Академический Документы
Профессиональный Документы
Культура Документы
The pressure and associated measurements (e.g., downhole flow) are interpreted to yield
reservoir dynamic parameters relevant to fluid flow, such as formation permeability, and any
formation damage. Wireline tests establish reservoir communication through one or more
pressure and sampling probes. In order to obtain good results the pressure pulse that is
propagated should be extended well beyond the near wellbore region, viscosity of the primary
fluid being investigated is known and Skin can be resolved for, hence the resulting mobility
thickness from the interpretation is skin independent.
With sufficient good quality and repeatable pressure data, the interpretation results in
a reliable estimate of the mobility of the flow unit being investigated.
Schlumberger-Private
1) To perform exhaustive data Qc: Discard dry and lost seal test, test with different
after and before hydrostatic pressures, supercharged tests, more than one drawdown period is
desirable, repeatability is an important plus, higher recovery volume higher the confidence,
longer periods are desirable.
A perfect match between this two data source is almost impossible to find.
Permeability from cores take into account only a small volume of the reservoir.
Meanwhile, WFT measurement is an average permeability in the near wellbore area
and is affected by heterogeneity. If differences are meaningful should not be ignored.
All data must be reasonably conciliated in geological and reservoir
model
Schlumberger-Private