Академический Документы
Профессиональный Документы
Культура Документы
Speaker
Quick Installation Guide LENS
(For Windows & Mac OS)
Infrared LED
Indoor Wireless IP Camera
ANT
AUDIO
OUT IN
WPS
ANT
Model: FI8918W
Colour:Black/White
Model: FI8909W
Colour:Black/White
Microphone DC 5V
Antenna
LAN
AUDIO
OU T IN
Input
√
Antenna
√
POE
×
ethernet cable.
3. Connect the power adapter to the camera.
FI8918W √ √ ×
Foscam cameras and NVRs require good security FI8909W × √ ×
FI8910E √ × √
practices to safeguard your privacy. You should
regularly change your camera or NVR password which is
8-10 numbers, letters, symbols combination.
Model: FI8918W Model: FI8909W
Colour:Black/White Colour:Black/White You should update your camera or NVR regularly. Make
sure your camera or NVR has the latest firmware
installed for your specific model and better experience.
V1.7
EQ891017
2 Software Installation
1. Insert the CD into the CD drive of your computer. Default user name
is admin with no
2. Go to the folder “Equipment Search Tool” and find the folder “For password.
If you use IE browser,
Windows OS”or “For Mac OS”. Copy and paste the Equipment Search select this login mode.
Tool file to your computer, or drag it onto your desktop.
If you use Firefox, Google
Chrome, Safari, select this
login mode.
CE Certificate Website: display the camera’s IP address in your LAN (Local Area Network).
http://www.foscam.com/company/ce-certificate.html
Note:
2. Double click the camera list here, and your default browser will There are three login methods. According to the figure prompted,
ShenZhen Foscam Intelligent Technology Co., Ltd open up to the camera’s login page. choose a different login mode.
www.foscam.com
4 Wireless Connection Settings 5 Remote Access
If you need to access your IP camera outside of your LAN, you need to
FI8910E don’t support WIFI. Click the SSID of router and SSID,
Encryption will be filled in the configure some settings on your router. Please follow the
Click Run.
1. Please choose “Device Management > Wireless LAN Settings”, click
following box automatically . corresponding steps:
“Wireless LAN Settings”. 1. Run the Equipment Search Tool, and assign an IP address for your
2. Enable “Using Wireless LAN” on the “Wireless LAN Settings” page. camera.
3. Click the Scan button and the camera will detect all WIFI devices
5. Click Run button, and re-login the camera, you can see the live video
around the area. It should also display your router in the list. Right click your camera and
on the interface. Enter the same share click Network Configuration.
4. Click the SSID of your router in the Wireless Network list, the key with your router.
7 Technical Support
80 80 192.168.1.107 If you have problems with your Foscam IP camera, please contact the
You can see the port of your camera here.
Foscam reseller you purchased from, or you can e-mail the Foscam
If you want to set Remote Access for several cameras on the same headquarter technical support team: tech@foscam.com .
network, you will need to change the HTTP port for each camera.
Here you have finished the Port
Forwarding setup.
Your valuable comments and suggestions on improving Foscam
products are welcomed !