Академический Документы
Профессиональный Документы
Культура Документы
CIF: Callao
Suitable Materials:
Wood, Plastic, Aluminum, Di-Bond, Engraving Board, Fomex. Engineering plastics, marble, acry
lic, Perspex, PVC, Composite panel, Copper, Alloys, MDF, etc.
PARAMETERS
NO. Description Parameter
1 X-Y-Z Working Area 1200x1200x200mm
2 Table Size 1340X1540mm
3 X-Y-Z Traveling Positioning Accuracy ± 0.05/300mm
X-Y-Z repositioning Positioning
4 ± 0.04mm
Accuracy
5 Table Size T-slot and vacuum table
6 Frame Cast Steel
7 X, Z Structure Ball Screw
8 Y Structure Ball Screw and Rail Shaft Linear Bearings
Max. Power Consumption(Without
9 1.2KW
spindle)
10 Max. Rapid Travel Rate 10000mm/min
11 Max. Working Speed 6000mm/min
12 Spindle Power Motor 2.2Kw spindle
13 Spindle Speed 0-24000RPM
14 Drive Motors Stepper System
15 Working Voltage AC220V/50/60Hz/380V
16 Command Language G Code
17 Operating System MACH3
18 Interface USB
19 Collect ER20
20 X-Y Resolution <0.01mm
21 Software Compatibility Artcam Software
22 Packing Size 1760x1850x1700mm
23 Net Weight 450KG
24 Gross Weight 580KG
Dust Collection
With the Dust Collection system, all dust residue
is controlled within a small area by employing the
brush of the dust hood on the spindle to get the
residue vacuumed away into the dust bag of the
dust collector.
Rotary Device (optional +450$. )
For engraving and do the 3D model,or other
cylinder material .
Accessories
2.2KW water cooled spindle VFD inverter /Leadshine stepper driver
MACH3 controller Taiwan Hiwn 20 square rail 5.5kw air vacuum pump
guide
Notice
About the delivery.
Its need about 15-25 days to produce the machine after get your deposit.
all thing is tested well,then we arrange the delivery.
About payment:
We accept T/T , you can pay 30% in advance, 70% before delivery.
The machine will be produced after received your deposit.after the machine is ready, we will show
you the machine photos and the testing video.
After you agree, please finish the balance.Finally.we arrange the delivery.