Академический Документы
Профессиональный Документы
Культура Документы
Page: 1/9
PT BASF Indonesia Safety data sheet
Date / Revised: 16.05.2013 Version: 1.0
Product: MBRACE SATURANT PTB
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
Manufacturer/supplier:
PT BASF Indonesia
Plaza GRI, 10th & 11th Floor Jl. H.R. Rasuna Said Blok X-2 No.1
Jakarta Selatan 12950, P.O. Box 2431 Gbr., Jakarta 10024, INDONESIA
Telephone: +62 21 526-2481 / -2505
Telefax number: +62 21 526-2493 / -2515
Emergency information:
International emergency number:
Telephone: +49 180 2273-112
2. Hazard identification
Pictogram:
Page: 2/9
PT BASF Indonesia Safety data sheet
Date / Revised: 16.05.2013 Version: 1.0
Product: MBRACE SATURANT PTB
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
Signal Word:
Danger
Hazard Statement:
Causes severe skin burns and eye damage. Harmful in contact with skin. Harmful if inhaled. Harmful
if swallowed. May cause an allergic skin reaction. Harmful to aquatic life. Harmful to aquatic life with
long lasting effects. May damage the unborn child. Suspected of damaging fertility.
3. Composition/information on ingredients
Chemical nature
4. First-Aid Measures
General advice:
First aid personnel should pay attention to their own safety. Immediately remove contaminated
clothing.
Page: 3/9
PT BASF Indonesia Safety data sheet
Date / Revised: 16.05.2013 Version: 1.0
Product: MBRACE SATURANT PTB
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
If inhaled:
If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical
attention.
On skin contact:
After contact with skin, wash immediately with plenty of water and soap. Under no circumstances
should organic solvent be used. If irritation develops, seek medical attention.
On ingestion:
Rinse mouth immediately and then drink plenty of water, seek medical attention. Do not induce
vomiting unless told to by a poison control center or doctor.
Note to physician:
Symptoms: No data available.
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
5. Fire-Fighting Measures
Specific hazards:
carbon dioxide, carbon monoxide, harmful vapours, nitrogen oxides, fumes/smoke, carbon black
Further information:
The degree of risk is governed by the burning substance and the fire conditions. If exposed to fire,
keep containers cool by spraying with water. Collect contaminated extinguishing water separately, do
not allow to reach sewage or effluent systems. Contaminated extinguishing water must be disposed
of in accordance with official regulations.
Personal precautions:
Do not breathe vapour/aerosol/spray mists. Wear eye/face protection. If exposed to high vapour
concentration, leave area immediately. Use personal protective clothing. Handle in accordance with
good building materials hygiene and safety practice.
Environmental precautions:
Contain contaminated water/firefighting water. Do not discharge into drains/surface
waters/groundwater.
Page: 4/9
PT BASF Indonesia Safety data sheet
Date / Revised: 16.05.2013 Version: 1.0
Product: MBRACE SATURANT PTB
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
Methods for cleaning up or taking up:
For small amounts: Pick up with inert absorbent material (e.g. sand, earth etc.). Dispose of
contaminated material as prescribed.
For large amounts: Pump off product.
Handling
Avoid aerosol formation. Avoid inhalation of mists/vapours. Avoid skin contact. No special measures
necessary provided product is used correctly.
Storage
Suitable materials for containers: tin (tinplate), High density polyethylene (HDPE)
Further information on storage conditions: Keep only in the original container in a cool, dry, well-
ventilated place away from ignition sources, heat or flame. Protect from direct sunlight.
Hand protection:
Suitable chemical resistant safety gloves (EN 374) also with prolonged, direct contact
(Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to
EN 374): E.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), butyl rubber (0.7 mm) and other
Manufacturer's directions for use should be observed because of great diversity of types.
Eye protection:
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Body protection:
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting
boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case
of dust).
