off
Is the inspection result normal?
YES >> Replace combination meter.
NO >> Replace BCM. Refer to BCS-82, "Removal and Installation" (with Intelligent Key system) or BCS-
148, "Removal and Installation" (without Intelligent Key system).
Diagnosis Procedure INFOID:0000000004938132
Transmits a seat belt buckle switch signal (driver side) to the combination meter. B
Component Function Check INFOID:0000000004938134
BUCKLE SW D
When seat belt is fastened : Off
When seat belt is unfastened : On
E
Terminals H
(+) (-) Voltage
Condition
Combination meter (Approx.)
I
Connector Terminal
Ground
When seat belt is fastened 12 V
M34 9
When seat belt is unfastened 0V J
Is the inspection result normal?
YES >> Replace combination meter
NO >> GO TO 2. K
Terminals
Combination meter Seat belt buckle switch (driver side) Continuity WCS
Connector Terminal Connector Terminal
M34 9 B22 1 Exist
O
4. Check harness continuity between combination meter harness connector terminal and ground.
Terminals
P
Combination meter Continuity
Connector Terminal Ground
M34 9 Not existed
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair harness or connector.
Terminals
Seat belt buckle switch (driver side) Continuity
Connector Terminal Ground
B22 2 Exist
Is the inspection result normal?
YES >> INSPECTION END
NO >> Repair harness or connector.
Component Inspection INFOID:0000000004938136
Terminals
Seat belt buckle switch Condition Continuity
(driver side)
When seat belt is fastened Not existed
1 2
When seat belt is unfastened Exist
Is the inspection result normal?
YES >> INSPECTION END
NO >> Replace seat belt buckle (driver side). Refer to SB-8, "SEAT BELT BUCKLE : Removal and Instal-
lation".
WCS
P
JCNWM2404GB
JCNWM2405GB
WCS
JCNWM2406GB
JCNWM2407GB
TERMINAL LAYOUT
C
JSNIA0623ZZ
F
PHYSICAL VALUES
Terminal No.
Description G
(Wire color) Value
Condition
Input/ (Approx.)
+ – Signal name
Output
H
1
— CAN-H — — — —
(L)
2
— CAN-L — — — — I
(P)
NOTE:
The maximum voltage varies de-
pending on the specification J
(destination unit).
Ignition Speedometer operated
3 Vehicle speed signal
Ground Output switch [When vehicle speed is ap-
(V) (2-pulse) K
ON prox. 40 km/h (25 MPH)]
L
JSNIA0015GB
NOTE:
The maximum voltage varies de-
M
pending on the specification
(destination unit).
Ignition Speedometer operated
4 Vehicle speed signal
Ground Output switch [When vehicle speed is ap- WCS
(Y) (8-pulse)
ON prox. 40 km/h (25 MPH)]
O
JSNIA0012GB
Ignition
6
Ground Fuel level sensor signal Input switch —
(BR/Y)
ON
JPNIA1546ZZ
JPNIA1687GB
Ignition
13
Ground Illumination control signal Output switch
(B/R)
ON
• Lighting switch 1ST
• When meter illumination
is step 11
JPNIA1686GB
Ignition
19 Changes depending to am- C
Ground Ambient sensor signal Input switch
(V/W) bient temperature.
ON
JSNIA0014GB D
Ignition
20
Ground Ambient sensor ground — switch — 0V
(R/W)
ON E
Ignition
21
Ground Ground — switch — 0V
(B)
ON
F
Ignition
22
Ground Ground — switch — 0V
(B)
ON
G
Ignition
23
Ground Ground — switch — 0V
(B)
ON
H
Ignition
24 Fuel level sensor signal
Ground — switch — 0V
(V) ground
ON
Ignition I
25
Ground VDC ground — switch — 0V
(B)
ON
Ignition J
27
Ground Battery power supply Input switch — Battery voltage
(LG)
OFF
Ignition
28 K
Ground Ignition signal Input switch — Battery voltage
(GR)
ON
• When getting in the pas-
senger seat. L
12 V
• When passenger seat
Ignition belt is fastened.
29 Passenger seat belt warn-
Ground Input switch
(BR) ing signal • When getting in the pas- M
ON
senger seat.
0V
• When passenger seat
belt is unfastened.
