Академический Документы
Профессиональный Документы
Культура Документы
(3-Button12-Bu'tton 6V)
Introduction
Arming Button @
Normal state: press button to arm the motorcycle in alarm mode
Normal state: press button one second or twice into mute.:arming mode
Driving state: Press button to exceed safely
Chirping state: Press the button once, stop chirping and return tbarming mode
Disarming Button cJ'
Arming state: press button to disarm the motorcycle temporarily. Press the button I second or press it
twice, disarm the motorcycle completely,
Driving State: Press button to stop the engine and disaJin the alarm system. '
Chirping State: press button to stop chirping tem-porarily and return to arming mode.
In driving state, press Vbutton, the light will flash 24 times, press any button to stop flashing;( for 3 buttons remote
only)
Stop siren temporary: press arm or disarm or panic button to make chirp disable temporarily, and the
motorcycle returns to arming mode; Press disarm for 1 second to stop siren and disarm the system.
Automatic rearming: in arming mode, press button unintentionally, the siren will 1 time and the light
will flash twice, the system is disarmed temporialy. If nobody turn ACC ON within 25 seconds, the light
will flash once and the system will return to the arming mode automatically. This function can avoid the
false disarming.
Disarming completely: in arming state, press button for 1 second or press it twice, the siren will chirp twice
and the direction light will flash forth simul-taneously. The system will be disarmed completely.
Stop engine w!th remote controller: In driving state, press disarm button once, the engine will stop at
once.
Warning to disarming state: 10 seconds after the motor-cycle parked, if the system is not armed, the sirei'
will chirp twice and the direction light will flash simul-taneously to warn YOU to arm the system.
will return to the fOImer state as soon as the power is supplied. .
Anti-hi,jacking-: When driving, press arm button for 2 seconds, the siren will sound sharply and the engine'
will be cut-off after 10 seconds. Then the siren will keep on and the lights flash quickly. Press disarm button
to stop it. ( for 2 button remote control only)
When driving,press panic button for 2 seconds, the siren will sound sharply and the engine will be cut-off
after J 0 seconds. Then the siren will keep on and the lights flash quickly. Press disarn1 button to stop it( for
3 button remote control only)
Function setting:
JP2: Short circuit: 2 button remote control
Open circuit: 3 button remote control
JP3: Short circuit: 4-tone siren
Open circuit: I-tone siren
Code learning procedure:Prcss the learning swith on the main unit for 2 seconds, the lights will flas!1 3
times and then keep on, the system enter into learning mode: press any button of the remote control within 3
seconds, the lights will fla.<;h3 times and then keep on, indicating that the remote has been learnt into the
system sucessfully. 4 remote controls can be learnt in the same time. If the remote control is learnt, all the
old remote control is cleared from the system for safety reason, they have to learn it again.
Attentions
Please replace the battery of remote controller when the remote controlling distance becomes shorter and the
Jightofthe remote controller becomes darket.
/