Академический Документы
Профессиональный Документы
Культура Документы
2
Features and benefits
2 Two variants (EN 4–6,
EN 7), to suit all
applications.
2 One version for both door
directions (left-handed/
right-handed) and
mounting positions (hinge
(pull) side/opposite hinge
(push) side.
2 Quick and easy mounting
thanks to two auxiliary
screws and plug-
connected cabling.
2 Reliable function even
in the case of heavy-use
doors and entrances
exposed to various weather
conditions.
2 Optimum adaptability to
individual requirements
– e.g. in hospitals, homes
for the elderly, facilities
for the disabled, restau-
rants, security areas and
laboratories.
2 Numerous control options.
2 Integrated door coordinator
for double-leaf doors.
2 Suitable for connection.
of tested infrared safety
sensors.
3
DORMA ED 200 Technical data
and features
Applications Applications ED 200 mounted on hinge (pull) side with slide channel
Single- and double-leaf standard doors Lintel depth (mm)
280
Single- and double-leaf fire and smoke doors
(only with standard arm) 275
4
Adjustable parameters of the driving phase Function programs
Opening angle, max. Control Control
with standard arm 115° board A board B
with slide channel Off x x
(mounting on the hinge [pull] side) 90° Automatic x x
with slide channel (mounting on the Permanent open x x
opposite hinge [push] side) 90° Exit only – x
with parallel arm 90° Nurse-bed-function for double-leaf
Adjustable opening time ≥ 1,5 s doors (only in combination
Adjustable closing time ≥3s with special module SM 206) x x
Adjustable hold open time 0 s – 30 s Special functions
Adjustable backcheck x Airlock function (only in combi-
Adjustable delayed action x nation with door reed contact TK) X X
Adjustable wall blanking for safety sensors x Timed airlock function (only in
combination with special module
SM 208 and door reed contact TK) X X
Functions and adjustment possibilities
Night-/bank function – x
7 Push&Go function (only in com-
75ϒ bination with Push&Go module) X X
115ϒ
Flip-flop-function (only in combina-
2 tion with special module SM 202) X X
3
6
Door closer function under cut-out
conditions x x
1 25ϒ
5
Prepared for connection of the following accessories
4 Standard arm, slide channel,
parallel arm x x
DORMA IRS-2 infrared safety sensors
(mounting on the hinge [pull] and
opposite hinge [push] side) x x
1 Adjustable opening speed
Door locking device x x
2 Adjustable backcheck
Electric strikes
1 + 2 Adjustable opening time
(fail-safe/fail-secure principle) x x
3 Adjustable closing speed
4 Adjustable delayed action DORMA SVP emergency exit
3 + 4 Adjustable closing time motor lock with self-locking action – x
5 Easy manual operation with bypass valve Access control system
6 Backcheck range for manual operation (DORMA AutoSwitch) – x
7 Adjustable opening angle, adjustable hold Activators (Pushbutton,
open time Radar movement detector ...) x x
Radio remote control x x
External program switch
(integrated 3-position
program switch as standard) x x
Smoke detectors also with i
ntegrated power pack* – x
* 1 x lintel-mounted RM-ED or RM when bottom edge of
lintel to bottom edge of smoke-sealed ceiling < 1 m
In addition: 2 x ceiling-mounted RM when bottom edge
of lintel to bottom edge of smoke-sealed
ceiling > 1 m
x standard X optional
5
DORMA ED 200 for single-leaf doors
106
112
36
1)
38
5,5
45
24,5
X
280
15 315 50
106
36
123
23
47
30
1)
40
12
17
15
175 598
280
123
36
47
1)
30
40
12
17
250 598
615
20 350
106
36
14,5
159,5
48,5
53,5
1)
29
48
60
50 X
90
A
20 350
6
Mounting plates/axle extension
649
629
575
319,5
74
46,5
20
Lintel depth X Standard arm
– 40 to 120 mm var. 01
100
84,5
80 to 240 mm var. 02
66
34
h1 = 21
240 to 360 mm var. 03
21
(Standard)
360 to 500 mm var. 04*
8
8,5
h1 – 12,5
13 Axle extension/spindle extension
1) optional
axle extension 7
(see page 18)
* maximum axle extension : 48 mm,
maximum closing force: EN 6 280
maximum door leaf weight: 120 kg
13 21 30 48 73 95
649
629
575
319,5
74
46,5
20
100
84,5
66
34
h1 = 30
21
(Standard)
8
15
h1 – 15
649
629
602,5
575
329,5
20 74
Lintel depth:
100
84,5
66
– 20 mm to 280 mm
34
h1 = 13
21
649
Min. distance 629
X up to 40 mm = 200 mm 602,5
X up to 100 mm = 260 mm 575
Min.