WCS
Ignition
31 A/C auto amp. connection
Ground Input switch — 5V
(R) recognition signal
ON
O
Ignition
35 Engine coolant tempera- PKID0590E
Ground Output switch
(BR) ture signal 0V
ON
SKIB3651J
WCS
JCNWM2397GB
P
JCNWM2398GB
WCS
JCNWM2399GB
JCNWM2400GB
WCS
JCNWM2401GB
JCNWM2402GB
WCS
JCNWM2403GB
P
Fail-Safe INFOID:0000000005062175
FAIL-SAFE
The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.
Function Specifications
Speedometer
Tachometer Reset to zero by suspending communication.
Engine coolant temperature gauge
Illumination control When suspending communication, changes to nighttime mode.
Shift position indicator The indicator turns OFF by suspending communication.
Instantaneous fuel warning • When reception time of an abnormal signal is 2 seconds or
less, the last received datum is used for calculation to indi-
Average fuel consumption
cate the result.
Information display
Possible driving distance • When reception time of an abnormal signal is more than two
seconds, the last result calculated during normal condition is
Average vehicle speed indicated.
Buzzer The buzzer turns off by suspending communication.
ABS warning lamp
VDC OFF indicator lamp
SLIP indicator lamp The lamp turns ON by suspending communication.
EPS warning lamp
Brake warning lamp
Low tire pressure warning lamp The lamp turns ON after flashing for 1 minute.
High beam indicator lamp
Turn signal indicator lamp
Door warning lamp
Warning lamp/indicator lamp
Light indicator lamp
Engine start operation indicator lamp
Shift P warning lamp
The lamp turns OFF by suspending communication.
Oil pressure warning lamp
Malfunction indicator lamp
CRUISE indicator lamp
OD OFF indicator lamp
Low washer fluid warning lamp
Key warning lamp
AIR PRESS FR Ignition switch ON (Only when the signal from the transmitter is received)
Air pressure of front G
RH tire
Air pressure of rear
AIR PRESS RR Ignition switch ON (Only when the signal from the transmitter is received)
RH tire H
Air pressure of rear
AIR PRESS RL Ignition switch ON (Only when the signal from the transmitter is received)
LH tire
ID of front LH tire transmitter is registered Done I
ID REGST FL1
ID of front LH tire transmitter is not registered Yet
ID of front RH tire transmitter is registered Done
ID REGST FR1 J
ID of front RH tire transmitter is not registered Yet
ID of rear RH tire transmitter is registered Done
ID REGST RR1
ID of rear RH tire transmitter is not registered Yet K
ID of rear LH tire transmitter is registered Done
ID REGST RL1
ID of rear LH tire transmitter is not registered Yet
Tire pressure indicator OFF Off L
WARNING LAMP
Tire pressure indicator ON On
Tire pressure warning alarm is not sounding Off
BUZZER M
Tire pressure warning alarm is sounding On
WCS
JPMIA1438ZZ
NOTE:
Connector color
• M68, M70: Black
• M69, M71: White
PHYSICAL VALUES
F
Lighting switch 2ND
JPMIA0342JP G
2.0 V
All switch OFF 0V
Turn signal switch LH H
Lighting switch PASS
PKIB4956J
0.8 V M
All switch OFF 0V
Front wiper switch LO
WCS
Front wiper switch MIST
Combination
4 Combination switch switch Front wiper switch INT
Ground Input
(L/Y) INPUT 3 (Wiper intermit-
tent dial 4) O
Lighting switch AUTO
PKIB4958J
1.0 V P
PKIB4956J
0.8 V
All switch OFF
0V
(Wiper intermittent dial 4)
Front wiper switch HI
(Wiper intermittent dial 4)
Rear wiper switch INT
(Wiper intermittent dial 4)
1.0 V
PKIB4952J
1.9 V
PKIB4956J
0.8 V
JPMIA0587GB
8.0 - 8.5 V D
UNLOCK position 0V
JPMIA0012GB
I
1.0 - 1.5 V
K
OFF (When passenger
12 Passenger door Passenger door door closed)
Ground Input
(SB) switch switch L
PKIB4960J
7.0 - 8.0 V
ON (When passenger M
0V
door opened)
WCS
7.0 - 8.0 V P
ON (When rear RH door
0V
opened)
When bright outside of the
Close to 5 V
14 Ignition switch vehicle
Ground Optical sensor Input
(L/B) ON When dark outside of the
Close to 0 V
vehicle
JPMIA0012GB
1.0 - 1.5 V
Pressed 0V
JMKIA3838GB
Waiting
Signal receiving
JMKIA3841GB
JMKIA3838GB
C
23 Security indicator Security indica- Blinking (Ignition switch
Ground Output
(R/Y) lamp tor OFF)
D
JPMIA0590GB
12.0 V
OFF Battery voltage
E
24* Input/
Ground Dongle link Ignition switch OFF 5V
(GR/R) Output
Ignition switch is pressed Just after pressing ignition
25 Input/ F
Ground NATS antenna amp. During waiting while inserting the key into switch. Pointer of tester should
(LG) Output
the key slot. move.
