Академический Документы
Профессиональный Документы
Культура Документы
SYMPTOM:
PARTS
During a duplex job, the sound of paper slipping may be heard during the switchback stage.
CAUSE:
The tension on the tension belt is too high for the torque limiter. As a result, the reverse roller stops too
suddenly and the paper slips on the roller.
MECHANICAL
SOLUTION:
The parts listed have been modified to resolve this symptom. If the symptom is reported install the following
parts:
Belt Tension
Torque Limiter
Flange Pulley
Copyright 2007 RICOH Corporation. All rights reserved. tpc@r icoh -u sa. co m Page 1 of 2
Tech Service Bulletin No. B262/B284/B288/B292 – 004
5 101 23
2 104 107
1 101 103
22
18
6
16
12 107
19
17 20
101 106
14
15
7 102 4
8 108
11
102 25
103 24
10 105
21
9 3
106
102
8 101
11
2 34
12 26
27
13
30
29
28
27
101
104
REFERENCE
OLD PART NO. NEW PART NO. DESCRIPTION QTY INT PAGE ITEM
B8724111 B8724141 Bracket: Motor: Paper Feed 1 1 23 22
B8723231 B8723261 Roller: Reverse: Drive 1 1 23 28
- B7894257 Flange: Pulley 1 1 23 34*
* DENOTES NEW ITEM NUMBER
UNITS AFFECTED:
All Document Feeders listed below and manufactured after the serial numbers provided will have the new
parts installed during production.
B872 M047700175
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and NEW parts CAN NOT be used in OLD machines.
0 NEW machines.
2 OLD parts can be used in OLD and NEW machines.
NEW parts can be used in OLD and NEW machines. OLD parts CAN NOT be used in NEW machines.
1 OLD parts CAN NOT be used in NEW machines.
3 NEW parts CAN NOT be used in OLD machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S previously modified, use the new part numbers individually.
Page 2 of 2