X up to 160 mm = 290 mm 329,5
20 74
100
84,5
°
66
90
34
21
– 40 to 0 mm 50 var. 01 (Standard)
0 to 40 mm 50 var. 02
h1 +43,5
7
DORMA ED 200 for double-leaf doors
36
36
38
5,5
280
15 315 50
Passive leaf
503,5 64
57,5 64
36
47
30
12
17
586
600
20 280
Passive leaf
503,5 64
57,5 64
36
47
30
12
17
250 586
600
20 350
Active leaf
503,5 64
57,5 64
36
53,5
29
48
50
90 Active leaf
A
20 350
8
133
Lintel depth X Standard
arm
112
–40 to 120 mm var. 01
36 80 to 240 mm var. 02
1) 240 to 360 mm var. 03
45
360 to 500 mm var. 04*
X 1) optional axle extension
133
Lintel depth:
0 mm
123
B = min. 1600 mm
Active leaf
133
Lintel depth:
–20 mm to 280 mm
123
page 4)
1) optional axle extension
Passive leaf
133
82 Lintel depth X A* Parallel
arm
– 40 to 0 mm 50 var. 01
106
159,5
14,5
0 to 40 mm 50 var. 02
40 to 100 mm 80 var. 03
48,5
on the left
X
Passive leaf
9
DORMA ED 200 for “contraflow traffic”
503,5 64
57,5 64
118
36
64
47
12
62
17
250 598
615
20 350
The decisive advantage of passage through the doors department stores, leisure such as opening, closing
the double-door “contraflow takes place immediately facilities and administration and hold open times, and
traffic” lies in the fact that because they always open in buildings, but also for the also the functions triggered
each door leaf controls just the walking direction. This kitchen entrances of large by the safety sensors.
one direction, so separating application is therefore restaurants and hotels. The
the ingress and egress flows especially suitable for doors two swing door operators
as users enter or leave in which there is a constant operate individually: The
the building or area. There or occasionally heavy flow of drive unit of each operator
is also the advantage that users like the entrances to controls all the parameters,
10
64 508,5
64 62,5
118
36
41
34
1)
64 1)
12
64
15
50 315
280
Hinge (pull) side: Lintel depth X Standard arm
B Slide channel, pulling –40 to 120 mm var. 01
Lintel depth: 280 to 240 mm var. 02
–20 mm to 280 mm 240 to 360 mm var. 03
(Attention! Please consider
Also available the minimum door leaf 360 to 500 mm var. 04*
1) optional axle extension
with 2 slide channels width according to the (see page 18)
diagram on page 4) * maximum axle extension: 48 mm
1) optional axle extension
maximum closing force: EN
(see page 18) maximum door leaf weight: 120 kg
11
DORMA ED 200 Fire and smoke
doors F
106
36
38
5,5
280
15 315 50
Double-leaf doors
508,5 64
62,5 64
36
36
38
5,5
280
15 315 50
Passive leaf
In the case of fire and smoke 2. Pushbutton (with “Tür The number of smoke detec- (approved) position. For all
doors, the ED 200 is always schließen” wording) tors normally depends on components of this system,
fixed on the opposite hinge 3. Power supply and the distance between the including the electric
(push) side with a standard 4.Hold open system bottom edge of the lintel strikes, approvals must be
arm. Such systems are (3. and 4. complied with and the bottom edge of the obtained in accordance
referred to as hold open by ED 200). smoke-sealed ceiling. Please with the German Institute
systems. Compliant with the The ED 200 has the see page 14 for number and for Civil Engineering (DIBt).
