Академический Документы
Профессиональный Документы
Культура Документы
of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
Equipment: Transmitter Model 3051, Type 3051C, 3051T, 3051L, 3051CFA, 3051CFC and 3051CFP
Optional accessory:
Type of Protection: Ex db
Marking:
Ex db IIC T6...T4 Ga/Gb
Signature:
(for printed version)
Date:
STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards:
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the
Test Report:
NL/KEM/ExTR09.0038/03 NL/KEM/ExTR09.0038/04
Schedule
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
Transmitter Model 3051, Type 3051C, 3051T, 3051L, 3051CFA, 3051CFC and 3051CFP, are microprocessor based transmitters,
used to convert the measured process pressure into digital or analog signals, available in single housing version.
For details on the nomenclature, thermal data and electrical data see Annex 1 to this certificate.
The device contains a thin wall diaphragm less than 1 mm thick that forms a boundary between EPL Ga (process connection) and EPL
Gb (all other parts of the equipment). The model code and datasheet are to be consulted for details of the diaphragm material. During
installation, maintenance and use the environmental conditions to which the diaphragm shall be subjected shall be taken into account.
The manufacturer's instructions for installation and maintenance shall be followed in detail to assure safety during its expected lifetime.
Non-standard paint options may cause risk from electrostatic discharge. Avoid installations that could cause electrostatic build-up on
painted surfaces, and only clean the painted surfaces with a damp cloth. If paint is ordered through a special option code, contact the
manufacturer for more information.
IECEx Certificate
of Conformity
Certificate No: IECEx KEM 09.0034X Issue No: 4
Annex:
381998900-Annex 1.pdf
381998900-Annex 2.pdf
Annex 1 to IECEx Report NL/KEM/ExTR09.0038/04
Annex 1 to Certificate of Conformity IECEx KEM 09.0034X, issue 4
Annex 1 to EU-Type Examination Certificate KEMA 00ATEX2013 X, issue 8
Description
Transmitter Model 3051, Type 3051C, 3051L, 3051T, 3051CFA, 3051CFC and 3051CFP, are
microprocessor based transmitters, used to convert the measured process pressure into digital or analog
signals.
Type designation
3051 C …
I II variants
Variants
Page 1 of 2
Form 124
Version 2 (2013-07)
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands
T +31 88 9683000 F +31 88 9683100 www.dekra-certification.com Registered Arnhem 09085396
Annex 1 to IECEx Report NL/KEM/ExTR09.0038/04
Annex 1 to Certificate of Conformity IECEx KEM 09.0034X, issue 4
Annex 1 to EU-Type Examination Certificate KEMA 00ATEX2013 X, issue 8
Variants (continued)
Thermal data
The relation between process connection temperature, ambient temperature and temperature class is as
follows:
Electrical data
Page 2 of 2
Annex 2 to Certificate of Conformity IECEx KEM 09.0034X, issue 4
Description
Transmitter Model 3051, Type 3051C, 3051L, 3051T, 3051CFA, 3051CFC and 3051CFP, are
microprocessor based transmitters, used to convert the measured process pressure into digital or analog
signals.
Manufacturer locations:
Page 1 of 1
Form 124
Version 2 (2013-07)
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands
T +31 88 9683000 F +31 88 9683100 www.dekra-certification.com Registered Arnhem 09085396