Академический Документы
Профессиональный Документы
Культура Документы
6. Shell: (a) Number of course(s) __________1___________ (b) Overall length _________1,0 mm _________
Course(s) Material Thickness Long. Joint (Cat. A) Circum. Joint (Cat. A, B, & C) Heat Treatment
Full, Spot, Full, Spot,
No. Diameter Length Spec./Grade or Type Nom. Corr. Type Eff. Type Eff. Temp. Time
None None
1 590 mm ID 1,00 mm SA-516 70 10 mm 2.5 mm 1 Full 100% 1 Full 100% None None
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
7. Heads: (a) _____________SA-105 (H.T - N/A)______________ (b) ___________SA-234 WPB (H.T - N/A)____________
l(Material spec. number, grade or type) (H.T. - time and temp.) l(Material spec. number, grade or type) (H.T. - time and temp.)
Location (Top, Bottom, Thickness Radius Elliptical Conical Flat Side to Pressure Category A
Ends) Ratio Apex Angle Hemis. Radius
Min. Corr. Crown Knuckle Diameter Convex Concave Type Full, Spot, None Eff.
(a) Left End 45.97 mm 2.5 mm N/A N/A N/A N/A N/A 812.8 mm N/A Yes S None 100%
(b) Right End 12.7 mm 2.5 mm N/A N/A 2:1 N/A N/A N/A N/A Yes S None 100%
(07/17)