German guidelines governing approval for application positioning of smoke detec-
hold open systems issued by at fire and smoke doors. tors. Depending on require-
the German Institute for Civil Please refer to the chart ments, individual or several
Engineering DIBt (Berlin), on page 5 for all possible electric strikes can be con-
hold open systems must combinations of operators nected which must operate
always consist of the and DORMA smoke detec- in accordance with the fail-
4 following components: tors. The connection of secure principle. In addition,
1. Activator (complied smoke detectors, supplied it must be ensured that they
with by RM-ED or RM) by others, is also possible. are installed in the correct
12
Lintel depths of up to 500 mm
*
maximum axle extension: 48 mm
1) maximum closing force: EN 6
maximum door leaf weight: 120 kg
Fire and smoke doors with
1) optional axle extension
X
lintel depths of up to 500
(see page 18)
mm may also be equipped
with the ED 200 swing door
operator, as it is also appro-
ved by the German Institute
for Civil Engineering DIBt
with standard arm variant 04.
F Approval Certification
The DORMA ED 200 auto
matic swing door operator is
approved in Germany by the
MPA (State Material Testing
36
13
DORMA ED 200 Smoke detectors for fire
and smoke doors
≤1m
≤1m
230 V
230 V
max. 0,1 m
≤ 3m
NO
Does the
door width
exceed 2 Ceiling-mounted detectors1) 2 Ceiling-mounted detectors1)
3,0 m?
0,6 – 2,4
m
0,6 – 2,4
m
≤1m
≤1m
NO YES
230 V 230 V
>3m >3m
4m
230 V
230 V
>1m
YES
max. 0,1 m
For application at fire and smoke doors: RM-ED smoke detector RM smoke detector
14
DORMA RM-ED lintel-mounted smoke detector
DORMA RM-ED
378 30
Red/green light indicator,
test input for functional
34
test, power supply: 24 V DC,
45
power consumption: 75 mA,
B
maximum load current:
357,5
max. 2 A at 60 V AC.
Bolzen
12/25
E 6/C 0 (silver-coloured)
Order No. 64840001
RAL 9016 (white)
The optical DORMA RM- Dimensions: Order No. 64840011
ED smoke detector can be 34 x 378 x 30 mm Special colour
installed as ED 200 lintel- Order No. 64840009
mounted smoke detector.
DORMA RM lintel- and ceiling mounted smoke detector DORMA RM-N ceiling-mounted smoke detector
195 52
RM-N
The DORMA RM-N serial
∅ 100
smoke detector detects
53
170
smouldering fires as well
45
flush-mounting
80 Order No. 19144601175
15
Door coordinator
DORMA ED 200 for double-leaf fire and
smoke doors
1 2 3 2 1
1. Standard cover
2. Cover for cutting edge
3. VARIO cover
16
DORMA ED 200 Partially automated
double-leaf doors
15 280
280 15
142 160
143 428
280
81
30
70
70 133
ITS 96 GSR/GSR-EMF ITS GSR/Pivot block
90 68 141
106
48,5 69
31 280
30
96,5
40
Passive leaf Active leaf
17
DORMA ED 200 Arm versions
and accessories
Arm versions
133 133
82
133
106
14,5
48,5
X
X
DORMA offers a competi- on the opposite hinge side side (pull side) and on the (pull side) and when small
tive range of arms and axle (push side). opposite hinge side (push door leaves have to be auto-
extensions in order to cope The joint can be opened side). Apart from its appea- mated. Furthermore lintel
with all door versions and easily what facilitates the ling design, it offers the depths of up to 160 mm
ways of mounting. Apart installation considerably. benefit that it can also pull can be handled.
from a standard arm, also a The standard arm pushes the door. However, due to All these arm versions are
slide channel and a parallel the door in opening direc- its force progression, the supplied with an axle
arm are available. tion and offers the ED 200 slide channel is not suitable extension. When required,
The standard arm is espe operator enough power for application at fire and additional axle extensions
cially suitable to transfer for installation at fire and smoke doors. are available as an option
the maximum force onto smoke doors. The parallel arm is adequate in order to compensate
the door leaf and is applied The slide channel is suitable where the operator is differentials in height.