1.0 - 1.5 V I
ON (A/C switch indicator:
0V
ON)
OFF 0V
J
K
28
Ground Blower fan switch Input Blower fan
(G/W) ON
L
PKIB4960J
7.0 - 8.0 V
M
29 OFF 12 V
Ground Hazard switch Input Hazard switch
(L/W) ON 0V
WCS
PKIB4960J
7.0 - 8.0 V
32 Combination switch Combination
Ground Output Front fog lamp switch ON
(LG) OUTPUT 5 switch
(Wiper intermittent dial 4)
Rear wiper switch ON
(Wiper intermittent dial 4)
Any of the condition below
with all switch OFF
• Wiper intermittent dial 1
• Wiper intermittent dial 2 PKIB4956J
• Wiper intermittent dial 6 1.0 V
• Wiper intermittent dial 7
PKIB4960J
7.0 - 8.0 V
PKIB4960J
7.0 - 8.0 V D
34 Combination switch Combination Lighting switch 2ND
Ground Output (Wiper intermittent dial 4)
(W) OUTPUT 3 switch
Lighting switch HI
E
(Wiper intermittent dial 4)
Rear washer switch ON
(Wiper intermittent dial 4) F
Any of the condition below
with all switch OFF
PKIB4958J
• Wiper intermittent dial 1 G
1.2 V
• Wiper intermittent dial 2
• Wiper intermittent dial 3
Combination PKIB4960J
J
35 Combination switch switch 7.0 - 8.0 V
Ground Output
(R/L) OUTPUT 2 (Wiper intermit- Lighting switch 2ND
tent dial 4)
Lighting switch PASS K
Front wiper switch INT
L
Front wiper switch HI
PKIB4958J
1.2 V
M
WCS
All switch OFF
O
Combination PKIB4960J
1.2 V
38 OFF or ACC 0V
Ground IGN feedback Input Ignition switch
(O) ON Battery voltage
39 Input/
Ground CAN-H — —
(L) Output
40 Input/
Ground CAN-L — —
(P) Output
OFF
43 Back door (When back door closed)
Ground Back door switch Input
(W) switch
PKIB4960J
9.5 - 10.0 V
ON
0V
(When back door opened)
Rear wiper stop position 12 V
44 Rear wiper stop po- Ignition switch
Ground Input Any position other than
(LG) sition ON 0V
rear wiper stop position
JPMIA0012GB
1.0 - 1.5 V
LOCK position 0V
JPMIA0012GB
1.0 - 1.5 V
UNLOCK position 0V
7.0 - 8.0 V
ON (When driver door
0V
opened)
7.0 - 8.0 V D
ON (When rear door LH
0V
opened)
Back door is closed (Back
E
12 V
Luggage room door lamp turns OFF)
49
Ground Luggage room lamp Output lamp switch Back door is opened
(Y)
DOOR position (Back door lamp turns 0V F
ON)
54 OFF (Stopped) 0V
Ground Rear wiper Output Rear wiper
(L/W) ON (Activated) 12 V G
UNLOCK (Actuator is acti-
12 V
55 vated)
Ground Rear door UNLOCK Output Rear door H
(G) Other then UNLOCK (Ac-
0V
tuator is not activated)
Interior room lamp battery saver is activated.
0V
(Cuts the interior room lamp power supply) I
56 Interior room lamp Interior room lamp battery saver is not acti-
Ground Output
(L) power supply vated.