Page: 5/9
PT BASF Indonesia Safety data sheet
Date / Revised: 16.05.2013 Version: 1.0
Product: MBRACE SATURANT PTB
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
General safety and hygiene measures:
Do not inhale gases/vapours/aerosols. Avoid contact with the skin, eyes and clothing. Avoid
exposure - obtain special instructions before use. Handle in accordance with good building materials
hygiene and safety practice. When using, do not eat, drink or smoke. Hands and/or face should be
washed before breaks and at the end of the shift. At the end of the shift the skin should be cleaned
and skin-care agents applied. Gloves must be inspected regularly and prior to each use. Replace if
necessary (e.g. pinhole leaks).
Form: liquid
Colour: yellow
Odour: product specific, amine-like
pH value:
neutral to slightly alkaline
:
The product has not been tested.
boiling temperature: approx. 260 °C
Other Information:
If necessary, information on other physical and chemical parameters is indicated in this section.
Page: 6/9
PT BASF Indonesia Safety data sheet
Date / Revised: 16.05.2013 Version: 1.0
Product: MBRACE SATURANT PTB
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
Substances to avoid:
strong acids, strong bases, strong oxidizing agents
Hazardous reactions:
The product is stable if stored and handled as prescribed/indicated.
Acute toxicity
Irritation
Assessment of mutagenicity:
The chemical structure does not suggest a specific alert for such an effect.
Carcinogenicity
Assessment of carcinogenicity:
The chemical structure does not suggest a specific alert for such an effect.
Reproductive toxicity
Developmental toxicity
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
Assessment of teratogenicity:
The substance caused malformations/developmental toxicity in laboratory animals.
----------------------------------
Repeated dose toxicity and Specific target organ toxicity (repeated exposure)
According to our knowledge the product can cause damage to health, corrosive burns and
sensitization. On the basis of results of animal tests, a risk of foetal damage must considered
probable The product has not been tested. The statements on toxicology have been derived from the
properties of the individual components.
Ecotoxicity
Mobility
Elimination information:
No data available.
Bioaccumulation potential
Bioaccumulation potential:
No data available concerning bioaccumulation.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for
recycling after being thoroughly cleaned.
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains
POLYOXYPROPYLENEDIAMINE, ISOPHORONEDIAMINE)
Sea transport
IMDG
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8
Marine pollutant: NO
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains
POLYOXYPROPYLENEDIAMINE, ISOPHORONEDIAMINE)
Air transport
IATA/ICAO
Hazard class: 8
Packing group: III
ID number: UN 1760
Hazard label: 8
Proper shipping name: CORROSIVE LIQUID, N.O.S. (contains
POLYOXYPROPYLENEDIAMINE, ISOPHORONEDIAMINE)
Hazard symbol(s)
C Corrosive.
T Toxic.
R-phrase(s)
R61 May cause harm to the unborn child.
R34 Causes burns.
R43 May cause sensitization by skin contact.
R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R62 Possible risk of impaired fertility.
R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in
the aquatic environment.
Page: 9/9
PT BASF Indonesia Safety data sheet
Date / Revised: 16.05.2013 Version: 1.0
Product: MBRACE SATURANT PTB
(30338182/SDS_GEN_ID/EN)
Date of print 18.05.2013
S-phrase(s)
S1/2 Keep locked-up and out of reach of children.
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S46 If swallowed, seek medical advice immediately and show this container
or label.
S53 Avoid exposure - obtain special instructions before use.
S61 Avoid release to the environment. Refer to special instructions/safety
data sheets.
Other regulations
If other regulatory information applies that is not already provided elsewhere in this safety data
sheet, then it is described in this subsection.
Vertical lines in the left hand margin indicate an amendment from the previous version.
The data contained in this safety data sheet are based on our current knowledge and experience and
describe the product only with regard to safety requirements. The data do not describe the product's
properties (product specification). Neither should any agreed property nor the suitability of the product for
any specific purpose be deduced from the data contained in the safety data sheet. It is the responsibility
of the recipient of the product to ensure any proprietary rights and existing laws and legislation are
observed.