where the system is mounted for installation on the hinge installed on the hinge side
Optional axle extension for variable height increase of ED 200 swing door operators
70,5 19425202150
48* 88,5 19425203150
Y
18
DORMA ED 200 Wiring diagrams
socket
04 Mechanical PGS external
4 x 0,25 mm
4 x 0,25 mm
4 x 0,8 mm
2 x 0,8 mm
2 x 0,8 mm
8 x 0,8 mm
4 x 0,8 mm
2 x 0,8 mm
program switch
3
05 Electronic PGS external 19
program switch 9 2a
2b 7 8 10 11 5 4 12
06 Pushbutton
10 A
07 Pushbutton, inside
1
08 Pushbutton, outside L1 N
PE
4 x 0,25 mm
18 RM smoke detector,
4 x 0,8 mm
2 x 0,8 mm
2 x 0,8 mm
8 x 0,8 mm
4 x 0,8 mm
2 x 0,8 mm
3
hinge (pull) side 9
2a
19 Manual release switch,
19
with “Tür schließen” 2b 7 8 10 11 5 4 12 10 A
wording
1
L1 N
PE
je 2 x 0,8
15
3 x 1,5 mm
ED 200
4 x 0,25 mm
4 x 0,25 mm
2 x 0,8 mm
8 x 0,8 mm
4 x 0,8 mm
2 x 0,8 mm
2 x 0,8 mm
2 x 0,8 mm
8 x 0,8 mm
4 x 0,8 mm
2 x 0,8 mm
3
12 4 5 10 6 2b 6 10 5 4 12
2a
10 A
1
L1 N
PE
19
DORMA ED 200 Example combinations
Suitably equipped for the requirements of handicapped people: The rest room for handicapped people
2 x 0,8 mm
2 x 0,8 mm
2 x 0,8 mm
2 x 0,8 mm
4 x 0,8 mm
6 x 0,8 mm
lamp (red) ED 200
3 x 1,5 mm
disabled symbol
18 Concealed/flush-mounted 2
6 9
emergency pushbutton,
located behind emergency 3
Auf
break glass 10 A
5 Verriegelt
7 8
19 Concealed/flush-mounted
10 11
signal lamp (red)
L1 N PE inside outside
10 Concealed/flush-mounted 1
palm switch, with “open/
locked” wording
11 Flush-mounted pull switch,
for emergency opening
12 Auxiliary drive unit, housed
in external cover
20
Application of the ED 200 swing door operator in smoke and heat ventilation systems
Smoke and heat ventilation 2 They can also be used for control unit and an air supply The following system
systems are applied in ventilation purposes (air opening. solutions are approved as air
preventing fire protection supply/air withdrawal). In smoke and heat ventilati- supply openings:
with the following 2 To open air outlets like on systems, the ED 200 is 1. ED 200 with USV
objectives: windows and dome lights mounted to doors serving as emergency power supply
2 To evacuate smoke and in the event of a fire. air supply openings. These unit
heat in the event of a fire. 2 Automatic and remote doors are designed to create 2. ED 200 Inverse
2 To keep emergency exits activation. a balance between the air (see page 22 for “Mechanical
and escape routes free 2 To supply and to withdraw inflow and the outflow of opening under cut-out
from smoke and gas. air. gas in the roof area of the conditions”)