12 V
(Outputs the interior room lamp power sup- J
ply)
57 Battery power sup-
Ground Input Ignition switch OFF Battery voltage
(Y) ply
K
UNLOCK (Actuator is acti-
12 V
59 Passenger door UN- vated)
Ground Output Passenger door
(G) LOCK Other then UNLOCK (Ac-
0V L
tuator is not activated)
Turn signal switch OFF 0V
60 Ignition switch
Ground Turn signal LH Output
(W/B) ON Turn signal switch LH WCS
PKIC6370E O
6.0 V
61 Ignition switch
Ground Turn signal RH Output
(W/L) ON Turn signal switch RH
PKIC6370E
6.0 V
Standby state
OCC3881D
OCC3880D
D
When Intelligent Key is
not in the antenna detec-
tion area
E
When the driver JMKIA3838GB
JMKIA3839GB H
JMKIA3838GB
When the driver
79
Ground
Driver door antenna
Output
door request K
(V) (-) switch is operat-
ed with ignition
switch OFF
L
When Intelligent Key is in
the antenna detection
area
M
JMKIA3839GB
WCS
JMKIA3839GB
JMKIA3839GB
JMKIA3838GB
When the back
82 Back door antenna door request
Ground Output
(W/B) (+) switch is operat-
ed with ignition
switch OFF
When Intelligent Key is in
the antenna detection
area
JMKIA3839GB
JMKIA3838GB
I
84 Room antenna (+) Ignition switch
Ground Output
(Y/G) (Instrument panel) OFF
J
JMKIA3839GB
L
M
When Intelligent Key is
not in the antenna detec-
tion area
WCS
JMKIA3838GB
JMKIA3839GB
JMKIA3838GB
JMKIA3839GB
JMKIA3838GB
JMKIA3839GB
Push-button ig- ON 12 V
90 Push-button ignition
Ground Output nition switch illu-
(W/L) switch illumination OFF 0V
mination
JPMIA1554GB
6.0 - 7.0 V
LOCK or UNLOCK D
94 Steering lock unit Input/
Ground Steering lock
(Y/R) communication Output
JMKIA0066GB E
96 OFF 0V
Ground ACC relay control Output Ignition switch H
(BR/W) ACC or ON 12 V
When selector lever is in
Battery voltage
97 Ignition switch P or N position
Ground Starter relay control Output I
(L/R) ON When selector lever is not
0V
in P or N position
99 OFF or ACC 0V
Ground Ignition relay control Output Ignition switch
(W/R) ON 12 V K
Push-button ig- Pressed 0V
100 Push-button ignition
Ground Input nition switch
(L/O) switch (push switch) Not pressed 12 V
(push switch) L
102 Selector lever P/N P or N position Battery voltage
Ground Input Selector lever
(G) position Except P and N positions 0V
CVT shift selector M
104
Ground (detention switch) Output Ignition switch ON 12 V
(Y/R)
power supply
105
Ground Stop lamp switch 2 Input Ignition switch OFF Battery voltage
WCS
(B/O)
JCMWM4068GB
WCS
JCMWM4069GB
JCMWM4070GB
WCS
JCMWM4071GB
JCMWM4072GB
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority
chart.
Priority DTC A
1 B2562: LOW VOLTAGE
• U1000: CAN COMM CIRCUIT
2
• U1010: CONTROL UNIT (CAN) B
• B2192: ID DISCORD BCM-ECM
• B2193: CHAIN OF BCM-ECM
3 • B2195: ANTI-SCANNING C
• B2196: DONGLE NG
• B2198: NATS ANTENNA AMP
• B2013: ID DISCORD BCM-S/L
• B2014: CHAIN OF S/L-BCM D
• B2553: IGNITION RELAY
• B2555: STOP LAMP
• B2556: PUSH-BTN IGN SW E
• B2557: VEHICLE SPEED
• B2601: SHIFT POSITION
• B2602: SHIFT POSITION
• B2603: SHIFT POSI STATUS F
• B2604: PNP/CLUTCH SW
• B2605: PNP/CLUTCH SW
• B2608: STARTER RELAY
• B2609: S/L STATUS G
• B260B: STEERING LOCK UNIT
• B260C: STEERING LOCK UNIT
• B260D: STEERING LOCK UNIT
• B260F: ENG STATE SIG LOST H
• B2612: S/L STATUS
• B2614: BCM
4
• B2615: BCM
• B2616: BCM
I
• B2618: BCM
• B2619: BCM
• B261A: PUSH-BTN IGN SW J
• B26E9: LOCK MALFUNCTION
• B26EF: STRG LCK RELAY OFF
• B26F0: STRG LCK RELAY ON
• B26F1: IGN RELAY OFF K
• B26F2: IGN RELAY ON
• B26F3: START CONT RLY ON
• B26F4: START CONT RLY OFF
• B26F5: STRG LCK STS SW L
• B26F6: BCM
• B26F7: BCM
• B26F8: BCM
• B26FC: KEY REGISTRATION M
• C1729: VHCL SPEED SIG ERR
• U0415: VEHICLE SPEED
WCS
NOTE:
The details of time display are as follows.
