Академический Документы
Профессиональный Документы
Культура Документы
+
Weighing Application Data Sheet
Email To: piabusales.industry@siemens.com or FAX TO: 972-522-4503 Date:
Instructions: Navigate through the form using the TAB key or mouse. To select a checkbox, click with mouse or press the SPACEBAR. To select units,
click and choose from drop-down menu.
Requestor Information Customer Information End-User Information
Process Information
Load, speed, rate and total Batch control Ratio controlled blending
Pre-feed: Rotary valve Belt Screw Vibratory pan Aerated gravity conveyor
W Conveyor width in mm
Preferred
model:
MBS MUS MCS MSI MMI MLC
Preferred construction: Painted mild steel 304 SS 316 SS Other
Installation (Solids Flow Meter)
Flow meter will discharge into: Headroom available: in ft mm m
Temp. at flow meter: max F C min F C Sense plate exposed to air flow: No Some
Estimated distance from pre-feed discharge to flow meter: in ft mm m
Preferred construction: Painted mild steel 304 SS 316 SS Other
Installation (Weighfeeder)
Condition of operating environment: Wash down Sanitary Corrosive
Duty cycle: Hours per day
Space limitations: Length: ft Width: in ft m Height: in ft m
Inlet dimensions: (LxW): in ft m Center length: ft (inlet to discharge)
Construction: Open Closed
Access side looking in direction of belt travel: Left Right Both
Transmitter
HART ® Foundation FB
Calibration
Accuracy Required: %
Disclaimer
The information contained in this data sheet is believed to be accurate however we do not assume any
responsibility for errors or any liability arising from the application or use of any product herein. This data
sheet neither states nor implies warranty of any kind, including fitness for any particular application.
Insert a photo or a sketch of the application, if available: Simply copy and paste into this table. Bitmaps
should be no larger than 640 X 48
0 Pixels.