2 To create a smoke-free A smoke and heat ventilation building (e. g. windows).
layer and to facilitate fire system consists of a smoke
fighting. outlet, fire detectors, a
21
DORMA ED 200 Example combinations
TV 200 electrical locking device TL-TMS door terminal SM 202 special module
22
Emergency exit control system
Insurance lock
When closed, the door is SVP-S22 motor lock control
locked by the DORMA module is installed under SVP-S22-DCW ®
SVP 2000 emergency exit the extended cover of the SM24
NYM 3 x 1,5 mm2
motor lock with self-locking ED 200 for activation control ED 200 Feeder
action (insurance lock). of the DORMA SVP 2000. 230 V ~
The door can be opened and
closed from the inside at any The following components 2 x 0,8
time, with unlocking action are required:
of the DORMA SVP 2000 2 ED 200 swing door
KÜ SVP 2000
and the delayed activation operator
of the DORMA ED 200 being 2 SVP 2000 emergency ST
SVP-A
initiated either manually exit motor lock with self-
or by active detectors as locking action
required. Activation control 2 SVP-S22 DCW motor lock
from a central position is control module
also possible. Authorized 2 SM 24 special module for
users may be granted access stabilized power supply
from the outside. Once the 2 SVP-A … motor lock cable
door is closed, the insurance 2 Concealed/flush-mounted
lock is reinstated fully cable loop KÜ
automatically as the DORMA 2 Activator
SVP 2000 automatically
throws the bolt after each
closing cycle. The DORMA
23
DORMA ED 200 DORMA IRS-2 infrared
safety sensor
Rever
sing
The DORMA IRS-2 safe- this side of the door, the are detected at the same recommends to select the
ty sensor is a monitoring door is reopened automati- time. The scanning range longest-possible IRS-2 safe-
module designed to safe cally due to a new activating of the IRS-2 is adjustable ty sensor variant with
guard the sweep range impulse given by the safety and infrared light is used to a maximum number of
of automatic swing doors. sensor. In case that the safety safeguard the driving phase integrated infrared sensors
It can be mounted travel- sensor on the hinge (pull) of the door. As an active as the scanning range grows
ling on the hinge (pull) and side is activated, the auto- infrared sensor, the IRS-2 in line with the number
opposite hinge (push) side of matic opening action of the detects all static and moving of infrared sensors. This
the door. If mounted on the door is stopped in order to objects, e. g. items or ensures the maximum safety
opposite hinge (push) side, avoid collisions with objects people, within its scanning of the swing door.
the DORMA IRS-2 safety in the scanning range of range. The IRS-2 is available
sensor acts as an activator the IRS-2 safety sensor. in different lengths and
to open the door in the close The technical principle of with a variable number of
range of the door. As soon the safety sensor ensures infrared sensors. Depending
as an object is located on that people and objects on the door width, DORMA
1m
42
30°
(pull) and opposite hinge 2 Monitoring of crushing-
mm
24
IRS-2 mounting dimensions
85
85
91
44
38
38 38
23,5
30 30 4,2
The ED 200 is also available insufficient space for radar Application and benefits
with the electronic control or pushbutton activation.
2 In contrast to radar or 2 It minimizes the inhibition
unit Push&Go, which can Where fire doors are retro-
infrared-operated door thresholds of older people
easily be retrofitted as an fitted with Push&Go, the
systems, the ED 200 2 Activation from any
accessory. Just push slightly fail-safe lock need not be
Push&Go prevents heavy- opening angle
and the door leaf opens exchanged. An additional
used doors from being 2 The ED 200 (with control
automatically, thus even incremental encoder ensures
opened unnecessarily board A and B) can easily
heavy doors can be operated that the Push&Go system
2 Ideal solution for locations be retrofitted with Push&Go
without any effort. Inhibitions can be activated from any
with insufficient space 2 Adjustable sensitivity
not least older people might opening angle. Furthermore,
for radar or pushbutton (15 levels)
have when it comes to the sensitivity of the system
activation 2 Safety function: the
modern technology are being is adjustable in 15 levels.
2 Even heavy doors can be opening action is reversed
removed. If the door hits an obstacle
opened manually with the as soon as the door hits an
In contrast to radar or during its closing action, it
support of Push&Go obstacle
infrared-controlled door will be reopened immedia
systems, the comfort version tely. As no additional wiring
ensures that heavy-used is required, Push&Go is
doors and entrances are the economical alternative to
not opened unnecessarily. a radar-controlled system.
Push&Go is the appropriate
alternative for locations with
115ϒ
15 x 0,7ϒ = 10,5ϒ
25
DORMA ED 200 System accessories
Program switch
When combining the system with a program switch out of the 2U p to 4 different functions: Off, Automatic, Exit Only,
DORMA accessory range, the automatic door system even Permanent Open
meets individual requirements and offers easy handling. 2 Electronic program switches in System 55 design to cope
These program switches are available in various designs with the highest aesthetic demands
have been conceived for all kinds of demands.