• CRNT: A malfunction is detected now.
• PAST: A malfunction was detected in the past.
IGN counter is displayed on Freeze Frame Data. For details of Freeze Frame Data, refer to BCS-18, "COM-
MON ITEM : CONSULT-III Function (BCM - COMMON ITEM)".
Freeze Frame
Data
Tire pressure
•Vehicle Speed Intelligent Key Reference
CONSULT display Fail-safe monitor warning
•Odo/Trip Meter warning lamp ON page
lamp ON
•Vehicle Condi-
tion
No DTC is detected.
further testing — — — — —
may be required.
U1000: CAN COMM — — — — BCS-39
U1010: CONTROL UNIT (CAN) — — — — BCS-40
U0415: VEHICLE SPEED × — × — BCS-41
B2013: ID DISCORD BCM-S/L × × × — SEC-45
B2014: CHAIN OF S/L-BCM × × × — SEC-46
B2192: ID DISCORD BCM-ECM × — — — SEC-35
B2193: CHAIN OF BCM-ECM × — — — SEC-37
B2195: ANTI-SCANNING × — — — SEC-38
B2196: DONGLE NG × — — — SEC-39
NOTE: Off
REVERSE SW CAN
The item is indicated, but not used. On L
Lighting switch OFF Off
TAIL LAMP SW
Lighting switch 1ST On
M
Front fog lamp switch OFF Off
FR FOG SW
Front fog lamp switch ON On
The seat belt (driver side) is fastened. [Seat belt switch (driver side) OFF] Off WCS
BUCKLE SW
The seat belt (driver side) is unfastened. [Seat belt switch (driver side) ON] On
NOTE:
TRNK/HAT MNTR Off O
The item is indicated, but not monitored.
Ignition switch OFF Off
ACC SW
Ignition switch ACC or ON On
P
NOTE:
KYLS TRNK/HAT Off
The item is indicated, but not monitored.
PANIC button of key fob is not pressed Off
KEYLESS PANIC
PANIC button of key fob is pressed On
Lighting switch OFF Off
HI BEAM SW
Lighting switch HI On
WCS
JPMIA1439ZZ
NOTE:
• M65, M66: White
• M67: Black
PHYSICAL VALUES
F
Lighting switch 2ND
JPMIA0342JP G
2.0 V
All switch OFF 0V
Turn signal switch LH H
Lighting switch PASS
PKIB4956J
0.8 V M
All switch OFF 0V
Front wiper switch LO
WCS
Front wiper switch MIST
Combination
4 Combination switch switch Front wiper switch INT
Ground Input
(L/Y) INPUT 3 (Wiper intermit-
tent dial 4) O
Lighting switch AUTO
PKIB4958J
1.0 V P
PKIB4956J
0.8 V
All switch OFF
0V
(Wiper intermittent dial 4)
Front wiper switch HI
(Wiper intermittent dial 4)
Rear wiper switch INT
(Wiper intermittent dial 4)
1.0 V
PKIB4952J
1.9 V
PKIB4956J
0.8 V
PKIB4960J
7.0 - 8.0 V D
UNLOCK position 0V
I
OFF (When passenger
12 Passenger door Passenger door door closed)
Ground Input J
(SB) switch switch
PKIB4960J
7.0 - 8.0 V
K
ON (When passenger
0V
door opened)
JPMIA0012GB
1.0 - 1.5 V
JPMIA0338JP
Waiting
Signal receiving
PIIB7729J
C
23 Security indica- Blinking (Ignition switch
Ground Security indicator Input
(R/Y) tor OFF)
D
JPMIA0014GB
11.3 V
OFF 12 V
E
24 Input/
Ground Dongle link Ignition switch OFF 5V
(GR/R) Output
Ignition switch is pressed Just after pressing ignition
25 Immobilizer anten- Input/ F
Ground During waiting while inserting the key into switch. Pointer of tester should
(LG) na (Rx, Tx) Output
the key slot. move.
