Академический Документы
Профессиональный Документы
Культура Документы
This spreadsheet can be used for the evaluation of the punching shear stress for Flat slab.The inputs are the slab/drop panel
Load and the Biaxial moments. The load acting on the slab area is also needed to find the Net P acting on the critical section
need to be provided at 0.5d away from the pedestal and Min. spacing should not exceed 0.75d. Successive checks are to be
or where section changes. Provide strps for a distance of 'd' from where shear stress is within allowable limits.
BS R1
Along X Along Y
650 650
0 0
650 650
75 75
30
500
0 -
1957 -
3.79E+02 -
1.16E+01 -
575 575
575 -
650 650
4900 -
0.400 0.400
0.823 -
0.823 -
1.369 -
NO SHEAR REINF. REQD.
0 -
150 -
0.00 -
Flat slab.The inputs are the slab/drop panel sizes and the
o find the Net P acting on the critical section. Shear legs
t exceed 0.75d. Successive checks are to be done at 0.75d
ress is within allowable limits.
PUNCHING SHEAR CHECK FOR
INPUT VALUES
Column Along X Along Y
I.S.CODE METHOD
SHEAR STRESS DUE TO P 0.6946
STRESS DUE TO Mx 0.1249
STRESS DUE TO My 0.0038
TOTAL PUNCHING STRESS TauV 0.8233
PUNCHING SHEAR CHECK FOR FLAT SLABS
CSI METHOD
ITEM SIDE 1 SIDE 2 SIDE 3 SIDE 4 SUM
CORNER X4 Y4 F1 F2 F3
A -612.5 612.5 0.6946 0.1249 -0.0038
B 612.5 612.5 0.6946 0.1249 0.0038
C 612.5 -612.5 0.6946 -0.1249 0.0038
D -612.5 -612.5 0.6946 -0.1249 -0.0038
Remarks
centroid of c/s
Tau V
0.8157
0.8233
0.5735
0.5659