Furthermore they offer various options, from a mechanical to
a full-electronic version alternatively also lockable via Euro
profile half-cylinder or in a full-electronic way via code.
PG-D1
PG-D1 program switch
4-position, aluminium,
white, for control unit A
UP = 7,5
AP = 47,5
31
and B, flush-mounted,
30
80 x 80 mm, Gira S-Color
46
PG-D3
PG-D3 program switch
4-position, lockable,
AP = 47,5
UP = 7,5
36
30
26
PG-D4
PG-D4 program switch
4-position, lockable via
65
Euro profile half-cylinder,
white, flush-mounting,
105 x 80 x 65 mm,
box for surface-mounting:
105
97
19142201170
PG-D4
box for surface mounting
Thread M3
for PG-D4
for mechanical program
switch, 100 x 80 x 65 mm
standard frame, white
83,5
100
19
PUSH OUT
Order No. 19142201170
15
15
EPS-D
EPS-D full-electronic
program switch
13 10 in System 55 design,
4-position, lockable via code
or additional TL-ST S55 key
1 3
switch, membrane keypad,
aluminium coloured, white,
80
R 30
flush-mounted, 80 x 80 mm
2 4
27
DORMA ED 200 System accessories
Pushbuttons
Pushbutton
12,5
Pushbutton
Single-pole changeover con-
tact, standard frame, white,
flush-mounting, System 55
80
Order No. 19144701170
80
Key switch
Key switch KT 3-1
1 NO contact, with Euro
75 45
profile17half-cylinder
9 (can be
replaced by any half-cylinder
of a master-key system), you
19
75
l 59
9
50
60 PG 13,5
metal, 75 x 75 x 60 mm
Flush-mounting version Surface-mounting version
KT 3-1 KT 3-1 flush-mounting
Flush-/Surface Order No. 05054531332
75 45
mounting 17 9 KT 3-1 surface mounting
Order No. 05054631332
19
75
Key switch KT 8
l 59
10
10 40 Lettering “Auf, Zu”, 2 NO
contacts, with Euro profile
9
50
PG 13,5
60 half-cylinder can be replaced
Flush-mounting version Surface-mounting version
by any half-cylinder of a
master-key system), you can
only withdraw the key when
it is in zero position,
aluminium,
metal, 75 x 75 x 60 mm
KT 8 flush-mounting
KT 8
Order No. 05054831332
Flush-/Surface
KT 8 surface mounting
mounting
Order No. 05054931332
40
20
40
57
28
Large-sized pushbutton (elbow)
Large-sized pushbutton
40 (elbow)
surface-mounting, extra-flat
design, synthetic material,
grey, 209 x 79 x 17 mm
59,5
209
169
Order No. 05080231332
79 17 4,8
Large-sized pushbuttons
Large-sized pushbutton
with box for flush-mounting,
without switch pad, incl.
switch, 224 x 82 mm
Order No. 05095531332
224
Large-sized pushbutton
with box for surface-mounting,
without switch pad, incl.