1.0 - 1.5 V
J
27 ON (A/C switch indicator:
0V
(Y/G)*2 Ground Input ON)
(Y/R)*3
K
JPMIA0012GB
M
1.0 - 1.5 V
ON 0V
WCS
PKIB4960J
28 7.0 - 8.0 V
Ground Input
(G/W)
7.0 - 8.0 V
Blower fan switch ON 0V
JPMIA0589GB
8.0 - 9.0 V
PKIB4960J
7.0 - 8.0 V
32 Combination switch Combination
Ground Output Front fog lamp switch ON
(LG) OUTPUT 5 switch
(Wiper intermittent dial 4)
Rear wiper switch ON
(Wiper intermittent dial 4)
Any of the condition below
with all switch OFF
• Wiper intermittent dial 1
• Wiper intermittent dial 2 PKIB4956J
• Wiper intermittent dial 6 1.0 V
• Wiper intermittent dial 7
PKIB4960J
7.0 - 8.0 V D
33 Combination switch Combination Lighting switch 1ST
Ground Output (Wiper intermittent dial 4)
(Y/L) OUTPUT 4 switch
Lighting switch AUTO
E
(Wiper intermittent dial 4)
Rear wiper switch INT
(Wiper intermittent dial 4) F
Any of the condition below
with all switch OFF
PKIB4958J
• Wiper intermittent dial 1 G
1.2 V
• Wiper intermittent dial 5
• Wiper intermittent dial 6
PKIB4960J
7.0 - 8.0 V
J
WCS
Combination PKIB4960J
1.2 V
PKIB4960J
Combination
36 Combination switch switch 7.0 - 8.0 V
Ground Output
(L/O) OUTPUT 1 (Wiper intermit- Turn signal switch RH
tent dial 4)
Turn signal switch LH
Front wiper switch LO
(Front wiper switch MIST)
1.2 V
Insert mechanical key into ignition key cylin-
Battery voltage
37 der
Ground Key switch Input
(R/W) Remove mechanical key from ignition key
0V
cylinder
7.0 - 8.0 V D
ON (When back door
0V
opened)
Rear wiper stop position 12 V
E
44 Rear wiper stop po- Ignition switch
Ground Input Any position other than
(LG) sition ON 0V
rear wiper stop position
F
G
45 Door lock and unlock Door lock and NEUTRAL position
Ground Input
(GR) switch LOCK unlock switch
H
JPMIA0012GB
1.0 - 1.5 V
LOCK position 0V
I
J
46 Door lock and unlock Door lock and NEUTRAL position
Ground Input
(BR) switch UNLOCK unlock switch
K
JPMIA0012GB
1.0 - 1.5 V
UNLOCK position 0V
L
M
OFF (When driver door
47 Driver door closed)
Ground Driver door switch Input
(BR/Y) switch
WCS
PKIB4960J
7.0 - 8.0 V
ON (When driver door
0V O
opened)
7.0 - 8.0 V
ON (When rear LH door
0V
opened)
Back door is closed (Back
12 V
Luggage room door lamp turns OFF)
49
Ground Luggage room lamp Output lamp switch Back door is opened
(Y)
DOOR position (Back door lamp turns 0V
ON)
50*1 OFF 12 V
Ground A/C indicator Output A/C indicator
(SB) ON 0V
60 Ignition switch
Ground Turn signal LH Output
(W/B) ON Turn signal switch LH
PKIC6370E
6.0 V
Turn signal switch OFF 0V
61 Ignition switch
Ground Turn signal RH Output
(W/L) ON Turn signal switch RH
PKIC6370E
6.0 V
WCS
JCMWM4073GB
WCS
JCMWM4074GB
JCMWM4075GB
WCS
JCMWM4076GB
P
WITHOUT INTELLIGENT KEY : Fail-safe INFOID:0000000005175560
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority
chart.