2 switches, paint sprayed for
82 44
aluminium effect,
Surface-mounted design 224 x 82 x 44 mm
11 Order No. 05095231332
Switch pad
39,5
aluminium, suitable for
flush-/surface-mounting,
224
71
214 x 70 mm
Order No. 05095431332
Switch pad
82
aluminium, suitable for
Flush-mounted design
flush-/surface-mounting,
214 x 70 mm, with inscrip-
tion reading “Tür auf”
Order No. 05095331332
CT 4/1 code keypad as control for locking devices (keypad and electronic module have to be combined)
The code keypad does not require optional software for MTB 4/1 metal keypad
simple access authorizations. The metal keypad is waterproof to enter the activation code
and protected against manipulation thus it is also suitable (to open the door) and for
for installation on the outside of a building. The four- or programming purposes,
six-digit code can be changed at the keypad via Plug & Play. surface-mounting,
The respective control unit is installed in the protected area 75 x 75 x 11.5 mm
and can be connected to all DORMA operators. Order No. 05079331332
Surface-mounting, 230 V/50 Hz, 1.5 V A, 1 x UM potential-
free relay contact 8 A, 250 V, connections: max. 2.5 mm, EB 4/1
75 x 75 x 11.5 mm. Electronic module, incl. 2
m connection cable, plastic
cover, black, surface-
mounting
Order No. 05063431332
29
DORMA ED 200 System accessoires
DORMA RC-T
Large-sized pushbutton with integrated radio transmitter,
small pushbutton and RC-T radio remote control including
battery (product life: approx. 1 year with 60 activations/day),
without switch pad, 2 channels, 433.92 MHz, with box for
surface-mounting 224 x 82 x 44 mm
Order No. 16562201175
Switch pad, aluminium, suitable for flush-/surface-mounting,
214 x 70 mm
Order No. 05095431332
Switch pad with inscription reading “Tür auf”, aluminium,
suitable for flush-/surface-mounting, 214 x 70 mm
Order No. 05095331332
DORMA RC-T
HandHeld DORMA RC-T HandHeld
Hand-held hand-held transmitter, incl. battery (product life: approx.
DORMA RC-T transmitter 1 year with 60 activations/day), 4 buttons that can be
Large-sized pushbuttons assigned individually, 2 channels, frequency: 433.92 MHz,
plastic, black
Order No. 1656210117
DORMA AutoSwitch
Receiver/control unit, surface-mounting, white
Order No. 16571101175
30
Radar motion detectors
Radar motion detectors detect approaching people at an
early stage and emit an activation (opening) signal for the
door operator. Radar motion detectors only respond to
movements. Thanks to their various adjustment options, also
difficult installations can be realised.
white
Order No. 16503103170
Eagle black Eagle white Eagle silver
silver
120 100 Order No. 16503102170
3 mm
34 Merkur
80
8 mm
Cable entry Cross traffic suppression
50
black
50
175 Order No. 16532201170
60
Merkur
168
150
21 8
57
31
DORMA ED 200 System accessoires
4,2
42
30 30
L 38
32
Power transit device and cable loops
Power transit device type 10305
Power transit device
13 17
5 5
4 Type 10305
5,3
two-pole, to transfer electric current from the door frame to
the door leaf while the door is closed.
58
71
41
5,3
Cable loops
300 KÜ 300 cable loop
Flexible metal loop for protection of cables between door and
door frame, max. cable diameter: 5 mm, Length: 300 mm
Order No. 05045331332
5
KÜ 600 cable loop
Flexible metal loop for protection of cables between door and
door frame, max. cable diameter: 5 mm, Length: 600 mm
30
10
Robust stainless steel spiral with recess box for flexible con-
nection cables, for cables with a diameter of up to
8 mm. Ensuring a pinch-free and sabotage-proof connection
between the leaf and frame of doors and windows.
33
DORMA ED 200 System accessoires
KÜ-CD cable loop for door-leaf mounted DORMA swing door operators
Junction box (1)
for cable loop (internal
3 diameter: 12 mm or
4 200 mm), white, including
accessories (2)
The DORMA KÜ-CD cable loop offers the ideal solution for Adaptor unit (5)
the door leaf fixing to conceal the cabling on its
options of the CD operator. way into the operator,
The combination of combinable with both cable
loops
– Junction box (1)
– Junction box accessories (2) silver
– Cable loop (inner diameter 12 mm) (3) Order No. 5163133332
– Cable loop (inner diameter 20 mm) (4)
RAL 9016 (traffic white)
– Adapter-unit (5)
Order No. 5163233332
enables elegant concealment of all the requisite cabling
connecting the operator to the supply.
34
Further accessories
Red-green display
The red-green display indicated the status of the door sys-
tem. The extravagant, semicircular designer signal lamp is
made of acryl, manufactured according to the latest LED
technology and has a high-grade LED display (24 V, brilliancy
according to DIN VDE (German association of engineers)
0834, part 1). The light signals are visible from both sides
and the front even from a large distance. Its display is
resistant against almost all disinfectants and cleaning agents.
Light signal, 24 V DC, LED-display red, green, white.
35
www.dorma.com
Region China
China
DORMA Door Controls (Suzhou)
Co. Ltd.
Phone +86 512 676 12481 Lithuania
www.dorma.com.sg DORMA Norge AS
Phone +47 23 176800
DORMA GmbH + Co. KG Hong Kong www.dorma.com
DORMA Platz 1 DORMA Door Controls Pte. Ltd.
D-58256 Ennepetal Phone +852 25034632 Norway
Phone +49 2333/793-0 www.dorma.com.sg DORMA Norge A/S
Fax +49 2333/793-495 Phone +47 23 176800
Region Far East www.dorma.no
Division Automatic worldwide
Indonesia, Japan, Malaysia, Sweden
Region Australasia Vietnam DORMA Sverige AB
DORMA Emerald Entrance Phone +46 31 289520
Australia Systems Pte Ltd www.dorma.se
DORMA Automatics Pty. Ltd. Phone +65 459 5733
Phone +61 3 97964111 www.dorma.com.sg Region South America
www.dorma.com.au
Philippines Argentina
New Zealand DORMA Door Controls Pte. Ltd. DORMA Sistemas de
DORMA Automatics Pty. Ltd. Phone +632 893 40778 Controles para Portas Ltda
Phone +61 3 97964111 www.dorma.com.sg Phone +54 11 45051032
www.dorma.com.au www.dorma.com
Singapore
Region Central Europe DORMA Far East Pte. Ltd. Brazil
No. 31 Gul Lane DORMA Sistemas de Controles
Belgium Phone +65 62 68 76 33 Phone +55 11 41913244
DORMA foquin N.V./S.A. www.dorma.com.sg www.dorma.com.br
Phone +32 50 312849
www.dorma.be South Korea Region South-East Europe
DORMA Emerald Entrance
Germany Systems Pte Ltd Austria
DORMA Automatic Phone +65 459 5733 DORMA AKS
GmbH + Co. KG www.dorma.com.sg Automatic GmbH
Phone +49 2333 793-0 Phone +43 6225 8636-0
www.dorma.de Taiwan www.dorma.at
DORMA Door Controls Pte. Ltd.
Luxembourg Phone +886 2 9182987 Croatia
Luxembourg Subsidiary www.dorma.com.sg DORMA URED
Automatic Phone +385 1 3498 422
Phone +49 2333 793-216 Region France www.dorma.com
www.dorma.de
France Czech Republik
Netherlands DORMA Accueil S. A. S. DORMA dverní technika CR,
DORMA van Duin Nederland BV Phone +33 4 79348924 s.r.o.
Phone +31 488 418 100 www.dorma.fr Phone +420 2 671321-78 or -79
Door Control www.dorma.nl www.dorma.com
Region Gulf
Switzerland Hungary
DORMA Schweiz AG Saudi Arabia, Bahrain, Kuwait, DORMA AKS Automatic GmbH
Phone +41 71 8864646 Egypt, Syria, Jordan, Lebanon, Phone +36 1 2065127
www.dorma.ch Iran or 2058058
DORMA ARABIA www.dorma.com
Region Emerging Markets Automatic Doors Ltd.
Kingdom of Saudi Arabia Romania
Bulgaria Phone +966 3 847 2394 DORMA ROMANIA S.R.L.
DORMA Bulgaria www.dorma.com Phone +40 31 806 916 0
Phone +359 2 9714 904 www.dorma.com
www.dorma.com United Arab Emirates, Oman,
Automatic Qatar Slovakia
Greece DORMA Middle East LLC DORMA Slovensko spol. s.r.o.
DORMA Representation Greece Dubai Phone +421 2 50221 283
Phone: +30 21 09944388 Phone +971 4 282 4424 www.dorma.com
www.dorma.com www.dorma.com
Slovenia
India Region North America DORMA Representation
DORMA Door Controls India Slovenia
WN 051 578 51532, 06/09, GB, xx. DD. xx/09 · Subject to change without notice