Priority DTC
• U1000: CAN COMM
1
• U1010: CONTROL UNIT (CAN)
• B2190: NATS ANTENNA AMP
• B2191: DIFFERENCE OF KEY
• B2192: ID DISCORD BCM-ECM
2
• B2193: CHAIN OF BCM-ECM
• B2195: ANTI SCANNING
• B2196: DONGLE NG
I
NOTE:
Details of time display
• CRNT: Displays when there is a malfunction now or after returning to the normal condition until turning igni- J
tion switch OFF → ON again.
• 1 - 39: Displayed if any previous malfunction is present when current condition is normal. It increases like 1
→ 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. The counter
remains at 39 even if the number of cycles exceeds it. It is counted from 1 again when turning ignition switch K
OFF → ON after returning to the normal condition if the malfunction is detected again.
Tire pressure L
CONSULT display Fail-safe monitor warn- Reference
ing lamp ON
U1000: CAN COMM — — BCS-116
M
U1010: CONTROL UNIT (CAN) — — BCS-117
B2190: NATS ANTENNA AMP × — SEC-217
B2191: DIFFERENCE OF KEY × — SEC-220 WCS
B2192: ID DISCORD BCM-ECM × — SEC-221
B2193: CHAIN OF BCM-ECM × — SEC-223
O
B2195: ANTI SCANNING × — SEC-224
B2196: DONGLE NG × — SEC-225
C1704: LOW PRESSURE FL — × P
C1705: LOW PRESSURE FR — ×
WT-16
C1706: LOW PRESSURE RR — ×
C1707: LOW PRESSURE RL — ×
• The parking brake warning buzzer sounds continuously during vehicle travel though the parking brake is C
released.
• The parking brake warning buzzer does not sound at all even though driving the vehicle with the parking
brake applied.
D
Diagnosis Procedure INFOID:0000000004938148
Perform check for the parking brake switch signal circuit. Refer to BRC-67, "Diagnosis Procedure".
Is the inspection result normal? I
YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK PARKING BRAKE SWITCH J
Perform a unit check for the parking brake switch. Refer to BRC-67, "Component Inspection".
Is the inspection result normal?
K
YES >> Replace combination meter. Refer to MWI-97, "Removal and Installation"
NO >> Replace parking brake switch. Refer to PB-4, "Exploded View".
WCS
Light reminder warning chime does not sound even though headlamp is illuminated.
Diagnosis Procedure INFOID:0000000004938150
Check if buzzer switches to proper condition (On/Off) on data monitor of combination meter. Refer to MWI-30,
"CONSULT-III Function (METER/M&A)".
J
Buzzer active condition : On
Buzzer non-active condition : Off
K
Is the inspection result normal?
YES >> Replace combination meter. Refer to MWI-97, "Removal and Installation".
NO >> Replace BCM. Refer to BCS-82, "Removal and Installation" (with Intelligent Key system) or BCS-
L
148, "Removal and Installation" (without Intelligent Key system).
4.CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE) CIRCUIT
Perform the check for the seat belt buckle switch (driver side) circuit. Refer to WCS-27, M
"Diagnosis Procedure".
Is the inspection result normal?
YES >> GO TO 5. WCS
NO >> Repair harness or connector.
5.CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)
O
Perform a unit check for the seat belt buckle switch (driver side). Refer to WCS-28, "Component Inspection".
Is the inspection result normal?
YES >> Replace combination meter. Refer to MWI-97, "Removal and Installation". P
NO >> Replace seat belt buckle (driver side). Refer to SB-8, "SEAT BELT BUCKLE : Removal and Instal-
lation".
The key warning chime does not sound, when all of the following conditions are fulfilled.
• Key inserted into the key cylinder (key switch signal ON).
• Ignition switch is in ACC or OFF (ignition switch signal OFF).
• Driver side door is open (driver side door switch ON)
Diagnosis Procedure INFOID:0000000004938152
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along C
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. D
Information necessary to service the system safely is included in the “SRS AIR BAG” and “SEAT BELT” of this
Service Manual.
WARNING: E
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
F
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the “SRS AIR BAG”.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this G
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS H
WARNING:
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) I
with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly
causing serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the J
battery, and wait at least 3 minutes before performing any service.
WCS